logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
P

Paweł Sikora

west pomeranian university of technology in szczecin

36H指数
209论文数
3.6K被引数
收录论文 59
发表时间
logo
Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
errMaterials
IF3.2
err2026-01-20
err0
errOAAI
errKarol Federowicz; Daniel Sibera; Nikola Tošić; Adam Zieliński; Pawel Sikora
err分享
err收藏
Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates (fCAs) and Recycled Concrete Powder (RCP): Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance3D打印含细再生混凝土骨料(fCAs)和再生混凝土粉末(RCP)的混凝土：流变学、早期龄期、收缩、力学及耐久性性能研究
errBuildings 2025, Vol. 15, Page 4255
IF3.1
err2025-11-27
err0
errOAAI
errPawel Sikora; Karol Federowicz; Szymon Skibicki; Mateusz Techman; Marcin Hoffmann; Joao Nuno Pacheco; Mehdi Chougan; Daniel Grochała; Krzysztof Cendrowski; Daniel Sibera; Jarosław Błyszko; Bartosz Budziński; Guan Lin; Aleksandra Ludwiczak-Sarzała
err分享
err收藏
Elevated temperature response and fire resistance considerations of 3D-printed concrete: small- to medium-scale wall experiments高温响应和耐火性能考虑：3D打印混凝土的小尺度至中尺度墙体试验
errArchives of Civil and Mechanical Engineering
IF4.4
err2025-09-08
err0
errOAAI
errPawel Sikora; Szymon Skibicki; Jakub Bielawski; Mateusz Techman; Karol Federowicz; Wojciech Węgrzyński
err分享
err收藏
Physico-mechanical properties, microstructure, and durability of ultra-high-performance lightweight concrete (UHPLWC) incorporating expanded thermoplastic microspheres and basalt fibers物理力学性能、微观结构和耐久性，以及掺入热塑性微球的超高性能轻质混凝土（UHPLWC）和玄武岩纤维
errConstruction and Building Materials
IF8
err2025-08-29
err0
PREAI
errHussein Al-kroom; Mohamed Abd Elrahman; Dietmar Stephan; Jarosław Strzałkowski; Agata Stolarska; Sang-Yeop Chung; Pawel Sikora
err分享
err收藏
3D printed concrete reinforced with flexible fiber reinforced polymer strips or grids: Concept and bond tests3D打印混凝土，采用柔性纤维增强聚合物条带或网格进行加固：概念与粘结试验
errStructures
IF4.3
err2025-07-15
err0
PREAI
errTao Ding; Haining Dong; Paweł Sikora; Guan Lin
err分享
err收藏
Deep learning-based image analysis for confirming segregation in fresh self-consolidating concrete基于深度学习的图像分析，用于确认新鲜自密实混凝土中的离析
errAPPLIED RHEOLOGY
IF1.8
err2025-04-17
err0
errOAAI
errAkbotina, Azhar; Chung, Sang-Yeop; Sikora, Pawel
err分享
err收藏
Seawater-mixed concretes containing supplementary cementitious materials: compressive strength, e-modulus, electrical resistivity, and life cycle assessment
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2025-01-27
err0
errOAAI
errRathnarajan, Sundar; Pacheco, Joao Nuno; Capucha, Francisco; Valencia, Javier; Techman, Mateusz; Sikora, Pawel
err分享
err收藏
Development and microstructural characterization of ultra-lightweight aggregate concrete incorporating different sizes of polypropylene fibers
errINTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS
IF3.6
err2024-12-09
err0
errOAAI
errChung, Sang-Yeop; Oh, Seo-Eun; Sikora, Pawel; Stephan, Dietmar; Abd Elrahman, Mohamed; Al-kroom, Hussein
err分享
err收藏
Comparative analysis of ternary blended cement with clay and engineering brick aggregate for high-performance 3D printing
errDEVELOPMENTS IN THE BUILT ENVIRONMENT
IF8.2
err2024-12-01
err0
errOAAI
errChougan, Mehdi; Skibicki, Szymon; Al-Noaimat, Yazeed A.; Federowicz, Karol; Hoffmann, Marcin; Sibera, Daniel; Cendrowski, Krzysztof; Techman, Mateusz; Pacheco, Joao Nuno; Ghaffar, Seyed Hamidreza; Sikora, Pawel
err分享
err收藏
Advances in using seawater in slag-containing cement systems
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-11-01
err1
errOAAI
errKryvenko, Pavlo; Sikora, Pawel; Rudenko, Igor; Konstantynovskyi, Oleksandr
err分享
err收藏
Performance of normal-weight and lightweight 3D printed cementitious composites with recycled glass: Sorption and microstructural perspective
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-11-01
err0
PREAI
errCuevas, Karla; Chung, Sang-Yeop; Sikora, Pawel; Stephan, Dietmar
err分享
err收藏
Alkali-activated cements as sustainable materials for repairing building construction: A review
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-08-01
err6
PREAI
errKryvenko, Pavlo; Rudenko, Igor; Sikora, Pawel; Sanytsky, Myroslav; Konstantynovskyi, Oleksandr; Kropyvnytska, Tetiana
err分享
err收藏
The effect of interlayer adhesion on stress distribution in 3D printed beam elements
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-06-01
err6
errOAAI
errSkibicki, Szymon; Szewczyk, Piotr; Majewska, Julia; Sibera, Daniel; Ekiert, Ewa; Chung, Sang-Yeop; Sikora, Pawel
err分享
err收藏
Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy towards Decreasing Cement Content in 3DPC重复使用3D打印混凝土 (3DPC) 细再生骨料作为降低3DPC中水泥含量的策略的潜力
errMATERIALS
IF3.2
err2024-05-27
err12
errOAAI
errSkibicki, Szymon; Federowicz, Karol; Hoffmann, Marcin; Chougan, Mehdi; Sibera, Daniel; Cendrowski, Krzysztof; Techman, Mateusz; Pacheco, Joao Nuno; Liard, Maxime; Sikora, Pawel
err分享
err收藏
Comprehensive evaluation of early-age hydration and compressive strength development in seawater-mixed binary and ternary cementitious systems
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2024-04-15
err3
errOAAI
errRathnarajan, Sundar; Cendrowski, Krzysztof; Sibera, Daniel; Sikora, Pawel
err分享
err收藏
Functional Bi2O3/Gd2O3 Silica-Coated Structures for Improvement of Early Age and Radiation Shielding Performance of Cement Pastes
errNANOMATERIALS
IF4.3
err2024-01-12
err2
errOAAI
errCendrowski, Krzysztof; Federowicz, Karol; Techman, Mateusz; Chougan, Mehdi; El-Khayatt, Ahmed M.; Saudi, H. A.; Kedzierski, Tomasz; Mijowska, Ewa; Strzalkowski, Jaroslaw; Sibera, Daniel; Abd Elrahman, Mohamed; Sikora, Pawel
err分享
err收藏
Understanding the role of andesite igneous rock in enhancing the performance of alkali-activated ultrafine slag exposed to normal and elevated temperatures
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2023-12-01
err4
PREAI
errAbdel-Gawwad, Hamdy A.; Abbass, Ahmed Mohamed; Al-kroom, Hussein; Sikora, Pawel; El-Khayatt, Ahmed M.; Abd Elrahman, Mohamed; Stephan, Dietmar
err分享
err收藏
Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties
errDEVELOPMENTS IN THE BUILT ENVIRONMENT
IF8.2
err2023-12-01
err11
errOAAI
errAl-Noaimat, Yazeed A.; Chougan, Mehdi; Albar, Abdulrahman; Skibicki, Szymon; Federowicz, Karol; Hoffman, Marcin; Sibera, Daniel; Cendrowski, Krzysztof; Techman, Mateusz; Pacheco, Joao Nuno; Chung, Sang-Yeop; Sikora, Pawel; Al-Kheetan, Mazen; Ghaffar, Seyed Hamidreza
err分享
err收藏
Seawater-mixed concretes containing natural and sea sand aggregates - A review
errRESULTS IN ENGINEERING
IF7.9
err2023-12-01
err16
errOAAI
errRathnarajan, Sundar; Sikora, Pawel
err分享
err收藏
Development of 3D printed heavyweight concrete (3DPHWC) containing magnetite aggregate
errMATERIALS & DESIGN
IF7.9
err2023-09-01
err6
errOAAI
errFederowicz, Karol; Techman, Mateusz; Skibicki, Szymon; Chougan, Mehdi; El-Khayatt, Ahmed M.; Saudi, H. A.; Blyszko, Jaroslaw; Abd Elrahman, Mohamed; Chung, Sang-Yeop; Sikora, Pawel
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
E
Ewa Mijowska
H 指数: 59 · 论文数: 534
D
Dietmar Stephan
H 指数: 54 · 论文数: 298
U
Ulrich Szewzyk
H 指数: 50 · 论文数: 138
B
Behzad Nematollahi
H 指数: 46 · 论文数: 125
M
Mohamed Abd Elrahman
H 指数: 41 · 论文数: 124
查看更多