Zheng Li - Publications, H-index & Citations

李正 (Zheng Li)

Dalian University of Technology

35H指数

318论文数

4.3K被引数

收录论文 136

发表时间

A Multiobjective Topology Optimization Method Based on Modified Hypervolume Increment 基于改进超体积增量的多目标拓扑优化方法

International Journal for Numerical Methods in Engineering

IF2.9

2026-09-19

PREAI

Zheng Li; Yongcheng Song; Xuyuan Miao; Shilun Ruan; Junfeng Gu; Genzi Li; Changyu Shen

Monotonic behaviour and capacity assessment of slotted-in steel-plate bolted glulam connections: effects of bolt diameter, spacing and load-to-grain orientation 槽口钢板的胶合木螺栓连接的单调行为和承载能力评估：螺栓直径、间距和荷载与木纹方向的影响

Journal of Building Engineering

IF7.4

2026-08-21

PREAI

Zheng Li; Zhiqiang Qin; Qifang Xie; Chao Yang; Lichao Wei

Post-tensioning force losses in post-tensioned CLT shear walls: Predictions and design methodology based on six-year experimental investigations 后张预应力损失在胶合层板剪力墙中的表现：基于六年实验研究的预测与设计方法

Journal of Building Engineering

IF7.4

2026-08-19

PREAI

Minjuan He; Yufan Ma; Xijun Wang; Haiyan Fu; Zheng Li

Long-term performance of dowel-type glulam joints under sustained gravity loads: Three-year experiment and hygro-mechanical coupled simulation 在持续重力荷载下叠层木销接头的长期性能：三年实验与湿-力耦合模拟

Structures

IF4.3

2026-07-16

PREAI

Xiuzhi Zheng; Minjuan He; Zheng Li

Microcontact-system dynamics coupling in friction systems: The role of surface topography in nonlinear dynamical behavior 摩擦系统中微接触-系统动力学的耦合：表面形貌在非线性动力学行为中的作用

Tribology International

IF6.9

2026-05-18

PREAI

Hongyi Liao; Suiyue Ma; Zheng Li; Jianwei Liu; Zaiyu Xiang; Bin Tang; Xiaocui Wang; Deqiang He

Nonlinear lateral behavior of conventional and post-tensioned CLT shear walls: An analytical method based on minimum energy principle 常规和后张预应力CLT剪力墙的非线性侧向行为：基于最小能量原理的解析方法

Engineering Structures

IF6.4

2026-05-18

PREAI

Qifei Zhang; Minjuan He; Zheng Li; Xijun Wang

Composite linear active disturbance rejection control method for the feedwater control system of the once-through steam generator in SPWR under the accident caused by complete seizure of the steam dump valve 小型压水堆一次通过式蒸汽发生器给水控制系统中，因蒸汽泄压阀完全卡死事故下的复合线性扰动估计与抑制控制方法

Progress in Nuclear Energy

IF3.2

2026-05-18

PREAI

Zheng Li; Jinze Yang; Chuqi Chen; Meng Zhao; Wenjie Zeng

Predicting progressive failure of nail-laminated timber-concrete composite floors under bending: An extended γ-method accounting for concrete cracking, connection degradation, and lamination failure 预测指接层压木-混凝土复合楼板在弯曲下的渐进失效：一种考虑混凝土开裂、连接退化及层压失效的扩展γ方法

Engineering Structures

IF6.4

2026-05-05

PREAI

Zheng Li; Wei Feng; Minjuan He; Xiaoyue Zhang

Mechanical performance of connections between cross-laminated timber (CLT) shear walls and nail-laminated timber (NLT) floors 交叉层压木材（CLT）剪力墙与钉合层压木材（NLT）楼板之间连接的力学性能

Engineering Structures

IF6.4

2026-04-28

PREAI

Xiaowei Qu; Zheng Li; Xijun Wang; Minjuan He

Experimental and finite element studies of 3D-printed concrete-glued laminated timber composite beams 3D打印混凝土-胶合层压木材复合梁的实验与有限元研究

Construction and Building Materials

IF8

2026-02-25

PREAI

Xiaoyue Zhang; Zhengren Chen; Xinting Zhou; Zheng Li; Yuxin Pan

HR-YOLO: Enhanced YOLO framework for infrared-based timber component damage detection in heritage arch lounge bridges

Infrared Physics & Technology

IF3.4

2026-01-14

PREAI

Zhiqiang Qin; Qifang Xie; Zheng Li

Life cycle carbon emissions of buildings considering wood biological carbon sequestration with a piecewise linear decoration model

WOOD MATERIAL SCIENCE & ENGINEERING

IF2.1

2026-01-01

PREAI

Li, Zheng; Zuo, Chunyang; Yi, Duhang; He, Minjuan; Shu, Zhan

Segmentation-based quantification of timber surface defects via improved YOLO-TDN and morphological measurement 基于改进的YOLO-TDN和形态测量的木材表面缺陷分割量化

WOOD MATERIAL SCIENCE & ENGINEERING

IF2.1

2026-01-01

PREAI

Qin, Zhiqiang; Xie, Qifang; Li, Zheng

Study on bending behavior of cross-laminated timber-glulam composite beam: Numerical simulation and theoretical analysis 交叉层压木材-胶合木复合梁弯曲行为的研究：数值模拟与理论分析

Structures

IF4.3

2025-12-17

PREAI

Xiaoyue Zhang; Zhengren Chen; Binjie Niu; Zheng Li; Xuhong Zhou

In situ reaction-strengthening of ice-templated porous geopolymers for high anisotropy and robustness 原位反应增强冰模板多孔地质聚合物以实现高各向异性和韧性

Cement and Concrete Research

IF13.1

2025-12-11

PREAI

Fangxian Li; Chaofeng Zhang; Qiang Yu; Li Zheng; Jiangxiong Wei; Qijun Yu

Numerical Modelling and Theoretical Analysis of Timber-Concrete Glued-in Threaded Rod Shear Connectors with and without Notches

BIORESOURCES

IF1.6

2025-11-01

PREAI

Yang, Chao; Ling, Zhibin; Li, Zheng; Qin, Zhigiang; Shen, Jie

Integrated machine learning framework for performance-based seismic assessment of post-tensioned steel-timber hybrid frames with energy-dissipating braces 基于能量耗散支撑的后张拉钢木组合框架的性能化地震评估集成机器学习框架

Advanced Engineering Informatics

IF9.9

2025-09-11

PREAI

Fei Chen; Zheng Li; Minghao Li

Experimental investigation into the flexural behavior of nail-laminated timber-concrete composite floors with dowel connections 钉连接层板胶合木-混凝土组合楼板的受弯性能实验研究

Journal of Building Engineering

IF7.4

2025-08-30

PREAI

Wei Feng; Minjuan He; Zheng Li

Real-Time Bidirectional Haptic Data Forecasting in Teleoperated Telemedicine Systems 遥操作远程医疗系统中的实时双向力反馈数据预测

IEEE Transactions on Medical Robotics and Bionics

IF3.8

2025-08-29

PREAI

Zijun Liao; Li Zheng; Xinru Xie; Hairui Wu; Fangjia Liu

Numerical Simulation and Fatigue Analysis of the Grout Layer Replacement for Horizontal Joint of Wind Turbine Prestressed Concrete Tower 水平风电机组预应力混凝土塔筒水平接头注浆层更换的数值模拟与疲劳分析

International Journal of Concrete Structures and Materials

IF3.6

2025-08-26

PREAI

Ziwei Wang; Dongping Huang; Minjuan He; Zheng Li

研究方向