Kimiyoshi Naito

research center for structural materials

35H指数

229论文数

4.2K被引数

收录论文 68

发表时间

Submicron-sized SiC particulate-reinforced LaMgAl₁₁O₁₉ matrix composites: Preparation and mechanical properties 亚微米级SiC颗粒增强LaMgAl₁₁O₁₉基复合材料的制备与力学性能

Journal of the European Ceramic Society

IF6.2

2026-10-06

PREAI

Shuqi Guo; Gaku Okuma; Kimiyoshi Naito; Hideki Kakisawa

Anisotropic elastic properties in glass, aramid, and carbon fibers

Journal of Materials Research and Technology

IF6.6

2026-01-30

OAAI

Kimiyoshi Naito; Chiemi Nagai; Keiichi Shirasu

Mode-I and mode-II interlaminar fracture properties of high strength polyacrylonitrile-based carbon fiber reinforced disulfide-based epoxy-covalent adaptable network polymer composite 高强度聚丙烯腈基碳纤维增强二硫化物基环氧共价适应性网络聚合物复合材料的I型和II型层间断裂性能

Materials Today Communications

IF4.5

2026-01-29

OAAI

Kimiyoshi Naito; Yasuyuki Nakamura; Shota Ando; Jun Koyanagi; Keiichi Shirasu; Makoto Watanabe; Takaya Suzuki; Hiroaki Kuwahara

In situ zirconia-lanthanum magnesium aluminate composites: Preparation and mechanical behaviours 原位氧化锆-镧镁铝尖晶石复合材料：制备与力学行为

Ceramics International

IF5.6

2025-12-27

PREAI

Shuqi Guo; Gaku Okuma; Kimiyoshi Naito; Hideki Kakisawa

Raman Scattering for Anisotropy of Polyacrylonitrile-Based and Pitch-Based Carbon Fibers 聚丙烯腈基和沥青基碳纤维各向异性的拉曼散射

Fibers 2025, Vol. 13, Page 114

IF3.9

2025-08-25

PREAI

Kimiyoshi Naito; Chiemi Nagai

Rapid thermal degradation of polyamide 6 microdroplets and its effect on interfacial shear strength to simulate thermal welding conditions of CFRTP 聚酰胺6微液滴的快速热降解及其对界面剪切强度的影响，以模拟CFRTP的热焊接条件

Composites Science and Technology

IF9.8

2025-08-05

PREAI

Shota Kawasaki; Kimiyoshi Naito; Jonathon Tanks

Enhancing the thermo-oxidative stability of polyamide 6 by scalable melt-blending with PEG-grafted glycol lignin 通过可扩展熔融共混聚乙二醇接枝乙二醇木素来增强尼龙6的热氧化稳定性

Polymer

IF4.5

2025-07-24

PREAI

Jonathon Tanks; Tatsuya Akagawa; Kenji Tamura; Yoshihiro Nemoto; Kimiyoshi Naito; Yujiro Watanabe; Thi Thi Nge; Tatsuhiko Yamada

Enhancement of ductility in low temperature regimes via detwinning in Mg alloys 通过退孪生在低温区域提高Mg合金的延展性

SCRIPTA MATERIALIA

IF5.6

2025-07-01

PREAI

Somekawa, Hidetoshi; Ono, Yoshinori; Naito, Kimiyoshi; Singh, Alok

Defining the degree of degradation in plastics: Quantification of accumulated degradation products and leached stabilizers for predicting end-of-life

POLYMER DEGRADATION AND STABILITY

IF7.4

2025-02-01

OAAI

Hibi, Yusuke; Matsumoto, Tsukasa; Midorikawa, Masatoshi; Uesaka, Shiho; Mizoshiri, Makoto; Tanimura, Toshiyuki; Okada, Masato; Naito, Kimiyoshi; Naito, Masanobu

Microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics 反应热压LaMgAl11O19陶瓷的微观结构和力学性能

CERAMICS INTERNATIONAL

IF5.6

2025-01-01

PREAI

Guo, Shuqi; Okuma, Gaku; Naito, Kimiyoshi; Kakisawa, Hideki

Mechanical behaviours of reactive hot-pressed B 4 C-based composites with ZrB2-ZrC

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2024-12-01

PREAI

Guo, Shuqi; Okuma, Gaku; Naito, Kimiyoshi; Kakisawa, Hideki

Raman Scattering for Tensile Testing of Polyacrylonitrile-Based and Pitch-Based Single Carbon Fibers

FIBERS

IF3.9

2024-10-10

OAAI

Naito, Kimiyoshi; Nagai, Chiemi

Control of twin boundary mobility by solute segregation in Mg binary alloys Mg二元合金中溶质偏析对孪晶界迁移率的控制

SCRIPTA MATERIALIA

IF5.6

2024-08-01

PREAI

Somekawa, Hidetoshi; Tsuru, Tomohito; Naito, Kimiyoshi; Singh, Alok

Effects of mean stress on the fatigue properties of core-in-sheath-type carbon/glass hybrid thermoplastic composite rods: Experimental investigation and practical predictive method

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-05-25

PREAI

Oguma, Hiroyuki; Naito, Kimiyoshi

Mechanical behaviours of hot-pressed rare-earth oxide (RE = Y and La)-doped TaB2-SiC composites 热压稀土氧化物 (RE = Y和La) 掺杂TaB2-SiC复合材料的力学行为

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2024-03-01

PREAI

Guo, Shuqi; Okuma, Gaku; Naito, Kimiyoshi; Kakisawa, Hideki

Infrared-thermography measurement of temperature distribution in carbon fiber-reinforced polypropylene during ultrasonic welding

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-02-01

PREAI

Kawasaki, Shota; Naito, Kimiyoshi; Ishida, Osuke; Shirai, Takehiro; Uzawa, Kiyoshi

Durable and recyclable biomimetic glycol lignin/polyolefin compounds for a circular economy

JOURNAL OF MATERIALS CHEMISTRY A

IF9.5

2024-01-01

PREAI

Tanks, Jonathon; Tamura, Kenji; Naito, Kimiyoshi; Nge, Thi Thi; Yamada, Tatsuhiko

Mechanical behaviors of hot-pressed 4TaC-1ZrC ceramics with and without Y2O3 and La2O3 additives

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2023-12-01

PREAI

Guo, Shuqi; Okuma, Gaku; Naito, Kimiyoshi; Kakisawa, Hideki

Mechanical properties of hot-pressed VB2-SiC composites with and without WC

CERAMICS INTERNATIONAL

IF5.6

2023-11-01

PREAI

Guo, Shuqi; Okuma, Gaku; Naito, Kimiyoshi; Kakisawa, Hideki

Chemical Structure Evaluations of Amine Hardeners to Ensure and Predict the Performance of Wet Adhesion of Epoxies

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN

IF3.8

2023-10-18

OAAI

Nakamura, Yasuyuki; Hibi, Yusuke; Naito, Kimiyoshi; Yamamoto, Norie; Hanamura, Misato; Hanamura, M. isato

研究方向