未登录

袁

袁新建 (Xinjian Yuan)

chongqing university

H指数:25

被引数:1,732

个人简介

任职于重庆大学材料科学与工程学院，副教授。2004年毕业于重庆大学材料科学与工程专业，获学士学位；2006年获重庆大学材料加工工程专业硕士学位；2010年获韩国釜山国立大学材料工学博士学位。2010年9月至2012年8月任讲师，2012年9月起任副教授。指导的研究生中三人获评校优秀硕士学位论文、一人获评国家奖学金。2020、2017、2011年获评优秀共产党员，2019年获评优秀党务工作者，2017年获评校先进工作者。

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Dynamic failure analysis of Q690D high-strength steel welds: A modified Johnson–Cook model validated by experiments and FEM

Q690D高强钢焊缝的动态失效分析：基于实验和FEM验证的修正Johnson-Cook模型

Journal of Materials Research and Technology

IF6.6

2026-05-260

OAAI

Different interfacial layer states, microstructure evolution, and mechanical properties during aging treatment of two coatings fabricated by TIG surfacing and laser cladding

两种由TIG堆焊和激光熔覆制备的涂层在时效处理过程中的不同界面层状态、微观结构演变及力学性能

Materials Characterization

IF5.5

2025-11-300

PRE

Deterioration of properties in eutectic high-entropy alloy coatings via ultrahigh-speed laser cladding after aging treatment

时效处理后，通过超高速激光熔覆制备的共晶高熵合金涂层性能劣化

Journal of Alloys and Compounds

IF6.3

2025-09-230

PRE

Excellent friction properties of 19Al-24Cr-19Ti-37Ni-1Y eutectic high-entropy alloy cladding prepared on Inconel 617 through plasma cladding

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-03-010

PRE

Comparison of the microstructure and properties of 19Al-24Cr-19Ti-37Ni-1Y high-entropy alloy fabricated through conventional and ultrahigh-speed laser cladding methods

APPLIED SURFACE SCIENCE

IF6.9

2024-10-012

PRE

Improved microstructure and wear resistance of (CoCrNi)82Al9Ti9 cladding layers via extreme high-speed laser cladding

通过极高速激光熔覆改善 (CoCrNi)82Al9Ti9熔覆层的组织和耐磨性

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-10-014

PRE

Microstructure evolution and oxidation mechanism of TA5 titanium alloy during high-temperature heat treatment

IF3.9

2024-09-015

PRE

Cracking mechanisms and microstructure of Co-based surfacing layer during high-temperature impact fatigue

MATERIALS CHARACTERIZATION

IF5.5

2024-08-010

PRE

Multi-pass butt welding of thick TA5 titanium-alloy plates by MIG: Microstructure and properties

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-06-014

PRE

A eutectic high-entropy alloy coating of novel hard-surface and soft-core structure with improved tribological properties

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-11-012

OAAI

Elucidating friction properties and strengthening mechanisms of Ni-based surfacing layer containing 9R phase

含9R相镍基堆焊层的摩擦性能及强化机制

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-09-016

PRE

Novel eutectic high-entropy alloy surfacing of flower-pot structure with outstanding wear resistance manufactured by laser cladding

SURFACES AND INTERFACES

IF6.3

2023-08-018

PRE

Transformation of carbides and mechanisms for cracking in Co-based alloy surfacing layer during thermal fatigue

MATERIALS CHARACTERIZATION

IF5.5

2023-07-016

PRE

Influence of the fast pulse loading at high temperature on cracking, microstructure, and mechanical property of the Stellite 6 surfacing by laser

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-05-012

OAAI

Cracking mechanisms and prevention of Stellite 6# surface layer built by laser cladding during thermal cyclic process

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2023-03-0114

PRE

Atom-scale characterization and 2D/3D modeling of carbides and Fe-Co phases in Stellite 6 laser clad coating after aging treatment

MATERIALS CHARACTERIZATION

IF5.5

2023-02-015

PRE

The study of microstructure, corrosion resistance and mechanical properties of ultrasonic assisted welding-brazing of Ti-Mg

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2022-03-018

OAAI

Transient liquid phase bonding of Inconel 625 with Mar-M247 superalloy using Ni-Cr-B interlayer: Microstructure and mechanical properties

使用3月中间层的Inconel 625与ni-cr-b高温合金的瞬时液相结合: 微观结构和力学性能

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-01-0122

PRE

Formation Mechanisms for (Cr,Co)7C3/(Cr,Co)23C6 Heterogeneous Precipitates and Stacking Faults Around Carbides in Surfacing Welding of Stellite Alloy on Stainless Steel

METALS AND MATERIALS INTERNATIONAL

IF4

2021-09-147

PRE

Effect of axial magnetic field on TIG welding-brazing of AA6061 aluminum alloy to HSLA350 steel

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-05-0129

OAAI