Paul Rometsch

rio tinto aluminium

H指数:44

被引数:6,893

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

On the bending anisotropy of a peak-aged recrystallized Al-Mg-Si extrusion alloy

关于峰值时效再结晶Al-Mg-Si挤压合金的弯曲各向异性

Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing

IF7

2026-09-070

PRE

Microstructural Evolution and Mechanical Behavior of L-PBF Al-Cu 224 Alloy: Role of Process Parameters and Heat Treatment

L-PBF Al-Cu 224 合金的微观结构演变与力学行为：工艺参数与热处理的作用

Journal of Manufacturing and Materials Processing

IF3.3

2026-06-160

Study of 1xxx aluminum extrusion alloys for brazed heat exchangers: Influences of Sc/Zr microalloying and thermomechanical processing

1xxx铝挤压合金在钎焊换热器中的应用研究：Sc/Zr微合金化及热机械处理的影响

Journal of Materials Research and Technology

IF6.6

2026-04-020

OAAI

Influence of extrusion preheating temperature and aging strategy on precipitation and performance of Al–Sc–Zr conductor alloys

挤压预加热温度和时效策略对Al–Sc–Zr导体合金沉淀和性能的影响

Materials Today Communications

IF4.5

2026-02-240

OAAI

Advanced thermal-resistant aluminum conductor alloys: A comprehensive review

先进耐热铝合金导线：综合评述

International Journal of Minerals, Metallurgy and Materials

IF0

2025-12-220

PRE

Tailoring microstructure and mechanical properties of an AA5454 extruded aluminum alloy with Sc/Zr microalloying and processing conditions

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-12-010

OAAI

Effect of Hardening Rate on the Bendability and Fracture Response of AA6082 Aluminum Extrusions in the VDA238-100 Tight Radius Bend Test

硬化速率对AA6082铝合金挤压型材在VDA238-100小半径弯曲试验中的弯曲性能和断裂响应的影响

Metals 2025, Vol. 15, Page 1199

IF2.5

2025-10-280

OAAI

Effect of hot deformation parameters on the performance and thermomechanical behavior of Cu-modified Al–Mg–Si conductor alloys

热变形参数对Cu改性Al–Mg–Si导体合金性能和热机械行为的影响

Journal of Materials Science

IF3.9

2025-10-060

PRE

Effect of natural ageing on the early-stage ageing response of an Al-Mg-Si-Cu alloy

自然时效对Al-Mg-Si-Cu合金早期时效响应的影响

Journal of Materials Science & Technology

IF14.3

2025-09-190

PRE

Effect of Mn on Microstructural Characteristics and Mechanical Behavior of AlSi10Mg Alloys Produced by Laser Powder Bed Fusion

Mn对激光粉末床熔融制备的AlSi10Mg合金微观结构特征及力学行为的影响

Additive Manufacturing

IF11.1

2025-08-070

PREAI

Recrystallization Behavior of Cold-Rolled AA5083 Microalloyed with 0.1 wt.% Sc and 0.08 wt.% Zr

冷轧AA5083微合金化0.1 wt.% Sc和0.08 wt.% Zr的再结晶行为

MATERIALS

IF3.2

2025-04-090

Laser-Based Additive Manufacturing Processability and Mechanical Properties of Al-Cu 224 Alloys with TiB Grain Refiner Additions

MATERIALS

IF3.2

2025-01-230

OAAI

Evolution of mechanical properties and microstructure of selective laser melted AlSi10MgMn alloy with different post heat treatments

不同热处理后选区激光熔化AlSi10MgMn合金力学性能及组织演变

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-11-011

OAAI

Mechanical and corrosion performances of Al-Mg-Mn 5083 rolled alloys microalloyed with Sc and Zr in different thermomechanical processing conditions

JOURNAL OF MATERIALS SCIENCE

IF3.9

2024-07-292

PRE

Impact of hot rolling temperature on the mechanical properties and microstructural evolution of hot/cold-rolled AA5083 with Sc and Zr microalloying

热轧温度对Sc和Zr微合金化热/冷轧AA5083力学性能和组织演变的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-03-015

OAAI

Effects of AlMn dispersoids and Al3(Sc,Zr) precipitates on the microstructure and ambient/elevated-temperature mechanical properties of hot-rolled AA5083 alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-10-0118

OAAI

Evolution of discontinuous/continuous Al3(Sc,Zr) precipitation in Al-Mg-Mn 5083 alloy during thermomechanical process and its impact on tensile properties

Al-mg-mn 5083合金热机械过程中Al3(Sc，Zr) 不连续/连续析出的演变及其对拉伸性能的影响

MATERIALS CHARACTERIZATION

IF5.5

2022-10-0118

OAAI

Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion

MATERIALS & DESIGN

IF7.9

2022-07-01138

OAAI

Effect of platform temperature on microstructure and corrosion resistance of selective laser melted Al-Mg-Sc alloy plate

平台温度对选区激光熔化al-mg-sc合金板材组织及耐蚀性的影响

JOURNAL OF CENTRAL SOUTH UNIVERSITY

IF4.4

2022-04-116

PRE

Enhanced Elevated-Temperature Strength and Creep Resistance of Dispersion-Strengthened Al-Mg-Si-Mn AA6082 Alloys through Modified Processing Route

通过改进的加工路线提高了弥散强化al-mg-si-mn AA6082合金的高温强度和抗蠕变性

MATERIALS

IF3.2

2021-09-232

OAAI

Paul Rometsch

个人简介

教育背景

工作经历

荣誉奖项

研究方向