logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
K

Krzysztof Żak

opole University of Technology

20H指数
100论文数
1.3K被引数
收录论文 23
发表时间
logo
The Effect of Repeated Disassembly and Assembly on Fretting Wear in Press-In Connections under Rotational Bending重复拆卸和组装对旋转弯曲下压入连接件微动磨损的影响
errWear
IF6.1
err2026-09-30
err0
PREAI
errSławomir KOWALSKI; Andrzej KUREK; Krzysztof ŻAK; Maciej PYTEL; Dalibor BARTA
err分享
err收藏
Fatigue versus corrosion: mechanical durability of additively manufactured 18Ni300 after heat treatment and aging疲劳与腐蚀：热处理和时效后增材制造18Ni300的机械耐久性
errInternational Journal of Fatigue
IF6.8
err2026-08-08
err0
errOAAI
errMihiretu Ganta; Agnieszka Łagoda; Krzysztof Żak; Szymon Kołodziej; Jan Baran; Marta Kurek
err分享
err收藏
3D Measurement of Chronic Wounds in Routine Care: A Review with Practical Guidance for Smartphone Photogrammetry3D测量慢性伤口在常规护理中的应用：智能手机摄影测量的综述与实践指南
errAnnals of Biomedical Engineering
IF5.4
err2026-05-13
err0
errOAAI
errKevin Moj; Igor Arseniy; Krzysztof Żak; Dawid Malicki; Grzegorz Oszkinis
err分享
err收藏
Heteroscedasticity in fatigue life of additively manufactured maraging steel: Implications for design curve reliability增材制造马氏体时效钢疲劳寿命中的异方差性：对设计曲线可靠性的影响
errInternational Journal of Fatigue
IF6.8
err2025-12-03
err0
PREAI
errAleksander Karolczuk; Przemysław Strzelecki; Dariusz Skibicki; Andrzej Kurek; Aleksander Hebda; Krzysztof Żak; Łukasz Blacha
err分享
err收藏
Improved Microstructure Evolution and Corrosion Resistance in Friction-Welded Dissimilar AISI 1010/D3 Steel Joints Through Post-Weld Heat Treatment通过焊后热处理改善摩擦焊异种AISI 1010/D3钢接头微观结构演变和耐腐蚀性
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2025-04-08
err0
errOAAI
errNavasingh, Rajesh Jesudoss Hynes; Rajendran, T. Packiaraj; Nikolova, Maria P.; Priscilla, C. P. Goldin; Nieslony, Piotr; Zak, Krzysztof
err分享
err收藏
Key role of surface defects in the multiaxial fatigue life of additively manufactured unmachined 18Ni300 maraging steel
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-07-01
err2
errOAAI
errKarolczuk, Aleksander; Kurek, Andrzej; Prazmowski, Mariusz; Zak, Krzysztof; Skibicki, Dariusz; Pejkowski, Lukasz; Skubisz, Piotr; Witkowska, Malgorzata
err分享
err收藏
Heterogeneous effect of aging temperature on the fatigue life of additively manufactured thin-walled 18Ni300 maraging steel tubular specimen
errMATERIALS & DESIGN
IF7.9
err2024-01-01
err8
errOAAI
errKarolczuk, Aleksander; Kurek, Andrzej; Bohm, Michal; Derda, Szymon; Prazmowski, Mariusz; Kluger, Krzysztof; Zak, Krzysztof; Pejkowski, Lukasz; Seyda, Jan
err分享
err收藏
Topography measurement methods evaluation for entire bending-fatigued fracture surfaces of specimens obtained by explosive welding
errMEASUREMENT
IF5.6
err2024-01-01
err13
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Rozumek, Dariusz; Zak, Krzysztof; Branco, Ricardo
err分享
err收藏
A method of predicting the two-phase liquid-liquid flow resistance in a horizontal pipe with a layer of metal foam
errINTERNATIONAL JOURNAL OF MULTIPHASE FLOW
IF3.8
err2024-01-01
err1
errOAAI
errHapanowicz, Jerzy; Szydlowska, Adriana; Zak, Krzysztof
err分享
err收藏
Fatigue fracture surface of bronze RG7 under proportional cyclic torsion and bending
errMEASUREMENT
IF5.6
err2023-08-01
err4
errOAAI
errMalecka, Joanna; Zak, Krzysztof; Lagoda, Tadeusz
err分享
err收藏
Modelling the Kerf Angle, Roughness and Waviness of the Surface of Inconel 718 in an Abrasive Water Jet Cutting Process在磨料水射流切割过程中模拟Inconel 718表面的切口角，粗糙度和波纹度
errMATERIALS
IF3.2
err2023-07-27
err7
errOAAI
errPlodzien, Marcin; Zylka, Lukasz; Zak, Krzysztof; Wojciechowski, Szymon
err分享
err收藏
High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude42CrMo4钢的高性能端面铣削: 进入角对测得的表面粗糙度，切削力和振动幅度的影响
errMATERIALS
IF3.2
err2021-04-25
err19
errOAAI
errPlodzien, Marcin; Zylka, Lukasz; Sulkowicz, Pawel; Zak, Krzysztof; Wojciechowski, Szymon
err分享
err收藏
Technological and tribological aspects of milling-burnishing process of complex surfaces
errTRIBOLOGY INTERNATIONAL
IF6.9
err2021-03-01
err56
PREAI
errKalisz, J.; Zak, K.; Wojciechowski, S.; Gupta, M. K.; Krolczyk, G. M.
err分享
err收藏
Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2019-01-01
err6
PREAI
errGrzesik, Wit; Zak, Krzysztof; Chudy, Roman; Prazmowski, Mariusz; Malecka, Joanna
err分享
err收藏
Surface quality and topographic inspection of variable compliance part after precise turning
errAPPLIED SURFACE SCIENCE
IF6.9
err2018-03-01
err114
PREAI
errNieslony, P.; Krolczyk, G. M.; Wojciechowski, S.; Chudy, R.; Zak, K.; Marud, R. W.
err分享
err收藏
Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti-steel plates after drilling process
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2017-01-01
err70
PREAI
errNieslony, P.; Krolczyk, G. M.; Zak, K.; Maruda, R. W.; Legutko, S.
err分享
err收藏
Determination of friction in metal cutting with tool wear and flank face effects
errWEAR
IF6.1
err2014-09-01
err27
PREAI
errGrzesik, Wit; Rech, Joel; Zak, Krzysztof
err分享
err收藏
Producing high quality hardened parts using sequential hard turning and ball burnishing operations
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2013-10-01
err23
PREAI
errGrzesik, W.; Zak, K.
err分享
err收藏
A new mechanistic friction model for the oblique cutting with tool wear effect
errTRIBOLOGY INTERNATIONAL
IF6.9
err2013-10-01
err9
PREAI
errGrzesik, Wit; Kowalczyk, Damian; Zak, Krzysztof
err分享
err收藏
Friction quantification in the oblique cutting with CBN chamfered tools
errWEAR
IF6.1
err2013-07-01
err19
PREAI
errGrzesik, Wit; Zak, Krzysztof
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Munish Kumar Gupta
H 指数: 78 · 论文数: 510
G
Grzegorz Królczyk
H 指数: 72 · 论文数: 379
J
J. Rech
H 指数: 49 · 论文数: 262
S
Szymon Wojciechowski
H 指数: 48 · 论文数: 153
W
Wit Grzesik
H 指数: 39 · 论文数: 305
查看更多