Abdollah Bahador - Publications, H-index & Citations

Abdollah Bahador

Iskenderun Technical University

20H指数

64论文数

1.1K被引数

收录论文 29

发表时间

Microstructure control to enhance low temperature and cryogenic wear behavior of Inconel 718 produced by laser powder bed fusion 通过激光粉末床熔融制备的Inconel 718的微观结构控制以增强其低温和深冷磨损行为

Journal of Manufacturing Processes

IF6.8

2026-07-01

PREAI

Kucuk, Yilmaz; Gokcekaya, Ozkan; Gunen, Ali; Gok, Mustafa Sabri; Bahador, Abdollah; Nakano, Takayoshi; Cam, Gurel

Microstructural Formation Mechanism of α plus β Dual Phase Ti-Fe Sintered Alloys via Hot Rolling Process 通过热轧工艺制备的α+β双相Ti-Fe烧结合金微观结构形成机制

Materials Transactions

IF1.9

2026-01-01

PREAI

Kariya, Shota; Tanaka, Takayuki; Umeda, Junko; Yang, Yafeng; Li, Shaofu; Khantachawana, Anak; Bahador, Abdollah; Kondoh, Katsuyoshi

Strength enhancement of α + β dual phase Ti-4Fe alloys with rhenium addition at room and high temperatures α + β双相Ti-4Fe合金在室温和高温下添加铼后的强度增强

Materials & Design

IF7.9

2025-06-19

OAAI

Takuma Teramae; Ammarueda Issariyapat; Abdollah Bahador; Junko Umeda; Katsuyoshi Kondoh

Microstructure development and strengthening behaviour in hot-extruded Ti-Mo alloys with exceptional strength-ductility balance

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-01

OAAI

Huang, Jeff; Bahador, Abdollah; Kondoh, Katsuyoshi

Novel tensile deformation mode in laser powder bed fusion prepared Ti-O alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-02-01

PREAI

Kariya, Shota; Issariyapat, Ammarueda; Bahador, Abdollah; Umeda, Junko; Shen, Jianghua; Yamanaka, Kenta; Chiba, Akihiko; Kondoh, Katsuyoshi

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites CNT诱导的CNTs/Al复合材料中的异质基体晶粒结构

CARBON

IF11.6

2024-01-01

OAAI

Wan, Jie; Chen, Biao; Zhou, Xinyi; Cao, Lin; Geng, Huarui; Shen, Jianghua; Bahador, Abdollah; Kondoh, Katsuyoshi; Li, Jinshan

Excellent tensile yield strength with ultrafine grain and tailored microstructure in plastically deformed Ti-Re alloys

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-12-01

PREAI

Bahador, Abdollah; Amrin, Astuty; Kariya, Shota; Issariyapat, Ammarueda; Gokcekaya, Ozkan; Zhao, Guohua; Umeda, Junko; Yang, Yafeng; Qian, Ma; Kondoh, Katsuyoshi

Loss- free tensile ductility of dual- structure titanium composites via an interdiffusion and self- organization strategy 通过互扩散和自组织策略实现双结构钛复合材料的无损失拉伸延展性

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

IF9.1

2023-07-03

OAAI

Liu, Lei; Li, Shufeng; Pan, Deng; Hui, Dongxu; Zhang, Xin; Li, Bo; Liang, Tianshou; Shi, Pengpeng; Bahador, Abdollah; Umeda, Junko; Kondoh, Katsuyoshi; Li, Shaolong; Gao, Lina; Wang, Zhimao; Li, Gang; Zhang, Shuyan; Wang, Ruihong; Chen, Wenge

Effect of grain size on the tensile ductility and fracture mechanism of Ti-O alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-05-01

PREAI

Kariya, Shota; Issariyapat, Ammarueda; Bahador, Abdollah; Umeda, Junko; Shen, Jianghua; Kondoh, Katsuyoshi

Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: An in-situ study 通过氧化钛分解精确控制超高强度cp-ti中的氧含量: 原位研究

MATERIALS & DESIGN

IF7.9

2023-03-01

OAAI

Shi, Xianzhe; Wang, Xiuxia; Chen, Biao; Umeda, Junko; Bahador, Abdollah; Kondoh, Katsuyoshi; Shen, Jianghua

Simultaneously enhancing strength and ductility of selective laser melted AlSi10Mg via introducing in-cell Al4C3 nanorods

MATERIALS RESEARCH LETTERS

IF7.9

2023-02-03

OAAI

Wan, Jie; Li, Kangan; Geng, Huarui; Chen, Biao; Shen, Jianghua; Guo, Yazhou; Kondoh, Katsuyoshi; Bahador, Abdollah; Li, Jinshan

Room temperature and high-temperature properties of extruded Ti-4Fe-3W/2TiC composites in ? plus ? and b phases

MATERIALS & DESIGN

IF7.9

2022-08-01

OAAI

Bahador, Abdollah; Yurtsever, Ayhan; Amrin, Astuty; Kariya, Shota; Umeda, Junko; Shen, Jianghua; Chen, Biao; Fukuma, Takeshi; Kondoh, Katsuyoshi

Ductility improvement of high-strength Ti-O material upon heteromicrostructure formation

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-05-01

PREAI

Kariya, Shota; Issariyapat, Ammarueda; Bahador, Abdollah; Umeda, Junko; Shen, Jianghua; Kondoh, Katsuyoshi

Microstructure Examination and Sliding Wear Behavior of Al-15%Mg2Si-xGd In Situ Composites before and after Hot Extrusion

LUBRICANTS

IF2.9

2021-12-24

OAAI

Ghandvar, Hamidreza; Jabbar, Mostafa Abbas; Bahador, Abdollah; Abu Bakar, Tuty Asma; Fadil, Nor Akmal; Kondoh, Katsuyoshi

Strengthening and deformation mechanism of selective laser-melted high-concentration nitrogen solute α-Ti materials with heterogeneous microstructures via heat treatment

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-10-01

OAAI

Issariyapat, Ammarueda; Bahador, Abdollah; Visuttipitukul, Patama; Li, Shufeng; Umeda, Junko; Kondoh, Katsuyoshi

Ultrafine-grain formation and improved mechanical properties of novel extruded Ti-Fe-W alloys with complete solid solution of tungsten

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-09-01

OAAI

Bahador, Abdollah; Umeda, Junko; Yamanoglu, Ridvan; Amrin, Astuty; Alhazaa, Abdulaziz; Kondoh, Katsuyoshi

Strength-ductility balance of powder metallurgy Ti-2Fe-2W alloy extruded at high-temperature

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-09-01

OAAI

Bahador, Abdollah; Issariyapat, Ammarueda; Umeda, Junko; Yamanoglu, Ridvan; Pruncu, Catalin; Amrin, Astuty; Kondoh, Katsuyoshi

Microstructure globularization of high oxygen concentration dual-phase extruded Ti alloys via powder metallurgy route

MATERIALS CHARACTERIZATION

IF5.5

2021-02-01

OAAI

Bahador, Abdollah; Umeda, Junko; Ghandvar, Hamidreza; Abu Bakar, Tuty Asma; Yamanoglu, Ridvan; Issariyapat, Ammarueda; Kondoh, Katsuyoshi

Strengthening evaluation and high-temperature behavior of Ti-Fe-O-Cu-Si alloy Ti-fe-o-cu-si合金的强化评价及高温行为

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-01-01

PREAI

Bahador, Abdollah; Umeda, Junko; Yamanoglu, Ridvan; Abu Bakar, Tuty Asma; Kondoh, Katsuyoshi

Mechanisms of tensile strengthening and oxygen solid solution in single β-phase Ti-35 at.%Ta+O alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-01-01

OAAI

Yokota, Katsuya; Bahador, Abdollah; Shitara, Kazuki; Umeda, Junko; Kondoh, Katsuyoshi

研究方向