logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
A

Ahmed Elkaseer

engineering

24H指数
132论文数
2.2K被引数
收录论文 28
发表时间
logo
Flashless forging of roller bearings in a single stroke enabled by numerical simulation and validated experimentally无飞边单次冲击锻造滚珠轴承的数值模拟与实验验证
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-06-03
err0
PREAI
errAhmed G Shaker; Mazen Amer; May Abdellatif; Omar Mohsen; Ahmed Elkaseer; Iman El-Mahallawi
err分享
err收藏
Satellite-free droplet formation in material jetting via rheology-driven waveform modelling approach无卫星液滴的材料喷射中的流变学驱动波形建模方法
errMaterials & Design
IF7.9
err2025-12-02
err0
errOAAI
errKarin J. Chen; Veit Hagenmeyer; Ahmed Elkaseer
err分享
err收藏
Investigation of Surface Quality and Productivity in Precision Hard Turning of AISI 4340 Steel Using Integrated Approach of ML-MOORA-PSO采用ML-MOORA-PSO集成方法研究AISI 4340钢精密硬车削的表面质量与生产率
errPROCESSES
IF2.8
err2025-04-10
err0
errOAAI
errAbbas, Adel T.; Sharma, Neeraj; Alqosaibi, Khalid F.; Abbas, Mohamed A.; Sharma, Rakesh Chandmal; Elkaseer, Ahmed
err分享
err收藏
Effects of die type on mechanical performance and failure behaviors of self-piercing riveting joints in AA5052
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-03-01
err0
errOAAI
errZhao, Lun; Monier, Amr; Zhang, Ao; Li, Liya; Elkaseer, Ahmed; Abbas, Zeshan; Ye, Kai
err分享
err收藏
Nano-second pulsed laser ablation of inconel 718 and MMPCD for simultaneous optimal ablation rate and surface quality
errSCIENTIFIC REPORTS
IF3.9
err2024-12-30
err0
errOAAI
errElkaseer, Ahmed; Abdelgaliel, Islam H.; Lambarri, Jon; Quintana, Iban; Scholz, Steffen; Aly, Mohamed F.
err分享
err收藏
Wire Electrical Discharge Machining of AISI304 and AISI316 Alloys: A Comparative Assessment of Machining Responses, Empirical Modeling and Multi-Objective Optimization
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2023-11-03
err3
errOAAI
errAboueleaz, Mona A.; Naeim, Noha; Abdelgaliel, Islam H.; Aly, Mohamed F.; Elkaseer, Ahmed
err分享
err收藏
On the quantitative assessment of the effect of multiple process parameters on the printed layer height in 3D inkjet printing
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2023-10-24
err1
errOAAI
errElkaseer, Ahmed; Chen, Karin J.; Kuchta, Matthias; Scholz, Steffen G.
err分享
err收藏
Influence of Technological Parameters on Chip Formation and Chip Control in Precision Hard Turning of Ti-6Al-4V
errMICROMACHINES
IF3
err2023-10-23
err2
errOAAI
errAbdelnasser, Elshaimaa; El-Sanabary, Samar; Nassef, Ahmed; Barakat, Azza; Elkaseer, Ahmed
err分享
err收藏
A Machine Learning Perspective to the Investigation of Surface Integrity of Al/SiC/Gr Composite on EDM从机器学习的角度研究电火花加工Al/SiC/Gr复合材料的表面完整性
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2023-09-08
err8
errOAAI
errAbbas, Adel T.; Sharma, Neeraj; Al-Bahkali, Essam A.; Sharma, Vishal S.; Farooq, Irfan; Elkaseer, Ahmed
err分享
err收藏
Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts熔融沉积成型 (FDM) 零件的气相抛光: 对不同技术的严格审查，以及后处理3d打印零件的后续表面光洁度和机械性能
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2023-03-03
err27
errOAAI
errMathew, Amal; Kishore, S. Ram; Tomy, Anchil Tona; Sugavaneswaran, M.; Scholz, Steffen G.; Elkaseer, Ahmed; Wilson, Vincent H.; Rajan, A. John
err分享
err收藏
Experimental Investigation of Surface Roughness and Material Removal Rate in Wire EDM of Stainless Steel 304不锈钢304电火花线加工表面粗糙度和材料去除率的实验研究
errMATERIALS
IF3.2
err2023-01-23
err13
errOAAI
errNaeim, Noha; AbouEleaz, Mona A.; Elkaseer, Ahmed
err分享
err收藏
Brain Tumor Classification Using Hybrid Single Image Super-Resolution Technique With ResNext101_32 x 8d and VGG19 Pre-Trained Models
errIEEE ACCESS
IF3.6
err2023-01-01
err18
errOAAI
errMohsen, Saeed; Ali, Anas M.; El-Rabaie, El-Sayed M.; ElKaseer, Ahmed; Scholz, Steffen G.; Hassan, Ashraf Mohamed Ali
err分享
err收藏
Gas-tight means zero defects- design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion
errMATERIALS & DESIGN
IF7.9
err2022-11-01
err3
errOAAI
errGrinschek, Fabian; Charles, Amal; Elkaseer, Ahmed; Klahn, Christoph; Scholz, Steffen G.; Dittmeyer, Roland
err分享
err收藏
Non-Invasive Data Acquisition and IoT Solution for Human Vital Signs Monitoring: Applications, Limitations and Future Prospects
errSENSORS
IF3.5
err2022-09-01
err10
errOAAI
errSalem, Mahmoud; Elkaseer, Ahmed; El-Maddah, Islam A. M.; Youssef, Khaled Y.; Scholz, Steffen G.; Mohamed, Hoda K.
err分享
err收藏
Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
errMATERIALS
IF3.2
err2022-05-05
err13
errOAAI
errSolheid, Juliana S.; Elkaseer, Ahmed; Wunsch, Torsten; Scholz, Steffen; Seifert, Hans J.; Pfleging, Wilhelm
err分享
err收藏
A Closer Look at Precision Hard Turning of AISI4340: Multi-Objective Optimization for Simultaneous Low Surface Roughness and High Productivity
errMATERIALS
IF3.2
err2022-03-12
err13
errOAAI
errAbbas, Adel T.; Al-Abduljabbar, Abdulhamid A.; Alnaser, Ibrahim A.; Aly, Mohamed F.; Abdelgaliel, Islam H.; Elkaseer, Ahmed
err分享
err收藏
Fundamental Investigation into Tool Wear and Surface Quality in High-Speed Machining of Ti6Al4V Alloy
errMATERIALS
IF3.2
err2021-11-23
err14
errOAAI
errAbbas, Adel T.; Al Bahkali, Essam A.; Alqahtani, Saeed M.; Abdelnasser, Elshaimaa; Naeim, Noha; Elkaseer, Ahmed
err分享
err收藏
Effect of Different Cooling Strategies on Surface Quality and Power Consumption in Finishing End Milling of Stainless Steel 316
errMATERIALS
IF3.2
err2021-02-14
err23
errOAAI
errAbbas, Adel T.; Anwar, Saqib; Abdelnasser, Elshaimaa; Luqman, Monis; Qudeiri, Jaber E. Abu; Elkaseer, Ahmed
err分享
err收藏
Industry 4.0-Oriented Deep Learning Models for Human Activity Recognition面向行业4.0的人体行为识别深度学习模型
errIEEE ACCESS
IF3.6
err2021-01-01
err33
errOAAI
errMohsen, Saeed; Elkaseer, Ahmed; Scholz, Steffen G.
err分享
err收藏
Development of an Efficient Prediction Model for Optimal Design of Serial Production Lines
errIEEE ACCESS
IF3.6
err2021-01-01
err4
errOAAI
errAlkhalefah, Hisham; Qudeiri, Jaber E. Abu; Umer, Usama; Abidi, Mustufa Haider; Elkaseer, Ahmed
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
A
Abdel‐Hamid I. Mourad
H 指数: 51 · 论文数: 463
V
Vishal S. Sharma
H 指数: 45 · 论文数: 217
R
Roland Dittmeyer
H 指数: 41 · 论文数: 394
E
El‐Sayed M. El‐Rabaie
H 指数: 40 · 论文数: 558
H
Hussien Hegab
H 指数: 36 · 论文数: 123
查看更多