T.B. Sercombe - Publications, H-index & Citations

T.B. Sercombe

Error

43H指数

96论文数

8.0K被引数

收录论文 58

发表时间

Application of machine learning for in-situ defect detection in metal powder bed fusion: a critical review 机器学习在金属粉末床熔融原位缺陷检测中的应用：一项综述

Journal of Intelligent Manufacturing

IF7.4

2026-05-05

OAAI

Addam Edwards; Du Q. Huynh; Bobby Gillham; Jincheng Wang; Timothy B. Sercombe

Cracking behaviour in 3D concrete printed fibre-reinforced cementitious composites: A review 3D混凝土打印纤维增强水泥基复合材料中的开裂行为：综述

Journal of Building Engineering

IF7.4

2025-10-06

OAAI

Mohammad Reza Delavar; Farhad Aslani; Tim Sercombe

Rate-dependent behaviour of additively manufactured topology optimised lattice structures 增材制造的拓扑优化晶格结构的速率相关行为

THIN-WALLED STRUCTURES

IF6.6

2024-05-01

OAAI

Alkhatib, Sami E.; Xu, Shanqing; Lu, Guoxing; Karrech, Ali; Sercombe, Timothy B.

On the importance of nano-oxide control in laser powder bed fusion manufactured Ni-based alloys to enhance fracture properties

MATERIALIA

IF2.9

2023-12-01

OAAI

Peters, Marc; Brodie, Erin G.; Thomas, Sebastian; Djumas, Lee; Brameld, Michael; Salasi, Mobin; Quadir, Zakaria; Iannuzzi, Mariano; Wang, Jincheng; Sercombe, Timothy; Hutchinson, Christopher

Understanding the effect of microstructural texture on the anisotropic elastic properties of selective laser melted Ti-24Nb-4Zr-8Sn 了解微结构织构对选择性激光熔化Ti-24Nb-4Zr-8Sn各向异性弹性性能的影响

ACTA MATERIALIA

IF9.3

2023-08-01

OAAI

Challis, Vivien J.; Xu, Xiaoxue; Halfpenny, Angela; Cramer, Andrew D.; Saunders, Martin; Roberts, Anthony P.; Sercombe, T. B.

Dynamic constitutive behavior of LPBFed metal alloys

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-07-01

OAAI

Alkhatib, Sami E.; Xu, Shanqing; Lu, Guoxing; Karrech, Ali; Sercombe, Timothy B.

Isotropic energy absorption of topology optimized lattice structure 拓扑优化晶格结构的各向同性能量吸收

THIN-WALLED STRUCTURES

IF6.6

2023-01-01

PREAI

Alkhatib, Sami E.; Karrech, Ali; Sercombe, Timothy B.

High strain-rate response of additively manufactured light metal alloys

MATERIALS & DESIGN

IF7.9

2022-05-01

OAAI

Alkhatib, Sami E.; Sercombe, Timothy B.

Comparison of microstructure and mechanical behavior of Ti-35Nb manufactured by laser powder bed fusion from elemental powder mixture and prealloyed powder

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2022-04-01

PREAI

Wang, J. C.; Liu, Y. J.; Liang, S. X.; Zhang, Y. S.; Wang, L. Q.; Sercombe, T. B.; Zhang, L. C.

Effect of low temperature crystallization on 58S bioactive glass sintering and compressive strength

CERAMICS INTERNATIONAL

IF5.6

2021-11-01

PREAI

Panah, Neda Ghaebi; Atkin, Rob; Sercombe, Timothy B.

Characterization of Cryogenic Material Properties of 3-D-Printed Superconducting Niobium Using a 3-D Lumped Element Microwave Cavity

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

IF5.9

2021-01-01

OAAI

McAllister, Ben T.; Bourhill, Jeremy; Ma, Wing Him Jacob; Sercombe, Tim; Goryachev, Maxim; Tobar, Michael E.

Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2021-01-01

PREAI

Wang, Jincheng; Liu, Yujing; Rabadia, Chirag Dhirajlal; Liang, Shun-Xing; Sercombe, Timothy Barry; Zhang, Lai-Chang

Enhanced corrosion resistance of Ti-5 wt.% TiN composite compared to commercial pure Ti produced by selective laser melting in HCl solution 与在HCl溶液中通过选择性激光熔化生产的商业纯钛相比，Ti-5 wt。% TiN复合材料的耐腐蚀性增强

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-04-01

PREAI

Zhou, Shengfeng; Zhao, Yu; Wang, Xiaojian; Li, Wei; Chen, Dongchu; Sercombe, T. B.

Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-07-01

167

PREAI

Wang, J. C.; Liu, Y. J.; Qin, P.; Liang, S. X.; Sercombe, T. B.; Zhang, L. C.

Improved deformation behavior in Ti-Zr-Fe-Mn alloys comprising the C14 type Laves and β phases

MATERIALS & DESIGN

IF7.9

2018-12-01

OAAI

Rabadia, C. D.; Liu, Y. J.; Jawed, S. F.; Wang, L.; Li, Y. H.; Zhang, X. H.; Sercombe, T. B.; Sun, H.; Zhang, L. C.

High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2018-08-01

101

PREAI

Rabadia, C. D.; Liu, Y. J.; Cao, G. H.; Li, Y. H.; Zhang, C. W.; Sercombe, T. B.; Sun, H.; Zhang, L. C.

Early plastic deformation behaviour and energy absorption in porous β-type biomedical titanium produced by selective laser melting

SCRIPTA MATERIALIA

IF5.6

2018-08-01

128

PREAI

Liu, Y. J.; Li, S. J.; Zhang, L. C.; Hao, Y. L.; Sercombe, T. B.

Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment

ACS BIOMATERIALS SCIENCE & ENGINEERING

IF5.5

2018-05-11

PREAI

Qin, Peng; Liu, Yujing; Sercombe, Timothy B.; Li, Yuhua; Zhang, Chuanwei; Cao, Chongde; Sun, Hongqi; Zhang, Lai-Chang

Phase separation and properties of Cu-Fe-Cr-Si-C immiscible nanocomposite by laser induction hybrid cladding

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2018-04-01

PREAI

Zhou, Shengfeng; Dai, Xiaoqin; Xie, Min; Zhao, Shuzhen; Sercombe, Timothy B.

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting 用于3D生物打印的藻酸盐-明胶水凝胶的机械行为

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2018-03-01

311

PREAI

Di Giuseppe, Michael; Law, Nicholas; Webb, Braeden; Macrae, Ryley A.; Liew, Lawrence J.; Sercombe, Timothy B.; Dilley, Rodney J.; Doyle, Barry J.

研究方向