logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
A

Alokesh Pramanik

school of civil and mechanical engineering

51H指数
332论文数
9.7K被引数
收录论文 84
发表时间
logo
Resistance spot welding of dissimilar maraging steel and 4340 steel: correlation between microstructural analysis and mechanical performance异种马氏体时效钢与4340钢的电阻点焊：微观结构分析与力学性能之间的关系
errInternational Journal of Advanced Manufacturing Technology
IF3.1
err2026-09-09
err0
errOAAI
errBharat Behl; Yu Dong; Animesh Kumar Basak; Alokesh Pramanik; Tapas Kumar Bandyopadhyay
err分享
err收藏
Influence of Acetabular Cup Elevation Height on Contact and Failure Analysis of Metal-on-Metal Hip Prosthesis Under Mild and Severe Microseparations for Regular and Risky Gait Loads髋臼杯抬升高度对金属对金属髋关节假体在正常和危险步态载荷下微分离程度对接触和失效分析的影响
errJOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
IF3
err2026-05-01
err0
PREAI
errNithyaprakash, R.; Shankar, S.; Naveen Kumar, R.; Mithun Krishna, J.; Thangarasu, S. K.; Abbas, G.; Sugunesh, A. P.; Prakash, Chander; Pramanik, Alokesh; Basak, Animesh Kumar; Manikandan, M.; Kalayarasan, M.
err分享
err收藏
Additive Manufacturing of Discontinuous Carbon Fibre-Reinforced Polymer (CFRP): A Study on Parametric Optimization Towards Mechanical Properties碳纤维增强聚合物（CFRP）增材制造：面向力学性能的参数优化研究
errPolymers
IF4.9
err2026-04-27
err0
errOAAI
errAhmed Degnah; Abdulaziz Kurdi; Alokesh Pramanik; Animesh Kumar Basak
err分享
err收藏
Investigation and comparison of the dimensional accuracy and mechanical properties of 17-4PH stainless steel fabricated using BMD and ADAM additive manufacturing采用BMD和ADAM增材制造制备的17-4PH不锈钢的尺寸精度和力学性能的探究与比较
errInternational Journal of Interactive Design and Manufacturing - IJIDeM
IF2.5
err2026-02-01
err0
PREAI
errTitus, Abel Cedric; Pramanik, Alokesh; Basak, Animesh Kumar; Prakash, Chander; Shankar, Subramaniam; Dixit, Amit Rai; Radhika, N.; Kumar, Sandeep; Goh, Khang Wen
err分享
err收藏
Advancing Circular Additive Manufacturing: Life Cycle Sustainability Assessment of Gears Made from Recycled Polylactic Acid
errMaterials Today Sustainability
IF7.9
err2026-01-17
err0
errOAAI
errMohammad Raquibul Hasan; Ian J. Davies; Alokesh Pramanik; Michele John; Wahidul K. Biswas
err分享
err收藏
Mycobacterium avium Subspecies paratuberculosis Infection and Immunopathological Changes in Animals: A ReviewMycobacterium avium Subspecies paratuberculosis感染与动物免疫病理变化：综述
errINDIAN JOURNAL OF ANIMAL RESEARCH
IF0.5
err2025-12-01
err0
PREAI
errKumar, M.; Chaubey, K. K.; Dayal, D.; Singh, S. V.; Sharma, S.; Goyal, U.; Tyagi, S.; Pramanik, A.
err分享
err收藏
Evolution of Microstructures and Mechanical Properties of Laser-Welded Maraging Steel for Aerospace Applications: The Past, Present, and Future Prospect航空应用中马氏体时效钢激光焊接接头微观结构与力学性能的演变：过去、现状与未来展望
errJournal of Manufacturing and Materials Processing
IF3.3
err2025-11-30
err0
errOAAI
errBharat Behl; Yu Dong; Alokesh Pramanik; Tapas Kumar Bandyopadhyay
err分享
err收藏
Bio-Inspired Novel Joints with Superior Mechanical Performance仿生新型高性能关节
errJournal of Composites Science 2025, Vol. 9, Page 501
IF3.7
err2025-09-27
err0
errOAAI
errKhishigdorj Davaasambuu; Animesh Kumar Basak; Yu Dong; Alokesh Pramanik
err分享
err收藏
Engineering biocompatibility and mechanical performance via heat treatment of LPBF-fabricated Ti-6Al-4V for next-generation implants通过热处理改善增材制造的Ti-6Al-4V的工程生物相容性和力学性能以用于下一代植入物
errJournal of Manufacturing Processes
IF6.8
err2025-09-02
err0
PREAI
errPratik Kumar Shaw; Suryank Dwivedi; Amit Rai Dixit; Alokesh Pramanik
err分享
err收藏
An Experimental and Simulation Study on the Effect of Adhesive in Weld Bonded Spot Weld Joints关于胶粘剂在焊点焊缝中的效果的实验与仿真研究
errMetals 2025, Vol. 15, Page 938
IF2.5
err2025-08-24
err0
PREAI
errAravinthan Arumugam; Cosmas Pandit Pagwiwoko; Alokesh Pramanik; Animesh Kumar Basak
err分享
err收藏
Mechanisms and Performance of Composite Joints Through Adhesive and Interlocking Means—A Review复合接头通过胶接和锁定方式的机理与性能——综述
errJournal of Composites Science 2025, Vol. 9, Page 359
IF3.7
err2025-08-22
err0
PREAI
errKhishigdorj Davaasambuu; Yu Dong; Alokesh Pramanik; Animesh Kumar Basak
err分享
err收藏
The effect of material intrinsic properties on the quality of machined surface during laser beam cutting材料固有属性对激光束切割加工表面质量的影响
errMATERIALS CHEMISTRY AND PHYSICS
IF4.7
err2025-05-01
err0
errOAAI
errBasak, Animesh Kumar; Lightbody, Keith; Pramanik, Alokesh
err分享
err收藏
Recycling Post-Consumed Polylactic Acid Waste Through Three-Dimensional Printing: Technical vs. Resource Efficiency Benefits
errSUSTAINABILITY
IF3.3
err2025-03-12
err0
errOAAI
errHasan, Mohammad Raquibul; Davies, Ian J.; Pramanik, Alokesh; John, Michele; Biswas, Wahidul K.
err分享
err收藏
Experimental study on microstructural and corrosion behaviors of friction stir processed steel with CoCrFeCuTi HEA reinforcement and effect of annealing
errSCIENCE CHINA-TECHNOLOGICAL SCIENCES
IF4.9
err2024-12-31
err0
PREAI
errKrishna, S. Aravind; Radhika, N.; Pramanik, Alokesh; Jeyaprakash, N.
err分享
err收藏
Compressive mechanical properties of thermal sprayed AlCoCrFeNi high entropy alloy coating热喷涂AlCoCrFeNi高熵合金涂层的压缩力学性能
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2024-10-01
err8
errOAAI
errBasak, Animesh Kumar; Kurdi, Abdulaziz; Radhika, Nachimuthu; Arputharaj, John; Prakash, Chander; Pramanik, Alokesh; Shankar, Subramanian
err分享
err收藏
Mechanical and Shape Memory Properties of Additively Manufactured Polyurethane (PU)/Halloysite Nanotube (HNT) Nanocomposites
errNANOMATERIALS
IF4.3
err2024-08-22
err0
errOAAI
errNugroho, Wendy Triadji; Dong, Yu; Pramanik, Alokesh
err分享
err收藏
Bound metal deposition of stainless steel 316L: Effect of process variables on microstructural and mechanical behaviors
errMATERIALIA
IF2.9
err2024-08-01
err1
errOAAI
errBasak, Animesh K.; Pramanik, Alokesh; Chen, Yeong X.; Prakash, Chander; Radhika, N.; Shankar, S.
err分享
err收藏
Tool Condition Monitoring in the Milling Process Using Deep Learning and Reinforcement Learning
errJOURNAL OF SENSOR AND ACTUATOR NETWORKS
IF4.2
err2024-07-30
err6
errOAAI
errKaliyannan, Devarajan; Thangamuthu, Mohanraj; Pradeep, Pavan; Gnansekaran, Sakthivel; Rakkiyannan, Jegadeeshwaran; Pramanik, Alokesh
err分享
err收藏
Additive Manufacturing in Australian Small to Medium Enterprises: Vat Polymerisation Techniques, Case Study and Pathways to Industry 4.0 Competitiveness
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2023-09-14
err6
errOAAI
errRooney, Kimberley; Dong, Yu; Pramanik, Alokesh; Basak, Animesh Kumar
err分享
err收藏
Co-Influence of Nanofiller Content and 3D Printing Parameters on Mechanical Properties of Thermoplastic Polyurethane (TPU)/Halloysite Nanotube (HNT) Nanocomposites
errNANOMATERIALS
IF4.3
err2023-06-29
err5
errOAAI
errNugroho, Wendy Triadji; Dong, Yu; Pramanik, Alokesh; Zhang, Zhixiao; Ramakrishna, Seeram
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
S
Seeram Ramakrishna
H 指数: 197 · 论文数: 2.4K
L
Lai‐Chang Zhang
H 指数: 95 · 论文数: 524
J
Jinsong Leng
H 指数: 95 · 论文数: 840
C
Changhe Li
H 指数: 89 · 论文数: 635
R
R.A. Ilyas
H 指数: 82 · 论文数: 541
查看更多