Yong‐Taek Im

KIMM

31H指数

228论文数

3.2K被引数

收录论文 69

发表时间

Analyzing the effects of helical flow in blood vessels using acoustofluidic-based dynamic flow generator

ACTA BIOMATERIALIA

IF9.6

2024-03-01

OAAI

Kwak, Daesik; Im, Yongtaek; Nam, Hyeono; Nam, Ungsig; Kim, Seunggyu; Kim, Woohyuk; Kim, Hyun Jin; Park, Jinsoo; Jeon, Jessie S.

Antibiotic susceptibility test under a linear concentration gradient using travelling surface acoustic waves

LAB ON A CHIP

IF5.4

2021-01-01

PREAI

Im, Yongtaek; Kim, Seunggyu; Park, Jinsoo; Sung, Hyung Jin; Jeon, Jessie S.

Effect of continuous hybrid process on mechanical and electrical properties of rectangular pure copper wire 连续混合工艺对矩形纯铜线力学性能和电学性能的影响

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2017-06-01

PREAI

Joo, Ho Seon; Hwang, Sun Kwang; Kim, Yong Nam; Im, Yong-Taek

Mesoscopic coupled modeling of texture formation during recrystallization considering stored energy decomposition

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2017-03-01

OAAI

Kim, Dong-Kyu; Woo, Wanchuck; Park, Won-Woong; Im, Yong-Taek; Rollett, Anthony

Residual stress characteristics in a non-circular drawing sequence of pearlitic steel wire

METALS AND MATERIALS INTERNATIONAL

IF4

2016-10-30

PREAI

Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Im, Yong-Taek

Effects of processing parameters on elastic deformation of the coil during the thin-strip coiling process

METALS AND MATERIALS INTERNATIONAL

IF4

2016-05-26

PREAI

Park, Won-Woong; Kim, Dong-Kyu; Im, Yong-Taek; Kwon, Hyuck-Cheol; Chun, Myung-Sik

Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2015-04-01

PREAI

Kim, Dong-Kyu; Kim, Jae-Min; Park, Won-Woong; Lee, Ho Won; Im, Yong-Taek; Lee, Yong-Shin

Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires

METALS AND MATERIALS INTERNATIONAL

IF4

2015-03-12

PREAI

Hwang, Sun Kwang; Baek, Hyun Moo; Joo, Ho Seon; Im, Yong-Taek

The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2015-02-01

PREAI

Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min

The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire

MATERIALS & DESIGN

IF7.9

2014-10-01

PREAI

Baek, Hyun Moo; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min

The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2014-07-01

PREAI

Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min; Lee, Ho Won

The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel 多道次非圆拉拔顺序对低碳钢力学性能及组织演变的影响

MATERIALS & DESIGN

IF7.9

2014-03-01

PREAI

Lee, Jung Wan; Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Bae, Chul Min; Im, Yong-Taek

The effect of Microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2014-02-01

PREAI

Hwang, Sun Kwang; Baek, Hyun Moo; Lee, Jung Wan; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min

Numerical study of the effect of prior deformation history on texture evolution during equal channel angular pressing

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2014-01-01

PREAI

Kim, Dong-Kyu; Jung, Kyung-Hwan; Park, Won-Woong; Im, Yong-Taek; Lee, Yong-Shin

The effect of microstructure and texture evolution on mechanical properties of low-carbon steel processed by the continuous hybrid process

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2013-09-01

PREAI

Hwang, Sun Kwang; Baek, Hyun Moo; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min

Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2013-03-01

PREAI

Jung, Kyung-Hwan; Kim, Dong-Kyu; Im, Yong-Taek; Lee, Yong-Shin

High-strength bolt-forming of fine-grained aluminum alloy 6061 with a continuous hybrid process

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2012-08-01

PREAI

Kim, Ji Hun; Hwang, Sun Kwang; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min

Continuous high strength aluminum bolt manufacturing by the spring-loaded ECAP system

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2012-04-01

PREAI

Jin, Young Gwan; Baek, Hyun Moo; Hwang, Sun Kwang; Im, Yong-Taek; Jeon, Byung Cheol

Numerical study on the evolution of surface defects in wire drawing

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2012-04-01

PREAI

Baek, Hyun Moo; Jin, Young Gwan; Hwang, Sun Kwang; Im, Yong-Taek; Son, Il-Heon; Lee, Duk-Lak

Continuous ECAP process design for manufacturing a microstructure-refined bolt 用于制造微结构细化螺栓的连续ECAP工艺设计

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2011-12-01

PREAI

Jin, Young Gwan; Baek, Hyun Moo; Im, Yong-Taek; Jeon, Byung Cheol

研究方向