Luís Marcelo Tavares - Publications, H-index & Citations

Luís Marcelo Tavares

Universidade Federal do Rio de Janeiro

43H指数

230论文数

7.2K被引数

收录论文 79

发表时间

Simulating blending of iron ore sinter feed in industrial stockpiles using a voxelization-based geometric model. Part II: Estimation and utilization of intra-batch variability 基于体素化几何模型模拟工业矿堆中铁矿烧结料混合。第二部分：批次内变异性的估计与利用

Minerals Engineering

IF5

2026-08-18

PREAI

Horacio A. Petit; Bruno P. da Silva; Luís Marcelo Tavares

Microstructural characterization, wear, and performance analysis of laboratory jaw crusher liners fabricated via arc-based directed energy deposition 实验室弧焊式定向能量沉积制备的颚式破碎机衬板微观结构表征、磨损及性能分析

Journal of Materials Research and Technology-JMR&T

IF6.6

2026-07-15

OAAI

Felipe de A. Costa; Gabriel K.Pantoja Barrios; Francisco Werley Cipriano Farias; Jairo José Muñoz Chávez; João da Cruz Payão Filho; Luís Marcelo Tavares

Opening the black box of loss on ignition of agricultural-based ashes as SCM: Carbon type characterization and its effect on cement hydration and rheology 农业基灰烬作为硅钙质材料时烧失量黑箱的开启：碳类型表征及其对水泥水化和流变性的影响

Cement and Concrete Research

IF13.1

2026-05-05

PREAI

Amanda Pereira Vieira; Luís Marcelo Tavares; Jordi Payá; Romildo Dias Toledo Filho

Variability of Crushability and Grindability of Iron Ores in an Itabirite Deposit 赤铁矿矿床中可碎性和可磨性的变化性

Minerals

IF2.2

2026-04-30

PREAI

Tavares, Luis Marcelo; Barrios, Gabriel K. P.; Alves, Luciana P.; de Castro, Elias F.; Silva, Jose N. S.

Simulating blending of iron ore sinter feed in industrial stockpiles using a voxelization-based geometric model. Part I: Model development considering inter-batch variability 基于体素化几何模型的工业堆场铁矿石烧结矿混匀模拟。第一部分：考虑批次间变异性的模型开发

Minerals Engineering

IF5

2026-04-07

PREAI

Horacio A. Petit; Bruno P. da Silva; Luís Marcelo Tavares

Use of high limestone filler content to improve NATURAL aggregate liberation and concrete waste recyclability 采用高石灰石粉含量以提高天然骨料解离度和混凝土废弃物的可回收性

Materials Today Communications

IF4.5

2026-04-04

OAAI

Tatiane Isabel Hentges; Pablo Augusto Krahl; Luis Marcelo Tavares; Sérgio Cirelli Angulo

Modeling and simulation of metal wear in Bonds impeller-tumbler ore abrasiveness test using the Archard model in DEM 利用离散元法（DEM）和Archard模型对Bonds搅拌磨机磨矿试验中的金属磨损进行建模与仿真

Minerals Engineering

IF5

2025-12-24

PREAI

Alan A.A. Tino; Gabriel K.P. Barrios; Luís Marcelo Tavares

Simulation of industrial jaw crushers in primary size reduction of iron ore using DEM 利用离散元法（DEM）对铁矿石初级破碎中的工业颚式破碎机进行模拟

Minerals Engineering

IF5

2025-12-24

PREAI

Victor A. Rodriguez; Luciana P. Alves; Gabriel K.P. Barrios; Luís Marcelo Tavares

Role of particle stiffness distribution on secondary breakage of single particles under slow compression 单颗粒在慢速压缩下二次破碎中颗粒刚度分布的作用

Minerals Engineering

IF5

2025-11-15

PREAI

Túlio M. Campos; Malcolm S. Powell; Luís Marcelo Tavares

Enhanced use of high-carbon content rice husk and sugarcane bagasse ashes in pastes and concrete through blends with a highly porous rice husk ash produced by controlled calcination 通过掺入由可控煅烧生产的高孔隙率稻壳灰，增强高碳含量稻壳和甘蔗渣灰在砂浆和混凝土中的使用

Construction and Building Materials

IF8

2025-11-04

PREAI

Amanda Pereira Vieira; Luís Marcelo Tavares; Jordi Payá; Romildo Dias Toledo Filho

Multicomponent simulation of an industrial closed–circuit ball mill in size reduction of an iron ore 工业闭路球磨机在铁矿石粒度减小中的多组分模拟

Minerals Engineering

IF5

2025-10-14

PREAI

Brena Karolyne N. Rocha; Túlio M. Campos; Luciana Pereira Alves; Luís Marcelo Tavares

Exploring the transition from single-particle to confined-particle-bed breakage by slow compression 探索从单颗粒破碎到受限颗粒床破碎的缓慢压缩过渡

POWDER TECHNOLOGY

IF4.6

2025-07-01

PREAI

Campos, Tulio M.; Powell, Malcolm; Tavares, Luis Marcelo

Modelling multicomponent breakage and liberation by detachment of an iron ore in batch ball milling 通过批次球磨机中矿石的解离与分离，对多组分破碎进行建模

Minerals Engineering

IF5

2025-06-30

PREAI

Brena Karolyne N. Rocha; Túlio M. Campos; Luís Marcelo Tavares

Validation of a rheology-dependent PBM-DEM-CFD simulation model of a continuous vertical stirred mill operating under different conditions 验证在不同条件下运行的连续立式搅拌磨的流变相关pbm-dem-cfd模拟模型

CHEMICAL ENGINEERING SCIENCE

IF4.3

2025-03-01

PREAI

Petit, Horacio A.; de Oliveira, Alessandro L. R.; Tavares, Luis Marcelo

Mechanical properties of reduced-sized limestone filler-cement pastes and their variability using an instrumented point load test

JOURNAL OF BUILDING ENGINEERING

IF7.4

2024-10-01

PREAI

de Oliveira, Fabio C.; Silva, Natalia, V; Hentges, Tatiane I.; Tavares, Luis M.; Angulo, Sergio C.

Modelling breakage of steelmaking materials for simulation of mechanical degradation during handling

MINERALS ENGINEERING

IF5

2024-10-01

PREAI

de Carvalho, Rodrigo M.; Tavares, Luis Marcelo

Review of Recent Advances in HPGR Designs 近期高压辊磨机设计进展综述

Mineral Processing and Extractive Metallurgy Review

IF4.6

2024-05-19

PREAI

Victor A. Rodriguez; Túlio M. Campos; Gabriel K.P. Barrios; Luís Marcelo Tavares

Insights into metal wear and particle breakage using Bond's abrasiveness test 使用Bond的磨蚀性测试洞察金属磨损和颗粒破裂

MINERALS ENGINEERING

IF5

2024-05-01

PREAI

Tino, Alan A. A.; Barrios, Gabriel K. P.; Tavares, Luis Marcelo

Critical Assessment of Novel Developments in HPGR Technology Using DEM

MATERIALS

IF3.2

2024-04-04

OAAI

Rodriguez, Victor A.; Barrios, Gabriel K. P.; Campos, Tulio M.; Tavares, Luis Marcelo

Energy-based modelling of single-particle breakage by slow compression 基于能量的慢速压缩单颗粒破碎模型

MINERALS ENGINEERING

IF5

2024-03-01

PREAI

Campos, Tulio M.; Andersson, Caroline; Evertsson, Magnus; Powell, Malcolm; Tavares, Luis Marcelo

研究方向