Toshio Ogasawara - Publications, H-index & Citations

Toshio Ogasawara

Tokyo University of Agriculture and Technology

41H指数

351论文数

5.5K被引数

收录论文 71

发表时间

Micro-damage progression and rupture behaviors of an orthogonal 3-D woven SiC fiber/SiC matrix composite under constant tensile load at intermediate temperatures in air 在空气中，SiC纤维/SiC基体复合材料的微观损伤演变和断裂行为：在恒定拉伸载荷和中等温度下的研究

Journal of the European Ceramic Society

IF6.2

2026-05-23

PREAI

Yudai Sone; Toshio Ogasawara; Takashi Matsumoto; Takuya Aoki

Damage Behavior of Multi-Step Lap Joints in CFRP laminates with Fiber Discontinuities 含纤维不连续的CFRP层合板中多步搭接接头的损伤行为

composites part b: engineering

IF0

2026-04-30

PREAI

Sae Katsumata; Toshio Ogasawara; Miu Lee; Sota Oshima; Kiyoshi Uzawa

Elucidating nonlinear I–V characteristics of unidirectional CFRP exposed to impulse current 阐明单向CFRP在脉冲电流作用下的非线性I-V特性

composites part a: applied science and manufacturing

IF0

2026-03-26

PREAI

Yutaro Nishikawa; Shintaro Kamiyama; Yoshiyasu Hirano; Toshio Ogasawara

Design and experimental demonstration of newly developed composite overwrapped pressure vessels with axial load members for fuel cell vehicles 新型带轴向承载构件的复合材料缠绕压力容器的设计与实验验证（用于燃料电池汽车）

International Journal of Hydrogen Energy

IF8.3

2025-10-20

PREAI

Toshio Ogasawara; Jin Serizawa; Ikumi Matsumoto; Tomohiro Yokozeki; Akinori Yoshimura

Damage Behavior and Progressive Damage Simulation of Multi-Step Butt Joint for CFRP Laminates 碳纤维增强复合材料层压板多步对接接头的损伤行为与渐进损伤模拟

Composites Part B: Engineering

IF0

2025-10-13

PREAI

Sae Katsumata; Toshio Ogasawara; Sota Oshima; Norio Hirayama; Kazuhiro Sakata; Kiyoshi Uzawa

Experimental and analytical study of a high-pressure hydrogen storage tank made of CFRP with dome-cylinder split molding structure for fuel cell vehicles

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2025-02-01

PREAI

Katsumata, Sae; Ogasawara, Toshio; Uchino, Takahisa; Hirayama, Norio; Sakata, Kazuhiro; Uzawa, Kiyoshi

High-temperature subcritical crack growth in a 3D woven SiC-based composite

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2025-01-05

PREAI

Kanazawa, Shingo; Ikarashi, Yoshito; Ogasawara, Toshio; Fukuhara, Satoru; Kubushiro, Keiji; Aoki, Takuya; Zok, Frank W.

Optimization design for hole geometries and fiber steering of composite laminates with a hole

COMPOSITE STRUCTURES

IF7.1

2025-01-01

PREAI

Mizumoto, Masataka; Asakawa, Kenji; Hirano, Yoshiyasu; Ogasawara, Toshio

Detection of matrix cracks in composite laminates using embedded fiber-optic distributed strain sensing

SENSORS AND ACTUATORS A-PHYSICAL

IF4.9

2024-12-01

PREAI

Ikeda, Yukino; Takeda, Shin-ichi; Hisada, Shinsaku; Ogasawara, Toshio

Mechanical properties of SiC fiber/carbon/Si-Co matrix composites processed using film boiling and melt infiltration

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2024-11-28

PREAI

Miura, Takashi; Ogasawara, Toshio; Aoki, Takuya; Kubota, Yuki; Abe, Keisuke; Kawakami, Kosuke

Nonlinear electrical conductivity characteristics under high impulse current and applications to lightning strike damage simulation for CFRP laminates 高冲动电流下的非线性导电特性及其在CFRP层合板雷击损伤模拟中的应用

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-08-01

PREAI

Fujisawa, Yu; Sato, Takumi; Hirano, Yoshiyasu; Kamiyama, Shintaro; Ogasawara, Toshio

Radiation heating tests to evaluate low-emissivity porous ceramics coatings for stand-off thermal protection systems

ACTA ASTRONAUTICA

IF3.4

2024-06-01

PREAI

Akamine, Shuko; Sudo, Yasuko; Ogawa, Chiharu; Aoki, Takuya; Ogasawara, Toshio

Clarifying the mechanisms of edge glow generation in CFRP laminates exposed to simulated lightning currents

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-02-01

PREAI

Kamiyama, Shintaro; Okada, Takao; Hirano, Yoshiyasu; Sonehara, Takeo; Miyaki, Hiromitsu; Ogasawara, Toshio

Bio-inspired study of stiffener arrangement in composite stiffened panels using a Voronoi diagram as an indicator

COMPOSITE STRUCTURES

IF7.1

2024-01-01

OAAI

Asakawa, Kenji; Hirano, Yoshiyasu; Tan, Kwek-Tze; Ogasawara, Toshio

Raman spectroscopy used for estimating the effective elastic modulus of carbon nanotubes in aligned multi-walled carbon nanotubes/ epoxy composites under tensile loading

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2023-04-01

PREAI

Aoki, Ayaka; Ogasawara, Toshio; Aoki, Takuya; Ishida, Yuichi; Shimamura, Yoshinobu; Inoue, Yoku

Machine learning algorithms for deeper understanding and better design of composite adhesive joints 用于更深入理解和更好设计复合材料胶接接头的机器学习算法

MATERIALS TODAY COMMUNICATIONS

IF4.5

2023-03-01

OAAI

Kaiser, Isaiah; Richards, Natalie; Ogasawara, Toshio; Tan, K. T.

In situ optical observation of damage and failure process in adhesively bonded CFRP joints under mixed-mode loading

COMPOSITE STRUCTURES

IF7.1

2023-02-01

PREAI

Oshima, Sota; Mikami, Tomoisa; Yoshimura, Akinori; Hirano, Yoshiyasu; Ogasawara, Toshio

I-V characteristics and temperature response of unidirectional CFRP exposed to simulated lightning current in the fiber direction

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-11-01

PREAI

Kamiyama, Shintaro; Hirano, Yoshiyasu; Okada, Takao; Sonehara, Takeo; Ogasawara, Toshio

Application of machine learning for improved accuracy of simultaneous temperature and strain measurements of carbon fiber-reinforced plastic laminates using an embedded tilted fiber Bragg grating sensor

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-10-01

PREAI

Kikuchi, Mikiko; Ogasawara, Toshio; Fujii, Shunpei; Takeda, Shin-ichi

Evaluation of thermosetting resin curing using a tilted fiber Bragg grating

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-07-01

PREAI

Hirota, Itsuhiko; Takeda, Shin-ichi; Ogasawara, Toshio

研究方向