科言猫
学术研究的AI总结
首页
文献互助
订阅
我的收藏
科研工具
选题分析
论文总结
专利管理
未登录
返回
P
Patryk Jakubczak
Lublin University of Technology
21
H指数
77
论文数
1.4K
被引数
0
相关解读
订阅
收录论文
33
发表时间
发表时间
IF
被引数
Enhancement of numerical model of low-velocity impact response of fibre metal laminates by adaptation of non-homogenous cohesive zone model and microstructural anisotropy of metal layers
通过适应性非均匀粘结区模型和金属层微观结构各向异性对纤维金属层压板低速冲击响应数值模型的增强
COMPOSITES SCIENCE AND TECHNOLOGY
IF
9.8
2025-07-01
0
PRE
AI
Jakubczak, Patryk; Podolak, Piotr; Biruk-Urban, Katarzyna; Bienias, Jaroslaw
分享
收藏
Experimental failure analysis of interlaminar and intralaminar delamination of titanium-based laminates with various surface treatment
钛基层合材料层间和层内分层实验失效分析及不同表面处理研究
Engineering Failure Analysis
IF
5.7
2025-06-18
0
PRE
AI
Magda Droździel-Jurkiewicz; Patryk Jakubczak; Jarosław Bieniaś
分享
收藏
Hybrid composite-metal structure response to post-impact compression - Experimental and numerical study
COMPOSITE STRUCTURES
IF
7.1
2025-01-01
2
PRE
AI
Podolak, Piotr; Jakubczak, Patryk; Bienias, Jaroslaw
分享
收藏
The assessment of the compressive strength of fibre metal laminates after low-velocity impact
COMPOSITE STRUCTURES
IF
7.1
2023-09-01
13
PRE
AI
Jakubczak, Patryk; Podolak, Piotr; Drozdziel-Jurkiewicz, Magda
分享
收藏
The Correlation of LVI Parameters and CAI Behaviour in Aluminium-Based FML
MATERIALS
IF
3.2
2023-04-19
5
OA
AI
Podolak, Piotr; Drozdziel-Jurkiewicz, Magda; Jakubczak, Patryk; Bienias, Jaroslaw
分享
收藏
The investigation of buckling response and damage of thin cross-ply CFRP laminates subjected to CAI
THIN-WALLED STRUCTURES
IF
6.6
2023-02-01
12
PRE
AI
Podolak, Piotr; Jakubczak, Patryk
分享
收藏
The issue of CAI assessment of Fibre Metal Laminates
纤维金属层压板的CAI评估问题
COMPOSITE STRUCTURES
IF
7.1
2022-02-01
17
OA
AI
Jakubczak, Patryk; Podolak, Piotr
分享
收藏
Numerical and experimental studies of the influence of curing and residual stresses on buckling in thin-walled, CFRP square-section profiles
COMPOSITE STRUCTURES
IF
7.1
2021-11-01
10
OA
AI
Czapski, Pawel; Jakubczak, Patryk; Lunt, Alexander J. G.; Kazmierczyk, Filip; Urbaniak, Mariusz; Kubiak, Tomasz
分享
收藏
Experimental Investigation on the Low Velocity Impact Response of Fibre Foam Metal Laminates
MATERIALS
IF
3.2
2021-09-23
5
OA
AI
Jakubczak, Patryk; Drozdziel, Magda; Podolak, Piotr; Pernas-Sanchez, Jesus
分享
收藏
The mechanical effects of kissing bonding defects in hybrid metal-composite laminates
COMPOSITE STRUCTURES
IF
7.1
2021-08-01
12
OA
AI
Drozdziel, Magda; Podolak, Piotr; Nardi, Davide; Jakubczak, Patryk
分享
收藏
Failure analysis of GFRP columns subjected to axial compression manufactured under various curing-process conditions
COMPOSITE STRUCTURES
IF
7.1
2021-04-01
11
PRE
AI
Drozdziel, Magda; Podolak, Piotr; Czapski, Pawel; Zgorniak, Piotr; Jakubczak, Patryk
分享
收藏
Short-beam shear fatigue life assessment of thermally cycled carbon-aluminium laminates with protective glass interlayers
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF
4.4
2021-03-11
6
OA
AI
Surowska, Barbara; Dadej, Konrad; Jakubczak, Patryk; Bienias, Jaroslaw
分享
收藏
The comparison of the veritable response to impact load of conventional and Thin-Ply types of fibre metal laminates
COMPOSITE STRUCTURES
IF
7.1
2021-02-01
11
PRE
AI
Jakubczak, Patryk
分享
收藏
Low-velocity impact resistance of thin-ply in comparison with conventional aluminium-carbon laminates
与常规铝碳层压板相比,薄层的低速抗冲击性
COMPOSITE STRUCTURES
IF
7.1
2021-01-01
11
PRE
AI
Drozdziel, M.; Jakubczak, P.; Bienias, J.
分享
收藏
Influence of manufacturing technique and autoclaving curing rate on the non-linear behaviour of thin-walled, GFRP channel columns - Experimental studies
THIN-WALLED STRUCTURES
IF
6.6
2020-12-01
8
PRE
AI
Czapski, Pawel; Jakubczak, Patryk; Zgornaik, Piotr; Kubiak, Tomasz; Bienias, Jaroslaw
分享
收藏
Influence of autoclaving process on the stability of thin-walled, composite columns with a square cross-section - Experimental and numerical studies
COMPOSITE STRUCTURES
IF
7.1
2020-10-01
19
OA
AI
Czapski, Pawel; Jakubczak, Patryk; Bienias, Jaroslaw; Urbaniak, Mariusz; Kubiak, Tomasz
分享
收藏
The collation of impact behaviour of titanium/carbon, aluminum/carbon and conventional carbon fibres laminates
钛/碳,铝/碳和常规碳纤维层压板的冲击行为的整理
THIN-WALLED STRUCTURES
IF
6.6
2020-10-01
41
PRE
AI
Jakubczak, Patryk; Bienias, Jaroslaw; Drozdziel, Magda
分享
收藏
Interlaminar Shear Strength and Failure Analysis of Aluminium-Carbon Laminates with a Glass Fiber Interlayer after Moisture Absorption
吸湿后具有玻璃纤维夹层的铝碳层压板的层间剪切强度和失效分析
MATERIALS
IF
3.2
2020-07-06
11
OA
AI
Bienias, Jaroslaw; Jakubczak, Patryk; Drozdziel, Magda; Surowska, Barbara
分享
收藏
Experimental and numerical investigation into the impact resistance of aluminium carbon laminates
COMPOSITE STRUCTURES
IF
7.1
2020-07-01
33
OA
AI
Jakubczak, Patryk; Bienias, Jaroslaw; Dadej, Konrad
分享
收藏
The Effect of Layer Thicknesses in Hybrid Titanium-Carbon Laminates on Low-Velocity Impact Response
MATERIALS
IF
3.2
2019-12-24
22
OA
AI
Jakubczak, Patryk; Bienias, Jaroslaw; Drozdziel, Magda; Podolak, Piotr; Harmasz, Aleksandra
分享
收藏
研究方向
暂时未获取到该数据
合作学者
合作期刊
J
Jos Sinke
H 指数: 28 · 论文数: 154
T
Tomasz Kubiak
H 指数: 25 · 论文数: 135
A
Alexander J.G. Lunt
H 指数: 24 · 论文数: 113
B
B. Surowska
H 指数: 23 · 论文数: 119
Z
Zbigniew Kołakowski
H 指数: 22 · 论文数: 138
查看更多