Laura Paglia

Sapienza University of Rome

H指数:16

被引数:611

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Effect of thermal treatment with different temperature-duration schedules on mechanical, tribological and corrosion properties of electroless Ni-P-ZrO₂ nanocomposite coatings

不同温度-时间制度热处理对化学镀Ni-P-ZrO<sub>2</sub>纳米复合涂层力学、摩擦学和腐蚀性能的影响

Surfaces and Interfaces

IF6.3

2026-09-290

OAAI

Enhancing copper processability via carbon nanotubes reinforcement in Powder Bed Fusion - Laser Based: Dragon Copper

通过碳纳米管增强粉末床熔融激光增材制造工艺中铜的可加工性：Dragon Copper

Materials Today Communications

IF4.5

2025-12-260

OAAI

Scandium and Yttrium/Ytterbium Disilicates as Environmental Barrier Coatings: Microstructural Characterization and High-Temperature Water Vapor Exposure Tests

钪和钇/镱二硅酸盐作为环境屏障涂层：微观结构表征及高温水蒸气暴露试验

Journal of Thermal Spray Technology

IF3.3

2025-11-210

OAAI

Deposition of high-velocity oxygen-fuel (HVOF) coatings on laser-powder bed fused (L-PBF) parts subjected to in-situ laser remelting treatments

高能氧燃料（HVOF）涂层在经过原位激光重熔处理的激光粉末床熔融（L-PBF）部件上的沉积

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-06-050

Influence of microstructural parameters on thermal cycling behavior of DVC-TBC systems

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-03-010

OAAI

Micro and nanostructured carbon-phenolic ablators modified by PVP addition

MATERIALS & DESIGN

IF7.9

2024-06-013

OAAI

Microstructural, mechanical and corrosion characterization of electroless Ni-P composite coatings modified with ZrO2 reinforcing nanoparticles

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-11-0115

OAAI

Physical-Chemical Characterization of Different Carbon-Based Sorbents for Environmental Applications

MATERIALS

IF3.2

2022-10-1415

OAAI

Lignin-enriched waste hydrothermal liquefaction with ZVMs and metal-supported Al2O3 catalyst

BIOMASS & BIOENERGY

IF5.8

2022-10-0111

PRE

Pre-treatment of Selective Laser Melting (SLM) surfaces for thermal spray coating

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-07-015

PRE

Diffusion aluminide coating modified via electroless nickel plating for Ni-based superalloy protection

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-06-0117

PRE

Hydrotreating of oak wood bio-crude using heterogeneous hydrogen producer over Y zeolite catalyst synthesized from rice husk

ENERGY CONVERSION AND MANAGEMENT

IF10.9

2022-03-0111

PRE

Guaiacol hydrotreating with in-situ generated hydrogen over ni/ modified zeolite supports

RENEWABLE ENERGY

IF9.1

2022-01-0115

PRE

WC-Ti Coatings Deposited Via Cold Gas Spray and Modified by Laser and Furnace Heat Treatments

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2021-12-117

PRE

Thermochemical characterization of polybenzimidazole with and without nano-ZrO2 for ablative materials application

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2020-10-2813

OAAI

Unsupported Ni metal catalyst in hydrothermal liquefaction of oak wood: Effect of catalyst surface modification

SCIENCE OF THE TOTAL ENVIRONMENT

IF8

2020-03-0137

OAAI

Manufacturing, thermochemical characterization and ablative performance evaluation of carbon-phenolic ablative material with nano-Al2O3 addition

POLYMER DEGRADATION AND STABILITY

IF7.4

2019-11-0132

PREAI

Pure thick nickel coating obtained by electroless plating: Surface characterization and wetting properties

通过化学镀获得的纯厚镍涂层: 表面表征和润湿性能

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-01-0140

PREAI

Low density ablative materials modified by nanoparticles addition: Manufacturing and characterization

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-06-0151

PREAI

Carbon-phenolic ablative materials for re-entry space vehicles: plasma wind tunnel test and finite element modeling

MATERIALS & DESIGN

IF7.9

2016-01-0157

PREAI

Laura Paglia

个人简介

教育背景

工作经历

荣誉奖项

研究方向