logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
王

王亮 (Liang Wang)

qingdao agricultural university

46H指数
369论文数
8.8K被引数
收录论文 177
发表时间
logo
Performance Evolution and Microstructure Optimization of Recycled Fine Aggregate Rapid-Hardening Sulfoaluminate Cement Mortar by Nano-SiO2 Surface Modification通过纳米二氧化硅表面改性对再生细集料快硬硫铝酸盐水泥砂浆的性能演变和微观结构优化的研究
errNanomaterials
IF4.3
err2026-08-28
err0
errOAAI
errMeinan Wang; Shuo Liu; Cong Zhang; Yaning Wu; Liang Wang; Tieming Guo
err分享
err收藏
Effect of hot forging-annealing on microstructure and mechanical properties of lightweight refractory high-entropy alloys热锻-退火对轻质难熔高熵合金微观结构和力学性能的影响
errJournal of Alloys and Compounds
IF6.3
err2026-03-19
err0
PREAI
errBang Dou; Lei Chen; Xing Xiong; Xiaofei Gu; Jiaxiang Cui; Benpeng Wang; Shihai Sun; Liang Wang; Peng Zhang; Yunfei Xue
err分享
err收藏
Parameter study and multi-objective optimization for water jet guided laser drilling of SiC/SiC ceramic matrix compositesSiC/SiC陶瓷基复合材料的激光引导水射流钻孔参数研究及多目标优化
errJournal of Materials Research and Technology
IF6.6
err2025-12-09
err0
errOAAI
errJiayong Wei; Mengxuan Gao; Yanzhe Fu; Zichen Zhang; Hanling Wu; Wei Zhang; Liang Wang; Songmei Yuan
err分享
err收藏
Study on falling film in large-diameter tube and co-current gas-liquid heat transfer under high temperature and velocity of gas flow大直径管内降膜及高温高速气流条件下的气液同向流动传热研究
errChemical Engineering Research and Design
IF3.9
err2025-12-02
err0
PREAI
errLiang Wang; Xuan-xuan Huang; Yi-fei Wang; Guang-suo Yu
err分享
err收藏
High-temperature reactions and structural analysis of cohesive zone in a hydrogen-rich blast furnace based on liquid nitrogen-quenching and dissection基于液氮淬火和解剖的高温反应和富氢高炉中粘结区的结构分析
errJournal of Cleaner Production
IF10
err2025-11-12
err0
PREAI
errShuixin Ye; Liang Wang; Shutang Zhang; Pan Yang; Liang Lei; Yuwen Zhang; Wenhe Wu; Kai Zhu; Xionggang Lu
err分享
err收藏
Observation of a Knotted Electron Diffusion Region in Earth's Magnetotail Reconnection地球磁尾重联中一个打结电子扩散区的观测
errGeophysical Research Letters
IF4.6
err2025-10-13
err0
errOAAI
errXinmin Li; Chuanfei Dong; Hantao Ji; Chi Zhang; Liang Wang; Barbara Giles; Hongyang Zhou; Rui Chen; Yi Qi
err分享
err收藏
Split Hopkinson pressure bar and Taylor impact responses of dual-phase high-entropy alloy Al0.3CoCrFeNiTi0.3: Experiments and constitutive modeling双相高熵合金Al0.3CoCrFeNiTi0.3的Split Hopkinson压力杆和Taylor冲击响应：实验与本构建模
errJournal of Alloys and Compounds
IF6.3
err2025-09-11
err0
PREAI
errX. Xu; L. Wang; S.H. Guo; C. Li; N.B. Zhang; Q.C. Liu; L.X. Li; J. Xu; S.N. Luo
err分享
err收藏
Ultra-low solid content porous alumina ceramics with high strength prepared from stable wet foam通过稳定湿泡沫制备的超低固含量高强度多孔氧化铝陶瓷
errCeramics International
IF5.6
err2025-09-05
err0
PREAI
errBiao Yang; Liang Wang; Bo Yin; Han Chen; Yifeng Zheng
err分享
err收藏
Pulsed-switchable strategy and relative-pressure control optimizing multi-ceramics 3D printing integrated with laser-assisted curing脉冲切换策略与相对压力控制优化多陶瓷3D打印集成激光辅助固化
errAdditive Manufacturing
IF11.1
err2025-08-26
err0
PREAI
errChaoqian Zhao; Tingbiao Wang; Jiawei Zhou; Defu Liu; Yong Hu; Liang Wang; Qunli Zhang; Yufang Zhu; Jianhua Yao
err分享
err收藏
Enhancing the fragmentation with retaining a high ultimate dynamic tensile strength in the Ti-Zr-Hf-Nb-Ta energetic high-entropy alloys via interfacial precipitation通过界面析出增强Ti-Zr-Hf-Nb-Ta高熵合金的碎裂，同时保持其高最终动态抗拉强度。
errmaterials science materials in engineering
IF0
err2025-08-19
err0
PREAI
errHaoyan Yang; Jin Wang; Xing Xiong; Hui Li; Benpeng Wang; Liang Wang; Xun Guo; Fei Xing; Mingbin Sui; Zening Cao; Yunfei Xue
err分享
err收藏
Hybrid Laser Cleaning of Carbon Deposits on N52B30 Engine Piston Crowns: Multi-Objective Optimization via Response Surface MethodologyN52B30发动机活塞顶碳沉积的混合激光清洗：基于响应面法的多目标优化
errmaterials
IF0
err2025-08-05
err0
errOAAI
errYishun Su; Liang Wang; Zhijun Chen; Jiawei Duan; Tingqing Ye; Jianhua Yao
err分享
err收藏
Association of cardiometabolic index and depressive symptoms with cardiovascular and cerebrovascular diseases in middle-aged and older adults: A national prospective cohort study中老年人心血管代谢指数与抑郁症状与心血管疾病和脑血管疾病的关系：一项国家前瞻性队列研究
errJournal of Affective Disorders
IF4.9
err2025-07-18
err0
PREAI
errXiaopeng Cui; Yunsheng Zhang; Yujing Jin; Zhuolin Wu; Ying Gao; Haiyan Su; Qing Zhang; Liang Wang; Xinyu Yang
err分享
err收藏
The influence of different water-assisted methods on femtosecond laser layered- ring trepanning in silicon nitride ceramics不同水辅助方法对氮化硅陶瓷飞秒激光分层环状钻孔的影响
errOPTICS AND LASER TECHNOLOGY
IF5
err2025-07-01
err0
PREAI
errRen, Naifei; Yao, Song; Wu, Zhen; Zheng, Yuanjie; Di, Jianke; Wang, Liang; Xia, Kaibo
err分享
err收藏
Novel mechanism of ultra-high adiabatic shear susceptibility in FCC-based high-entropy alloys via high-content nanoprecipitate dissolutionFCC基高熵合金中超高绝热剪切敏感性新机制：通过高含量纳米析出相溶解实现
errActa Materialia
IF9.3
err2025-06-20
err0
PREAI
errYao Xiao; Qinglei Zeng; Kaihui Xun; Jun Ding; Linjing Wang; Liang Wang; Yaojian Liang; Ke Jin; Shengxin Zhu; Yang Ren; Gang Sha; Lu Wang; Haosen Chen; Yunfei Xue
err分享
err收藏
Enhancing strength and toughness of 7xxx aluminum alloys via TiC nanoparticles in electron beam rapid additive manufacturing通过TiC纳米颗粒在电子束快速增材制造中提升7xxx铝合金的强度和韧性
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-06-01
err0
PREAI
errYao, Longhui; Wang, Liang; Cui, Ran; Lv, Qi; Zhao, Chunzhi; Wang, Xuan; Guan, Shuai; Luo, Liangshun; Lai, Qi; Chen, Ruirun; Guo, Jingjie
err分享
err收藏
Effect of electron beam impact force on melt pool behavior电子束冲击力对熔池行为的影响
errInternational Journal of Mechanical Sciences
IF9.4
err2025-05-30
err0
PREAI
errQi Lv; Liang Wang; Chen Liu; Baoxian Su; Lei Luo; Binbin Wang; Qi Lai; Longhui Yao; Liangshun Luo; Ruirun Chen; Yanqing Su
err分享
err收藏
Regulating heat input for additive manufacturing of oxide inclusions-free ODS-FeCrAl steel调节氧化物夹杂-free ODS-FeCrAl钢增材制造过程中的热输入
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-05-01
err0
errOAAI
errWang, Yanan; Peng, Yan; Wang, Binbin; Su, Baoxian; Luo, Liangshun; Wang, Liang; Su, Yanqing; Guo, Jingjie; Fu, Hengzhi
err分享
err收藏
High temperature oxidation behavior of TiNbMoAlSi refractory high entropy alloy developed by electron beam additive manufacturing
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2025-04-01
err0
PREAI
errLi, Zhe; Wang, Liang; Yang, Yong; Liu, Chen; Su, Baoxian; Zhang, Qingda; Li, Zhiwen; Huang, Jiaqi; Wang, Binbin; Luo, Liangshun; Chen, Ruirun; Su, Yanqing
err分享
err收藏
Microstructure, room temperature mechanical properties and creep behavior of hot extruded Zn-1Mg alloy with different Mn content
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2025-04-01
err0
PREAI
errSun, Shineng; Zheng, Yiheng; Duan, Mingxin; Ren, Yuping; Wang, Liang
err分享
err收藏
Simultaneous improvement in strength and ductility of 3D-printed refractory high-entropy alloys by addition of molybdenum
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-04-01
err0
PREAI
errLiu, Shien; Dou, Bang; Sun, Shihai; Wang, Liang; Liang, Yao-Jian; Xue, Yunfei
err分享
err收藏

研究方向

电力系统稳定性分析与控制可再生能源的优化控制与消纳
合作学者
合作期刊
谷林 封面图
谷林 (Lin Gu)
H 指数: 201 · 论文数: 1.8K
R
Richard H. Friend
H 指数: 195 · 论文数: 1.5K
S
Shi Xue Dou
H 指数: 187 · 论文数: 2.6K
K
Khalil Amine
H 指数: 180 · 论文数: 1.2K
卢
卢钧 (Jun Lü)
H 指数: 164 · 论文数: 1.1K
查看更多