Kamran A. Khan - Publications, H-index & Citations

Kamran A. Khan

khalifa university of science & technology

38H指数

239论文数

5.3K被引数

收录论文 98

发表时间

Harnessing buckling to design lightweight buckling-resilient plate-hybrid lattice structures 利用屈曲设计轻质抗屈曲板-混合晶格结构

International Journal of Lightweight Materials and Manufacture

IF0

2026-05-01

PREAI

Khan, M. K. A.; Cantwell, W. J.; Khan, K. A.

Processing Control of Geometric Fidelity in LPBF-Fabricated TPMS Lattices: The Critical Role of Laser Beam Offset LPBF制备的TPMS多孔结构的几何保真度加工控制：激光束偏移的关键作用

Additive Manufacturing

IF11.1

2026-04-22

OAAI

Ibrahim H. ZainElabdeen; Mohamed Abdelmageed; Tareq Farrah; Rehan Umer; Wesley J. Cantwell; Kamran A. Khan

Energy Absorption Performance of 3D and 4D Printed Multi-material Origami-Inspired Polyhedral Sandwich Structures under Compression and Impact Loads 3D和4D打印的多材料仿折纸多面体夹层结构在压缩和冲击载荷下的能量吸收性能

Polymer Testing

IF6

2026-04-17

OAAI

Khawlah Alabdouli; Wesley Cantwell; Sean Swei; Kamran A. Khan

Bioengineered heart valves for personalized therapy: advances in manufacturing and clinical challenges 生物工程化心脏瓣膜用于个性化治疗：制造领域的进展与临床挑战

Frontiers in Bioengineering and Biotechnology

IF4.8

2026-01-15

OAAI

Mahnoor Saeed; Kamran A. Khan

Thermo-Mechanical Piezoresistive Behavior of UD Multifunctional Composite Laminates for Next Generation Aircraft Structures 下一代飞机结构用单向多功能复合材料层合板的 thermo-mechanical piezoresistive 行为

REPAIR AND MULTIFUNCTIONAL APPLICATIONS, VOL 4

IF0

2026-01-01

PREAI

Alzarooni, Sara; Alahmed, Noora; Umer, Rehan; Khan, Kamran

In-Plane Mechanical and Piezoresistive Properties of Unidirectional Multifunctional Composites 单向多功能复合材料的面内力学和压阻性能

REPAIR AND MULTIFUNCTIONAL APPLICATIONS, VOL 4

IF0

2026-01-01

PREAI

Alahmed, Noora; Din, Israr Ud; Umer, Rehan; Cantwell, Wesley; Khan, Kamran

Correction: Review of Recent Advances in Origami-Inspired Structures for Enhanced Energy Absorption: Trends and Engineering Applications 更正：受折纸启发的结构在增强能量吸收方面的最新进展综述：趋势与工程应用

Arabian Journal for Science and Engineering

IF2.9

2025-11-28

OAAI

Khaja Fayaz Hussain; W. J. Cantwell; Kamran A. Khan

Viscoelastic and thermo-mechanical piezoresistive behavior of reduced graphene oxide-coated glass fiber reinforced polymer-based sandwich structures under flexural loading 弯曲载荷下，还原氧化石墨烯涂层玻璃纤维增强聚合物基夹层结构的粘弹性及热-力压阻行为

JOURNAL OF SANDWICH STRUCTURES & MATERIALS

IF2.8

2025-11-18

PREAI

Noora Alahmed; Sara Alzarooni; Wesley J. Cantwell; Rehan Umer; Kamran A. Khan

Engineering multi-layered bio-inspired deep-sea sponge lattices for enhanced mechanical performance via additive manufacturing 通过增材制造工程化多层级仿生深海海绵网格，以增强机械性能。

JOURNAL OF SANDWICH STRUCTURES & MATERIALS

IF2.8

2025-10-31

OAAI

Ibrahim H. ZainElabdeen; Asha Viswanath; Kamran A. Khan

Two-Way Shape Memory Polymer Composite Gripper for Adaptive Robotic Applications 双向形状记忆聚合物复合材料夹持器，适用于自适应机器人应用

Advanced Materials Technologies

IF6.2

2025-10-30

OAAI

Aamna Hameed; Kamran Ahmed Khan

Effect of material ductility on the post buckling plateau and specific energy absorption of additively manufactured hybrid plate lattice structures 材料延展性对增材制造混合板状格子结构后屈曲平台及比吸能的影响

Progress in Additive Manufacturing

IF5.4

2025-09-30

PREAI

Yacob Medhin; Omar Waqas Saadi; Muhammad Khizer Ali Khan; Kamran A. Khan

Systematic numerical design of a supported FCC plate lattice with structural reinforcement and gradation for energy absorption 支撑型FCC板状点阵结构在结构增强和梯度化方面的系统数值设计及其能量吸收性能研究

Composite Structures

IF7.1

2025-09-18

OAAI

Mohamed Abdelmageed; Ibrahim H. ZainElabdeen; Kamran A. Khan; Wael Zaki; Wesley Cantwell

Harnessing nature's design: enhancing buckling strength in lattice structures inspired by Lychniscosida sponge 利用自然的设计：通过受Lychniscosida海绵启发的点阵结构增强屈曲强度

Virtual and Physical Prototyping

IF8.8

2025-08-28

OAAI

Omar Waqas Saadi; Wesley Cantwell; Kamran A. Khan

3D-printed hierarchical planar-based lattices enabled via interpenetrating curved crease origami tubes: Experiments and design optimization 通过互锁曲面折痕纸艺管件实现的3D打印分级平面基点阵：实验与设计优化

Composite Structures

IF7.1

2025-07-30

PREAI

Khaja Fayaz Hussain; WJ Cantwell; Kamran A. Khan

Performance evaluation of GNP-modified epoxy/carbon fiber composites after cryogenic thermal cycling for hydrogen storage applications 低温热循环后GNP改性环氧/碳纤维复合材料的性能评价及其在氢储存中的应用

International Journal of Hydrogen Energy

IF8.3

2025-07-22

OAAI

Jabir Ubaid; J. Jefferson Andrew; Wesley J. Cantwell; Kamran A. Khan; Prasad Potluri; Rehan Umer

Enhancing buckling resistance of strut lattice structures via three-dimensional topology optimization 通过三维拓扑优化增强杆件格构结构的屈曲稳定性

Journal of Computational Design and Engineering

IF6.1

2025-07-22

OAAI

Asha Viswanath; Wesley James Cantwell; Kamran Ahmed Khan

Thermo-viscoelastic characterization and modeling of a high-temperature stretchable film for foldable electronics applications 高温可拉伸薄膜的热粘弹性表征与建模及其在可折叠电子设备中的应用

International Journal of Engineering Science

IF5.7

2025-07-19

OAAI

Siddhesh S. Kulkarni; Israr Ud Din; Yarjan Abdul Samad; Kamran A. Khan

Review of Recent Advances in Origami-Inspired Structures for Enhanced Energy Absorption: Trends and Engineering Applications Recent Advances in Origami-Inspired Structures for Enhanced Energy Absorption的进展回顾：趋势与工程应用

international journal of engineering science

IF2.9

2025-07-09

PREAI

Khaja Fayaz Hussain; W. J. Cantwell; Kamran A. Khan

Microstructure and elevated temperature mechanical properties of bimetal part fabricated by laser powder bed fusion of AlSi10Mg on rolled AA6061-T651 激光粉末床熔融成型AlSi10Mg/轧制AA6061-T651双金属零件的微观结构与高温力学性能

Materials & Design

IF7.9

2025-07-03

OAAI

Ibrahim H. ZainElabdeen; Rehan Umer; Wesley J. Cantwell; James Weston; Kamran A. Khan

Origami-inspired self-sensing foldable composite structures: Experiments and modeling 受折纸启发的自感知可折叠复合材料结构：实验与建模

COMPOSITES PART C: OPEN ACCESS

IF7

2025-07-01

OAAI

Israr Ud Din; Adnan Ahmed; Kamran A. Khan

研究方向