Zhenqiang Yao - Publications, H-index & Citations

姚

姚振强 (Zhenqiang Yao)

Shanghai Jiao Tong University

28H指数

133论文数

2.5K被引数

收录论文 50

发表时间

Efficient Joint Identification Based on Neural Networks and Its Application in the Tool–Collet–Holder System 基于神经网络的高效关节识别及其在刀具-刀柄-刀盘系统中的应用

Processes

IF2.8

2026-06-10

OAAI

Zhenrong Tang; Xifang Zhang; Zhenqiang Yao

Identification and Monitoring of Wear Stages in GCr15 with Acoustic Emission Signals via Variational Mode Decomposition 通过变分模态分解利用声发射信号识别和监测GCr15的磨损阶段

Journal of Failure Analysis and Prevention

IF1.2

2026-05-01

PREAI

Cui, Yuyang; Li, Xiaohang; Du, Haifeng; Yao, Zhenqiang; Huang, Xinye; Tang, Zhenrong; Hou, Zhibao

Study of Sub-micron Bulges on RB-SiC Induced with Femtosecond Laser Irradiation under the Ablation Threshold 亚微米凸起在低于烧蚀阈值下由飞秒激光辐照诱导的RB-SiC上的研究

Ceramics International

IF5.6

2026-04-14

PREAI

Yuchen Lou; Zixuan Qie; Xifang Zhang; Zhenqiang Yao

Influence of siliconizing temperature on microstructure and residual stress of SiC/Si/graphite composites fabricated by liquid phase silicon infiltration 液相硅浸渗法制备的SiC/Si/石墨复合材料的硅化温度对其微观结构和残余应力的影响

Ceramics International

IF5.6

2026-03-02

PREAI

Haifeng Du; Zhibao Hou; Zhenqiang Yao

Correction: Ye, G.; Yao, Z. Research on the Trajectory and Relative Speed of a Single-Sided Chemical Mechanical Polishing Machine. Micromachines 2025, 16, 450 更正: 叶，G.; 姚，Z。单面化学机械抛光机运动轨迹和相对速度的研究Micromachines 2025、16、450

Micromachines

IF3

2026-01-27

OAAI

Guoqing Ye; Zhenqiang Yao

Influence of different gas environments on the morphology and optical properties of SiC/SiO2 powder coatings prepared by femtosecond laser 不同气体环境对飞秒激光制备的SiC/SiO2粉末涂层形貌和光学性质的影响

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

IF2.8

2025-11-21

PREAI

Qie, Zixuan; Lou, Yuchen; Zhang, Xifang; Yao, Zhenqiang

Surface polishing of silicon carbide ceramics with water film-assisted femtosecond laser via gradient attenuation 通过梯度衰减的水膜辅助飞秒激光对碳化硅陶瓷进行表面抛光

Ceramics International

IF5.6

2025-11-17

PREAI

Xifang Zhang; Zixuan Qie; Yuchen Lou; Zhenqiang Yao

Characterization of ductile–brittle transition in silicon carbide grinding using VMD–PSO decomposed acoustic emission signals 碳化硅磨削中延性-脆性转变特性的表征：基于VMD–PSO分解的声发射信号

Measurement

IF5.6

2025-09-12

PREAI

Xiaohang Li; Zhenqiang Yao; Zhibao Hou; Haifeng Du; Yu Xie; Yuchen Lou

Research on the Trajectory and Relative Speed of a Single-Sided Chemical Mechanical Polishing Machine 单面化学机械抛光机轨迹与相对速度的研究

MICROMACHINES

IF3

2025-04-10

OAAI

Ye, Guoqing; Yao, Zhenqiang

Wear mechanism and three-phase synergistic effect of self-mated SiC/Si/ graphite composites in unlubricated sliding 自配SiC/Si/石墨复合材料无润滑滑动磨损机理及三相协同效应

WEAR

IF6.1

2025-03-01

PREAI

Du, Haifeng; Hou, Zhibao; Tang, Zhenrong; Yao, Zhenqiang

A novel identification method for grinding chatter based on multifractal theory and variational mode decomposition 基于多重分形理论和变分模态分解的磨削颤振新型识别方法

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

IF3.1

2025-02-25

PREAI

Wu, Han; Zhang, Xifang; Yao, Zhenqiang

Research on Deflection and Stress Analyses and the Improvement of the Removal Uniformity of Silicon in a Single-Sided Polishing Machine Under Pressure 单面抛光机在压力下的挠度和应力分析及提高硅去除均匀性的研究

MICROMACHINES

IF3

2025-02-08

OAAI

Ye, Guoqing; Yao, Zhenqiang

Surface generation and material removal mechanism incorporated with the randomness of grain size and distribution in grinding

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2024-03-01

PREAI

Li, Xin; Zhang, Xueping; Yao, Zhenqiang

Investigation on the crystal plasticity of α phase Ti-6Al-4V based on nano-indentation simulation and experiment

MATERIALS CHARACTERIZATION

IF5.5

2023-09-01

PREAI

Yang, P. Q.; Zhang, X. P.; Yao, Z. Q.; Shivpuri, R.

Material Removal Capability and Profile Quality Assessment on Silicon Carbide Micropillar Fabrication with a Femtosecond Laser 飞秒激光对碳化硅微柱制造的材料去除能力和轮廓质量评估

MATERIALS

IF3.2

2022-12-27

OAAI

Zhang, Xifang; Hou, Zhibao; Song, Jiacheng; Jin, Zhiyi; Yao, Zhenqiang

Investigation of Strain Fatigue Behavior for Inconel 625 with Laser Shock Peening

MATERIALS

IF3.2

2022-10-18

OAAI

Sun, Yaofei; Wu, Han; Du, Haifeng; Yao, Zhenqiang

Force modeling for 2D freeform grinding with infinitesimal method 用无穷小法进行二维自由曲面磨削的力建模

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2021-10-01

PREAI

Wu, Han; Yao, Zhenqiang

Efficient process planning of laser peen forming for complex shaping with distributed eigen-moment

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2020-05-01

PREAI

Luo, Mingsheng; Hu, Yongxiang; Hu, Lan; Yao, Zhenqiang

Mechanism of pressure oscillation in Taylor-Couette-Poiseuille flow with abruptly contracting and expanding annular gap

PHYSICS OF FLUIDS

IF4.3

2019-07-16

PREAI

Luo, Guohu; Yao, Zhenqiang; Shen, Hong

Distortion control of thin sections by single-sided laser peening

OPTICS AND LASERS IN ENGINEERING

IF3.7

2019-04-01

PREAI

Yang, Ruoyu; Hu, Yongxiang; Luo, Mingsheng; Cheng, Han; Yao, Zhenqiang

研究方向