科言猫
学术研究的AI总结
首页
文献互助
订阅
我的收藏
科研工具
选题分析
论文总结
专利管理
未登录
返回
J
Jin‐Woo Lee
University of Ulsan
38
H指数
355
论文数
5.4K
被引数
0
相关解读
订阅
收录论文
87
发表时间
发表时间
IF
被引数
Giant Small-Molecule Donors With Controlled Backbone Planarity Afford High-Performance and Photostable Organic Solar Cells
具有可控骨架平面性的巨型小分子给体可实现高性能和光稳定的有机太阳能电池
Advanced Science
IF
14.1
2025-11-19
0
OA
AI
Hyerin Jeon; Seunghoon Song; Jin-Woo Lee; Yun-Hi Kim; Bumjoon J. Kim
分享
收藏
Forming limit diagram of an ultra-thin commercially pure titanium sheet: Combined experimental–numerical approach
超薄商用纯钛板材的成形极限图:实验-数值结合方法
Journal of Materials Research and Technology
IF
6.6
2025-10-31
0
OA
AI
Kyung Mun Min; Chanyang Kim; Seonghwan Choi; Jong-Hwa Hong; Jinwoo Lee; Hyuk Jong Bong
分享
收藏
Integrated experimental and numerical investigation of fracture onset in automotive components using finite element analysis
采用有限元分析对汽车零部件断裂起点的综合实验与数值研究
Materials & Design
IF
7.9
2025-10-10
0
OA
AI
Seojun Hong; Jinwoo Lee; Joonseok Kyeong; Jung Yun Won; Woo Jeong Oh; Myoung-Gyu Lee
分享
收藏
Crystal plasticity model for predicting ductile fracture in cast Al alloy
预测铸态铝合金延性断裂的晶体塑性模型
International Journal of Mechanical Sciences
IF
9.4
2025-08-05
0
PRE
AI
Hyuk Jong Bong; Woojin Jeong; Kyung Mun Min; Chanyang Kim; Jinwoo Lee; Myoung-Gyu Lee
分享
收藏
Bulge bottoming process for reducing springback in U-bending of 980 MPa high-strength steel
通过鼓胀底部工艺减少980 MPa高强度钢U型弯曲中的回弹
INTERNATIONAL JOURNAL OF MATERIAL FORMING
IF
2.6
2025-03-12
0
PRE
AI
Choi, Jisik; Lee, Jinwoo; Bong, Hyuk Jong; Lee, Myoung-Gyu; Ha, Jinjin; Barlat, Frederic
分享
收藏
Direct application of elasto-visco-plastic self-consistent crystal plasticity model to U-draw bending and springback of dual-phase high strength steel
INTERNATIONAL JOURNAL OF PLASTICITY
IF
12.8
2024-10-01
1
PRE
AI
Jeon, Bohye; Lee, Shin-Yeong; Lee, Jinwoo; Jeong, Youngung
分享
收藏
Effect of aspect ratio and axial tensile load on the inflation of cylindrical tubes
EXTREME MECHANICS LETTERS
IF
4.5
2024-09-01
0
PRE
AI
Lee, Jinwoo; Lee, Byungho; Lee, Anna
分享
收藏
Elevated symmetric supercapacitor performance and simulated solar light-functioning H2O2 production using single-step fabricated 2D/2D NiAl-based LDH/CoNi-based MOF nanohybrid
SURFACES AND INTERFACES
IF
6.3
2024-08-01
3
PRE
AI
Husain, Ahmad; Lee, Dong-Eun; Danish, Mohtaram; Ansari, M. N. M.; Shin, Seung-Ho; Lee, Joon-Yeob; Lee, Jin-Woo; Jo, Wan-Kuen
分享
收藏
Correlating mechanical properties of Al/Al bimetal composite and its constituents using combined experiment and microstructure-based multiscale modeling approach
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF
6.6
2024-07-01
0
OA
AI
Bong, Hyuk Jong; Sung, Jin Young; Lee, Jinwoo; Kim, Min Ho; Lee, Kwang Seok
分享
收藏
An enhanced boundary lubrication friction model for sheet metal forming
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF
9.4
2023-12-01
13
PRE
AI
Lee, Kijung; Park, Jinheung; Lee, Jinwoo; Kwon, Soon Woo; Choi, Insuk; Lee, Myoung-Gyu
分享
收藏
Investigation on a novel in-line incremental die forming process for sheet metals
THIN-WALLED STRUCTURES
IF
6.6
2023-12-01
5
PRE
AI
Lee, Jinwoo; Bong, Hyuk Jong; Kim, Chanyang; Kim, Daeyong; Lee, Myoung-Gyu
分享
收藏
Inter-void shearing effect on damage evolution under plane strain deformation in high-strength aluminum alloy sheet
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF
6.6
2023-09-01
3
OA
AI
Lee, Jinwoo; Bong, Hyuk Jong; Ha, Jinjin; Kim, Daeyong
分享
收藏
Modeling the multiaxial fracture behavior of Ti-6Al-4V alloy sheets at a high temperature using improved damage modeling
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF
6.6
2023-07-01
4
OA
AI
Lee, Jinwoo; Bong, Hyuk Jong; Kim, Daeyong; Ha, Jinjin
分享
收藏
Hole Expansion Characteristics of W-Tempered 7075 Aluminum Alloy Sheet in Comparison with Peak Aged T6 Tempered Alloy Sheet (vol 29, pg 157, 2023)
METALS AND MATERIALS INTERNATIONAL
IF
4
2023-03-18
1
OA
AI
Choi, Yumi; Lee, Jinwoo; Bong, Hyuk Jong; Lee, Myoung-Gyu
分享
收藏
Unveiling the self-annealing phenomenon and texture evolution in room-temperature-rolled Cu-Fe-P alloy sheets
INTERNATIONAL JOURNAL OF PLASTICITY
IF
12.8
2022-12-01
33
PRE
AI
Gupta, Aman; Kaushik, Lalit; Yoo, Tae-Hyeon; Lee, Jin Woo; Kim, Young-Kil; Lee, Dongwon; Heo, Yoon-Uk; Choi, Shi-Hoon
分享
收藏
Mechanical behavior and interfacial damage of carbon steel-stainless steel corrosion resisted-alloy (CRA) cladded plate: Hybrid analysis based on experiment and finite element modeling
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF
7
2022-09-01
17
PRE
AI
Moon, Chanmi; Won, Jung Yun; Lee, Kijung; Lee, Jinwoo; Kim, Sung-Woong; Lee, Myoung-Gyu
分享
收藏
Unveiling the room-temperature softening phenomenon and texture evolution in room-temperature- and cryogenic-rolled ETP copper
INTERNATIONAL JOURNAL OF PLASTICITY
IF
12.8
2022-09-01
19
PRE
AI
Gupta, Aman; Yoo, Tae-Hyeon; Kaushik, Lalit; Lee, Jin Woo; Kim, Young-Kil; Choi, Shi-Hoon
分享
收藏
A detailed design for a radioactive waste safety management system using ICT technologies
使用ICT技术的放射性废物安全管理系统的详细设计
PROGRESS IN NUCLEAR ENERGY
IF
3.2
2022-07-01
11
OA
AI
Park, Hee-Seoung; Jang, Sung-Chan; Kang, Il -Sik; Lee, Dong -Ju; Kim, Jeong-Guk; Lee, Jin-Woo
分享
收藏
Hole Expansion Characteristics of W-Tempered 7075 Aluminum Alloy Sheet in Comparison with Peak Aged T6 Tempered Alloy Sheet
METALS AND MATERIALS INTERNATIONAL
IF
4
2022-06-07
20
PRE
AI
Choi, Yumi; Lee, Jinwoo; Bong, Hyuk Jong; Lee, Myoung-Gyu
分享
收藏
Modeling crystal plasticity with an enhanced twinning-detwinning model to simulate cyclic behavior of AZ31B magnesium alloy at various temperatures
INTERNATIONAL JOURNAL OF PLASTICITY
IF
12.8
2022-03-01
33
PRE
AI
Bong, Hyuk Jong; Lee, Jinwoo; Lee, Myoung-Gyu
分享
收藏
研究方向
暂时未获取到该数据
合作学者
合作期刊
D
David L. Kaplan
H 指数: 194 · 论文数: 2.4K
H
Ho Won Jang
H 指数: 102 · 论文数: 857
Hyoung Seop Kim
(Hyoung Seop Kim)
H 指数: 99 · 论文数: 1.8K
J
Jong‐Heun Lee
H 指数: 99 · 论文数: 586
J
Jae Sung Lee
H 指数: 93 · 论文数: 418
查看更多