L.‐M. Berger - Publications, H-index & Citations

L.‐M. Berger

fraunhofer gesellschaft

38H指数

162论文数

4.1K被引数

收录论文 58

发表时间

Effect of carbon content and metal binder type on phase composition in high-entropy carbide-based hardmetals 碳含量和金属粘结剂类型对高熵碳化物基硬质合金相组成的影响

International Journal of Refractory Metals and Hard Materials

IF4.6

2025-12-08

PREAI

Marek Tarraste; Johannes Pötschke; Lutz-Michael Berger; Kristjan Juhani; Jakob Kübarsepp; Furqan Anwar

On the relationship between particle melting degree and phase transformation of alumina and alumina-based solid solution powders during atmospheric plasma spraying 关于颗粒熔融程度与等离子喷涂过程中氧化铝及氧化铝基固溶体粉末相变之间的关系

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-06-05

PREAI

Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Lampke, Thomas

Microstructure and wear resistance of environmentally friendly NbC-FeCr coatings: An evaluation of HVOF process parameters 环保型NbC-FeCr涂层的微观结构与耐磨性：HVOF工艺参数的评估

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-05-30

PREAI

Tegelkamp, Lukas; Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Lindner, Thomas; Lampke, Thomas

Influence of Feedstock and Thermal Spray Process on the Phase Composition of Alumina Coatings and Their Sliding Wear

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2023-06-19

OAAI

Ali, Omar; Ahmed, Rehan; Toma, Filofteia-Laura; Berger, Lutz-Michael; Matthey, Bjoern; Faisal, Nadimul; Ahmed, Khalid

Microstructures and property profiles of atmospheric plasma sprayed (Al, Cr,Ti)2O3 solid solution coatings

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-03-01

PREAI

Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Thiele, Sven; Lindner, Thomas; Lampke, Thomas

Atmospheric Plasma Spraying of Different MgO/Al2O3 Feedstocks

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2023-02-02

OAAI

Vassen, Robert; Kalfhaus, Tobias; Vorkoetter, Christoph; Sohn, Yoo Jung; Conze, Susan; Berger, Lutz-Michael

Wear resistance of HVOF- and HVAF-sprayed (Ti,Mo)(C,N)-Ni coatings from an agglomerated and sintered powder

WEAR

IF6.1

2023-01-01

PREAI

Bolelli, Giovanni; Lyphout, Christophe; Berger, Lutz-Michael; Testa, Veronica; Myalska-Glowacka, Hanna; Puddu, Pietro; Sassatelli, Paolo; Lusvarghi, Luca

Microstructure and Properties of Atmospheric Plasma Sprayed (Al,Cr)2O3-TiO2 Coatings from Blends

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2021-11-30

OAAI

Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Drehmann, Rico; Lampke, Thomas

Fine grained titanium carbonitride reinforcements for laser deposition processes of 316L boost tribocorrosion resistance in marine environments

MATERIALS & DESIGN

IF7.9

2021-09-01

OAAI

Pejakovic, Vladimir; Berger, Lutz-Michael; Thiele, Sven; Rojacz, Harald; Ripoll, Manel Rodriguez

Influence of simultaneous Cr2O3 and TiO2 additions on the microstructure and properties of APS alumina coatings 同时添加Cr2O3和TiO2对APS氧化铝涂层的微观结构和性能的影响

SURFACE & COATINGS TECHNOLOGY

IF6.1

2021-01-01

PREAI

Conze, S.; Grimm, M.; Berger, L-M; Thiele, S.; Drehmann, R.; Lampke, T.

Changes in the Coating Composition Due to APS Process Conditions for Al2O3-Cr2O3-TiO2 Ternary Powder Blends

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2020-12-16

OAAI

Grimm, Maximilian; Conze, Susan; Berger, Lutz-Michael; Paczkowski, Gerd; Drehmann, Rico; Lampke, Thomas

Creation of modified Cr3C2-NiCr hardmetal coating microstructures through novel processing

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-05-01

PREAI

Matthews, Steven; Bhagvandas, Meetal; Berger, Lutz-Michael

Impact of Al2O3-40 wt.% TiO2 feedstock powder characteristics on the sprayability, microstructure and mechanical properties of plasma sprayed coatings

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2019-12-01

PREAI

Richter, Alexei; Berger, Lutz-Michael; Sohn, Yoo Jung; Conze, Susan; Sempf, Kerstin; Vassen, Robert

Inter-diffusion between thermally sprayed Cr3C2-NiCr coatings and an Alloy 625 substrate during long-term exposure at 500 °C, 700 °C and 900 °C

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2019-01-01

PREAI

Matthews, Steven; Berger, Lutz-Michael

Comparative Study of Corrosion Performance of HVOF-Sprayed Coatings Produced Using Conventional and Suspension WC-Co Feedstock 使用常规和悬浮液wc-co原料生产的HVOF喷涂涂层的腐蚀性能的比较研究

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2018-10-30

OAAI

Ahmed, R.; Vourlias, G.; Algoburi, A.; Vogiatzis, C.; Chaliampalias, D.; Skolianos, S.; Berger, L. -M.; Paul, S.; Faisal, N. H.; Toma, F. -L.; Al-Anazi, N. M.; Goosen, M. F. A.

Influence of Feedstock Powder Modification by Heat Treatments on the Properties of APS-Sprayed Al2O3-40% TiO2 Coatings

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2018-03-28

PREAI

Berger, Lutz-Michael; Sempf, Kerstin; Sohn, Yoo Jung; Vassen, Robert

Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition

SURFACE & COATINGS TECHNOLOGY

IF6.1

2018-03-01

PREAI

Janka, Leo; Berger, Lutz-Michael; Norpoth, Jonas; Trache, Richard; Thiele, Sven; Tomastik, Christian; Matikainen, Ville; Vuoristo, Petri