Pi‐Cheng Tung - Publications, H-index & Citations

Pi‐Cheng Tung

National Central University

23H指数

134论文数

1.8K被引数

收录论文 43

发表时间

Microstructural and Comparative Analysis for Wire Electric Discharge Machining on Edge Trimming of Semi-Insulating Silicon Carbide Wafers 线切割电火花加工对半绝缘碳化硅晶圆边缘修整的微观结构和比较分析

Materials Today Communications

IF4.5

2026-09-12

OAAI

Hoang-Tien Cao; Jeng-Rong Ho; Yuan-Ting Lin; Pi-Cheng Tung; Chih-Kuang Lin

Characterization of machined surface in semi-conductive SiC wafer subjected to micro-EDM drilling

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING

IF4.6

2025-03-01

PREAI

Cao, Hoang-Tien; Ho, Jeng-Rong; Tung, Pi-Cheng; Tsui, Hai-Ping; Lin, Chih-Kuang

Innovative laser-assisted glass bending approaches using a near-infrared continuous wave laser

OPTICS AND LASERS IN ENGINEERING

IF3.7

2024-07-01

PREAI

Liao, Wei -Xiang; Lee, Wei -Ting; Lin, Chih-Kuang; Tung, Pi-Cheng; Ho, Jeng-Rong

Microstructures and mechanical properties of copper-to-glass laser transmission welding employing a nanosecond pulsed laser

CERAMICS INTERNATIONAL

IF5.6

2024-06-01

PREAI

Nguyen, Hoai; Lin, Chih-Kuang; Tung, Pi-Cheng; Ho, Jeng-Rong

Effects of TiN content and heat treatment on microstructural changes, mechanical strength, and corrosion resistance in selective laser melting of TiN/AISI 420 composites

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-05-01

PREAI

Tran, Duc; Lin, Chih-Kuang; Tung, Pi-Cheng; Lin, Chin-Te; Ho, Jeng-Rong; Iizuka, Yoshiyuki; Tsao, I. -Yu; Le, Thanh-Long

Enhancing mechanical properties of selective-laser-melting TiN/AISI 420 composites through Taguchi GRA and PCA multi-response optimization

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-03-01

OAAI

Tran, Duc; Lin, Chih-Kuang; Tung, Pi-Cheng; Ho, Jeng-Rong; Le, Thanh-Long

Fatigue crack growth behavior of selective laser melted martensitic stainless steel

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-02-01

PREAI

Jiang, Chong-Ming; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Chih-Kuang

Machined quality prediction and optimization for micro-EDM drilling of semi-conductive SiC wafer

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING

IF4.6

2024-01-01

PREAI

Cao, Hoang-Tien; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Yuan-Ting; Lin, Chih-Kuang

Enhancing Mechanical and Corrosion Properties of AISI 420 with Titanium-Nitride Reinforcement through High-Power-Density Selective Laser Melting Using Two-Stage Mixed TiN/AISI 420 Powder

MATERIALS

IF3.2

2023-06-05

OAAI

Tran, Duc; Lin, Chih-Kuang; Tung, Pi-Cheng; Ho, Jeng-Rong; Jang, Jason Shian-Ching; Lin, Jing-Chie; Tsao, I-Yu; Le, Thanh-Long

Formation of subsurface Cu-O-Si system through laser-induced plasma-assisted copper penetration for fabricating robust adhesive copper wire on glass substrate

APPLIED SURFACE SCIENCE

IF6.9

2023-01-01

PREAI

Wei, Kai; Lin, Chih-Kuang; Tung, Pi-Cheng; Ho, Jeng-Rong; Tsao, I-Yu

Prediction and optimization of dross formation in laser cutting of electrical steel sheet in different environments

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2022-05-01

OAAI

Rohman, Muhamad Nur; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Chin-Te; Lin, Chih-Kuang

A Hybrid PSO-GWO Fuzzy Logic Controller with a New Fuzzy Tuner

INTERNATIONAL JOURNAL OF FUZZY SYSTEMS

IF3.6

2021-11-28

PREAI

Dinh-Tu Nguyen; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Chih-Kuang

Effects of Laser Spot Size on the Mechanical Properties of AISI 420 Stainless Steel Fabricated by Selective Laser Melting 激光光斑尺寸对选区激光熔化成形AISI 420不锈钢力学性能的影响

MATERIALS

IF3.2

2021-08-16

OAAI

Yang, Xi-Huai; Jiang, Chong-Ming; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Chih-Kuang

Effects of Build Direction on the Mechanical Properties of a Martensitic Stainless Steel Fabricated by Selective Laser Melting 构建方向对激光选区熔化马氏体不锈钢力学性能的影响

MATERIALS

IF3.2

2020-11-15

OAAI

Shen, Ling-Chieh; Yang, Xi-Huai; Ho, Jeng-Rong; Tung, Pi-Cheng; Lin, Chih-Kuang

An extreme learning machine for predicting kerf waviness and heat affected zone in pulsed laser cutting of thin non-oriented silicon steel 用于预测薄无取向硅钢脉冲激光切割中切口波纹度和热影响区的极限学习机

OPTICS AND LASERS IN ENGINEERING

IF3.7

2020-11-01

PREAI

Tan Hoai Nguyen; Lin, Chih-Kuang; Tung, Pi-Cheng; Cuong Nguyen-Van; Ho, Jeng-Rong

Linear Displacement Calibration System Integrated with a Novel Auto-Alignment Module for Optical Axes

SENSORS

IF3.5

2020-04-26

OAAI

Shih, Yi-Chieh; Tung, Pi-Cheng; Wang, Yung-Cheng; Shyu, Lih-Horng; Manske, Eberhard

Fabry-Perot displacement interferometer for the measuring range up to 100 mm

MEASUREMENT

IF5.6

2013-12-01

PREAI

Chang, Chung-Ping; Tung, Pi-Cheng; Shyu, Lih-Horng; Wang, Yung-Cheng; Manske, Eberhard

Total Design of an FPGA-Based Brain-Computer Interface Control Hospital Bed Nursing System

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS

IF7.2

2013-07-01

PREAI

Shyu, Kuo-Kai; Chiu, Yun-Jen; Lee, Po-Lei; Lee, Ming-Huan; Sie, Jyun-Jie; Wu, Chi-Hsun; Wu, Yu-Te; Tung, Pi-Cheng

Suppression of Hunting in an ILPMSM Driver System Using Hunting Compensator 使用狩猎补偿器抑制ILPMSM驱动系统中的狩猎

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS

IF7.2

2013-07-01

PREAI

Yao, Wei-Hann; Tung, Pi-Cheng; Fuh, Chyun-Chau; Chou, Fu-Chu

A robust disturbance reduction scheme for linear small delay systems with disturbances of unknown frequencies 具有未知频率扰动的线性小时滞系统的鲁棒扰动抑制方案

ISA TRANSACTIONS

IF6.5

2012-05-01

PREAI

Tsai, Ming-Hau; Tung, Pi-Cheng

研究方向