Tien-Li Chang - Publications, H-index & Citations

Tien-Li Chang

national taiwan normal university

23H指数

127论文数

1.5K被引数

收录论文 41

发表时间

Controlling wettability of femtosecond laser-structured titanium implant surfaces for biological cultivation 飞秒激光结构化钛种植体表面的浸润性控制用于生物培养

International Journal of Advanced Manufacturing Technology

IF3.1

2026-09-21

OAAI

Yuan-Jun Chen; Tien-Li Chang; Pin-Jui Su; Shen-Yu Liu; Qi-Xuan Wu; Chien-Ping Wang

Oxygen plasma modification of femtosecond laser-reduced MoS₂/GO heterostructures for flexible humidity sensors 飞秒激光还原的MoS₂/GO异质结构的氧等离子体改性用于柔性湿度传感器

Journal of Alloys and Compounds

IF6.3

2026-08-27

PREAI

Tong-Yao Han; Yuan-Jun Chen; Shana Smith; Qi-Xuan Wu; Tien-Li Chang

Antibacterial chitosan/ZnO composite coatings with femtosecond laser-induced micropatterned surfaces 抗菌壳聚糖/ZnO复合涂层，具有飞秒激光诱导的微图案表面

Progress in Organic Coatings

IF7.3

2026-08-22

PREAI

Pin-Shiuan Chiu; Tien-Li Chang; Qi-Xuan Wu; Cheng-Che Liu; Yuan-Jun Chen; Tzu-Wei Huang; Ching-Hao Li

Improving the efficiency of a bioaerosol disinfection reactor by using ultraviolet C light-emitting diodes and titanium dioxide photocatalyst 利用紫外C光发射二极管和二氧化钛光催化剂提高生物气溶胶消毒反应器的效率

Journal of Photochemistry and Photobiology B-Biology

IF3.7

2026-07-17

PREAI

Chien-Ping Wang; Bo Yu Liao; Fan-Chun Hsieh; Qiang Jia; Tien-Li Chang

Simultaneous reduction and electrode patterning of TiO2/GO films via femtosecond laser for UV-enhanced flexible CO gas sensors 飞秒激光诱导TiO2/GO薄膜的同时还原与电极图案化以制备紫外增强柔性CO气体传感器

Applied Surface Science

IF6.9

2026-04-15

PREAI

Yuan-Jun Chen; Tien-Li Chang; Shih-Feng Tseng; Wen-Tse Hsiao; Shu-Han Hsu

Gradient structures on copper surfaces applied to boiling heat transfer surfaces 铜表面应用于沸腾传热表面的梯度结构

International Communications in Heat and Mass Transfer

IF6.4

2026-04-10

PREAI

Shih-Hao Chou; Fa-Ta Tsai; Chin-Chi Hsu; Tzu-Chi Lin; Tien-Li Chang

Structure and inconel 718 cutting of (TiW)N films prepared by reactive sputtering 结构和通过反应溅射制备的(TiW)N薄膜的Inconel 718切割

The International Journal of Advanced Manufacturing Technology

IF0

2026-03-03

PREAI

Yu-Kai Shen; Tien-Li Chang; Shu-Ping Wu; Ya-Ge Huang; Chun-Yao Hsu

Flexible TiO2/GO Hybrid Films with Laser-Induced Necking-Enhanced Micro/Nano Hierarchical Structures for Non-invasive Wearable Sweat Lactate Sensing

Ceramics International

IF5.6

2026-01-21

PREAI

Zhao-Chi Chen; Tien-Li Chang; Shih-Feng Tseng; Minh-Quang Tran

Influence of Span Angle Variations on Fluid Flow Characteristics in Gerotor Screw Vacuum Pumps 转子螺杆真空泵中跨角变化对流体流动特性的影响

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME

IF2.4

2025-12-01

PREAI

Hsieh, Chiu-Fan; Chang, Tien-Li; Yang, Yu-Teng

Femtosecond laser-fabricated microfluidic PCR device with graphene microheaters for DNA amplification 飞秒激光制备的带有石墨烯微加热器的微流控PCR装置，用于DNA扩增

sensors and actuators b chemical

IF0

2025-09-11

PREAI

Yuan-Jun Chen; Tien-Li Chang; Shen-Yu Liu; Cheng-Che Liu; Wen-Tse Hsiao; Qi-Xuan Wu

Identification of mixed micro-and nanoparticle suspensions using an opto-microfluidic lab-on-a-chip system with Monte Carlo-based light extinction spectrometry 使用基于蒙特卡洛光消光谱法的光学生物芯片系统识别混合的微米和纳米颗粒悬浮液

SENSORS AND ACTUATORS A-PHYSICAL

IF4.9

2025-05-14

PREAI

Dinh, Quoc-Thinh; Chien, Shuo-Chih; Chuang, Hsin-Yu; Chen, Wei-Yu; Cheng, Chia-Hsiung; Chang, Tien-Li; Chen, Yu-Bin

Investigations of thermoelectric properties in polymer-based hybrid nanofluids with various surfactants

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

IF4.9

2025-04-01

PREAI

Wang, Rong-Tsu; Yang, Chia-An; Chen, Sih-Li; Chang, Tien-Li; Wang, Jung-Chang

Analysis and optimization of injection molding process on warpage based on Taguchi design and PSO algorithm 基于田口设计和粒子群优化算法的注塑成型工艺翘曲分析与优化

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

IF3.1

2025-02-19

OAAI

Zhang, Lei; Chang, Tien-Li; Tsao, Chung-Chen; Hsieh, Kun-Chi; Hsu, Chun-Yao

Fabrication and simulation of optical shaping diffuser to control light patterns 光学塑形扩散器的制备与仿真：用于控制光斑图案

MICRO AND NANOSTRUCTURES

IF3

2025-02-01

PREAI

Chiu, Po-Wei; Chang, Tien-Li; Chen, Wei-Chun; Lee, Yeeu-Chang

Effect of focal spot size on AlSi10Mg alloy parts fabricated by laser powder bed fusion: Process window, mechanical properties, and microstructure 焦斑尺寸对激光粉末床熔合AlSi10Mg合金零件的影响: 工艺窗口，力学性能和微观结构

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-03-01

PREAI

Hung, Chia-Hung; Chu, Chia-Wei; Chang, Tien-Li; Lin, Ting-Chiang; Chen, Yu-Pin

Surface modification of bio-orderly CrTiN thin films with periodic corrugated nanopod structures by picosecond laser ablation 皮秒激光烧蚀具有周期性波纹纳米结构的生物有序CrTiN薄膜的表面改性

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-03-01

PREAI

Chen, Zhao-Chi; Chang, Tien-Li; Wu, Qi-Xuan; Liu, Cheng-Che; Chen, Hung-Chih; Huang, Chih-Heng

Ring droplet formation during evaporation of a sessile water droplet on a biphilic surface

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2022-01-01

PREAI

Cheng, Hui-Chung; Li, Cheng-Han; Chang, Tien-Li; Chen, Ping-Hei

Ultrafast laser direct writing of screen-printed graphene-based strain electrodes for sensing glass deformation

CERAMICS INTERNATIONAL

IF5.6

2021-10-01

PREAI

Tseng, Shih-Feng; Liao, Chia-Ho; Hsiao, Wen-Tse; Chang, Tien-Li

Application of self-heating graphene reinforced polyvinyl alcohol nanowires to high-sensitivity humidity detection

SENSORS AND ACTUATORS B-CHEMICAL

IF7.7

2021-01-01

PREAI

Chen, Zhao-Chi; Chang, Tien-Li; Su, Kai-Wen; Lee, Hsin-Sheng; Wang, Jung-Chang

Effect of biomimetic fishbone-patterned copper tubes on pool boiling heat transfer

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2020-12-01

PREAI

Cheng, Hui-Chung; Chen, Yu-Ying; Chang, Tien-Li; Chen, Ping-Hei

研究方向