Yoshiyasu Hirano - Publications, H-index & Citations

Yoshiyasu Hirano

japan aerospace exploration agency

31H指数

164论文数

5.3K被引数

收录论文 27

发表时间

Elucidating nonlinear I–V characteristics of unidirectional CFRP exposed to impulse current 阐明单向CFRP在脉冲电流作用下的非线性I-V特性

composites part a: applied science and manufacturing

IF0

2026-03-26

PREAI

Yutaro Nishikawa; Shintaro Kamiyama; Yoshiyasu Hirano; Toshio Ogasawara

Optimization design for hole geometries and fiber steering of composite laminates with a hole

COMPOSITE STRUCTURES

IF7.1

2025-01-01

PREAI

Mizumoto, Masataka; Asakawa, Kenji; Hirano, Yoshiyasu; Ogasawara, Toshio

Nonlinear electrical conductivity characteristics under high impulse current and applications to lightning strike damage simulation for CFRP laminates 高冲动电流下的非线性导电特性及其在CFRP层合板雷击损伤模拟中的应用

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-08-01

PREAI

Fujisawa, Yu; Sato, Takumi; Hirano, Yoshiyasu; Kamiyama, Shintaro; Ogasawara, Toshio

Clarifying the mechanisms of edge glow generation in CFRP laminates exposed to simulated lightning currents

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-02-01

PREAI

Kamiyama, Shintaro; Okada, Takao; Hirano, Yoshiyasu; Sonehara, Takeo; Miyaki, Hiromitsu; Ogasawara, Toshio

Bio-inspired study of stiffener arrangement in composite stiffened panels using a Voronoi diagram as an indicator

COMPOSITE STRUCTURES

IF7.1

2024-01-01

OAAI

Asakawa, Kenji; Hirano, Yoshiyasu; Tan, Kwek-Tze; Ogasawara, Toshio

Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer

HELIYON

IF3.6

2023-03-01

OAAI

Le Duigou, A.; Grabow, M.; Castro, M.; Toumi, R.; Ueda, M.; Matsuzaki, R.; Hirano, Y.; Dirrenberger, J.; Scarpa, F.; D'Elia, R.; Labstie, K.; Lafont, U.

In situ optical observation of damage and failure process in adhesively bonded CFRP joints under mixed-mode loading

COMPOSITE STRUCTURES

IF7.1

2023-02-01

PREAI

Oshima, Sota; Mikami, Tomoisa; Yoshimura, Akinori; Hirano, Yoshiyasu; Ogasawara, Toshio

I-V characteristics and temperature response of unidirectional CFRP exposed to simulated lightning current in the fiber direction

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-11-01

PREAI

Kamiyama, Shintaro; Hirano, Yoshiyasu; Okada, Takao; Sonehara, Takeo; Ogasawara, Toshio

Reinforcing in the lay-up direction with self-heating for carbon fiber composites fabricated using a fused filament fabrication 3D printer

COMPOSITE STRUCTURES

IF7.1

2021-06-01

PREAI

Todoroki, Akira; Oasada, Tatsuki; Ueda, Masahito; Matsuzaki, Ryosuke; Hirano, Yoshiyasu

Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite 3d打印连续碳纤维复合材料弯曲截面的抗压强度退化

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2021-03-01

PREAI

Shiratori, Hirohide; Todoroki, Akira; Ueda, Masahito; Matsuzaki, Ryosuke; Hirano, Yoshiyasu

Optimization of curvilinear fiber orientation of composite plates and its experimental validation

COMPOSITE STRUCTURES

IF7.1

2021-01-01

PREAI

Matsuzaki, Ryosuke; Mitsui, Kenta; Hirano, Yoshiyasu; Todoroki, Akira; Suzuki, Yoshiro

3D compaction printing of a continuous carbon fiber reinforced thermoplastic 连续碳纤维增强热塑性塑料的3D压实打印

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2020-10-01

120

PREAI

Ueda, Masahito; Kishimoto, Shun; Yamawaki, Masao; Matsuzaki, Ryosuke; Todoroki, Akira; Hirano, Yoshiyasu; Le Duigou, Antoine

Experimental and analytical validation of mode II fracture toughness tests for a type of double-lap joint

COMPOSITE STRUCTURES

IF7.1

2020-02-01

PREAI

Oshima, Sota; Yoshimura, Akinori; Yahiro, Shigeki; Hirano, Yoshiyasu; Ogasawara, Toshio

Damage behavior of CFRP subjected to simulated lightning current under air, reduced-pressure air, and N2 environments

COMPOSITE STRUCTURES

IF7.1

2019-12-01

PREAI

Kamiyama, Shintaro; Hirano, Yoshiyasu; Okada, Takao; Sawaki, Koji; Sonehara, Takeo; Ogasawara, Toshio

In-situ observation of microscopic damage in adhesively bonded CFRP joints under mode I and mode II loading

COMPOSITE STRUCTURES

IF7.1

2019-11-01

PREAI

Oshima, Sota; Yoshimura, Akinori; Hirano, Yoshiyasu; Ogasawara, Toshio; Tan, Kwek-Tze

Effects of Set Curvature and Fiber Bundle Size on the Printed Radius of Curvature by a Continuous Carbon Fiber Composite 3D Printer 设定曲率和纤维束尺寸对连续碳纤维复合材料3D打印机打印曲率半径的影响

ADDITIVE MANUFACTURING

IF11.1

2018-12-01

PREAI

Matsuzaki, Ryosuke; Nakamura, Taishi; Sugiyama, Kentaro; Ueda, Masahito; Todoroki, Akira; Hirano, Yoshiyasu; Yamagata, Yusuke

3D printing of discontinuous and continuous fibre composites using stereolithography 使用立体光刻技术对不连续和连续纤维复合材料进行3D打印

ADDITIVE MANUFACTURING

IF11.1

2018-12-01

131

PREAI

Sano, Yukako; Matsuzaki, Ryosuke; Ueda, Masahito; Todoroki, Akira; Hirano, Yoshiyasu

Effect of through-thickness electrical conductivity of CFRPs on lightning strike damages

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-11-01

PREAI

Kumar, Vipin; Yokozeki, Tomohiro; Okada, Takao; Hirano, Yoshiyasu; Goto, Teruya; Takahashi, Tatsuhiro; Ogasawara, Toshio

3D printing of composite sandwich structures using continuous carbon fiber and fiber tension 使用连续碳纤维和纤维张力的复合材料夹层结构的3D打印

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-10-01

229

PREAI

Sugiyama, Kentaro; Matsuzaki, Ryosuke; Ueda, Masahito; Todoroki, Akira; Hirano, Yoshiyasu

Experimental method for mode I fracture toughness of composite laminates using wedge loaded double cantilever beam specimens

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-09-01

PREAI

Oshima, Sota; Yoshimura, Akinori; Hirano, Yoshiyasu; Ogasawara, Toshio

研究方向