Itziar Serrano-Munoz

Federal Institute for Materials Research and Testing

H指数:18

被引数:1,494

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Numerical investigations on crack initiation and propagation paths in a VHCF specimen with an artificial defect

含人工缺陷的VHCF试样中裂纹萌生与扩展路径的数值研究

Engineering Fracture Mechanics

IF5.3

2026-10-060

PRE

Rationalizing the microstructure interplay in the thermal conductivity of a metal matrix composite via 3D imaged-based finite element modeling

通过基于三维图像的有限元建模理性化金属基复合材料的微观结构在热导率中的相互作用

International Journal of Heat and Mass Transfer

IF5.8

2026-03-280

OAAI

The impact of scanning strategy on cell structures in PBF-LB/M/IN718: an in situ synchrotron x-ray diffraction study

扫描策略对PBF-LB/M/IN718细胞结构的影响：一项原位同步辐射X射线衍射研究

Journal of Materials Research and Technology

IF6.6

2025-11-270

OAAI

Subgrain and Cavity Development during Creep of Al-3.85%Mg

蠕变过程中Al-3.85%Mg的亚晶和空腔发展

Advanced Engineering Materials

IF3.3

2025-10-280

OAAI

Statistical analysis of grains and pores within polycrystalline Al 2TiO 5 ceramics, based on X-ray computed tomography

基于X射线计算机断层扫描对多晶Al₂TiO₅陶瓷中颗粒和孔隙的统计分析

Materials Characterization

IF5.5

2025-10-130

OAAI

On the closure of thermally induced micro-cracks in aluminum titanate ceramics

关于热致微裂纹在铝钛酸盐陶瓷中的闭合

Ceramics International

IF5.6

2025-09-160

OAAI

Identification of damage mechanisms in a metal-matrix composite material via digital volume correlation and finite element model updating

通过数字体积相关法和有限元模型修正识别金属基复合材料的损伤机制

Materials Today Communications

IF4.5

2025-07-300

Revealing the (positive) role of porosity within polymeric additively manufactured lattices via X-ray computed tomography

通过X射线计算机断层扫描揭示多孔性在聚合物增材制造晶格中的（正向）作用

International Journal of Solids and Structures

IF3.8

2025-06-030

Investigation on the fatigue strength of AlSi10Mg fabricated by PBF-LB/M and subjected to low temperature heat treatments

Pbf-lb/M低温热处理AlSi10Mg乏力强度的研究

MATERIALS & DESIGN

IF7.9

2024-08-012

OAAI

Sliding wear resistance and residual stresses of parts repaired by laser metal deposition

JOURNAL OF MATERIALS SCIENCE

IF3.9

2023-12-062

Sintered Brake Pads Failure in High-Energy Dissipation Braking Tests: A Post-Mortem Mechanical and Microstructural Analysis

MATERIALS

IF3.2

2023-11-013

OAAI

Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy

后处理对pbf-lb/M AlSi10Mg合金乏力裂纹扩展行为的影响

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2023-10-0114

OAAI

High-resolution Bragg-edge neutron radiography detects grain morphology in PBF-LB/M IN718

高分辨率布拉格边缘中子射线照相术检测pbf-lb/M IN718中的晶粒形态

MATERIALIA

IF2.9

2023-08-010

PRE

The stress-strain behavior of refractory microcracked aluminum titanate: The effect of zigzag microcracks and its modeling

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2023-07-248

Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy

JOURNAL OF MATERIALS SCIENCE

IF3.9

2022-12-085

Influence of the Composition on the Compressive Behaviour of a Semi-Metallic Brake-Pad Material

MATERIALS

IF3.2

2022-11-092

OAAI

Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718

JOURNAL OF MATERIALS SCIENCE

IF3.9

2022-08-0819

Synchrotron X-ray refraction detects microstructure and porosity evolution during in-situ heat treatments

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-03-0114

OAAI

Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity

ADVANCED ENGINEERING MATERIALS

IF3.3

2022-01-1711

OAAI

3D Computed Tomography Quantifies the Dependence of Bulk Porosity, Surface Roughness, and Re-Entrant Features on Build Angle in Additively Manufactured IN625 Lattice Struts

3D计算机断层扫描量化了增材制造的IN625晶格支柱中体积孔隙率，表面粗糙度和凹入特征对构建角的依赖性

ADVANCED ENGINEERING MATERIALS

IF3.3

2021-09-2414

OAAI

Itziar Serrano-Munoz

个人简介

教育背景

工作经历

荣誉奖项

研究方向