logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mohammad Malekan

Louisiana State University System

18H指数
76论文数
1.0K被引数
收录论文 31
发表时间
logo
Defect-interaction-driven fatigue-life scatter in additively manufactured metals: a mechanistic framework缺陷相互作用驱动的增材制造金属疲劳寿命分散：一种机理框架
errEngineering Failure Analysis
IF5.7
err2026-07-01
err1
PREAI
errDastgerdi, Jairan Nafar; Serjouei, Ahmad; Malekan, Mohammad; Mohammadi, Bijan
err分享
err收藏
Entropy-based fatigue characterization of metal additive manufacturing: a study on SLM 316L stainless steel基于熵的金属增材制造疲劳表征：SLM 316L不锈钢的研究
errProgress in Additive Manufacturing
IF5.4
err2026-04-23
err0
errOAAI
errMichael Khonsari; Bijan Mohammadi; Mohammad Ali Amooie; Mohammad Malekan
err分享
err收藏
Ductile fracture modelling of L-PBF printed 316L stainless steel using computed tomography使用计算机断层扫描对L-PBF打印的316L不锈钢进行延性断裂建模
errInternational Journal of Solids and Structures
IF3.8
err2026-02-26
err0
errOAAI
errRasid Ahmed Yildiz; Mohammad Malekan
err分享
err收藏
Finite Element Analysis of Microstructural Evolution during Dry Machining of Additively Manufactured Ti6Al4V Alloy增材制造Ti6Al4V合金干式切削过程中微观结构演化的有限元分析
errJournal of Materials Engineering and Performance
IF2
err2026-01-01
err0
PREAI
errJafarian, Farshid; Fallah, Mohammad Meghdad; Bahrami, Mohsen; Malekan, Mohammad
err分享
err收藏
Neural network-based prediction of plastic strain-hardening in metal additive manufacturing基于神经网络的金属增材制造中塑性应变硬化的预测
errComputational Mechanics
IF3.8
err2025-12-22
err0
PREAI
errAmirhossein N. Dorostkar; Rasid Ahmed Yildiz; Mohammad Malekan
err分享
err收藏
Influence of heat treatment on microstructure and mixed-mode fracture behaviour of additively manufactured 316L stainless steel热处理对增材制造316L不锈钢微观结构和混合模式断裂行为的影响
errEuropean Journal of Mechanics - A/Solids
IF0
err2025-11-21
err0
errOAAI
errCansin Ozdogan; Rasid A. Yildiz; Luciana Tavares; Ozkan Gokcekaya; Mohammad Malekan
err分享
err收藏
A holistic analysis of laser powder bed fusion process parameters for Inconel 625 superalloy: microstructural features and mechanical performance对Inconel 625超级合金激光粉末床熔融工艺参数的全面分析：微观结构特征与力学性能
errProgress in Additive Manufacturing
IF5.4
err2025-10-15
err0
errOAAI
errRasid Ahmed Yildiz; Ozkan Gokcekaya; Mohammad Malekan
err分享
err收藏
Evaluating porosity differences in wrought and additively manufactured 316L stainless steel: a tensile deformation study via high-resolution X-ray nanotomography评估热轧和增材制造316L不锈钢孔隙率差异：一项通过高分辨率X射线纳米断层扫描进行的拉伸变形研究
errJournal of Materials Science
IF3.9
err2025-07-30
err0
errOAAI
errRasid Ahmed Yildiz; Fatemeh Sadat Mirsafi; Till Leißner; Mohammad Malekan
err分享
err收藏
Numerical investigation of pre-flawed FGM tubes repaired with different composite jackets under sequential gaseous detonation loading
errRESULTS IN ENGINEERING
IF7.9
err2024-12-01
err1
errOAAI
errMalekan, Mohammad; Cimini Jr, Carlos A.
err分享
err收藏
Investigating temperature, stress, and residual stresses in laser powder bed fusion additive manufacturing of Inconel 625研究Inconel 625的激光粉末床熔融增材制造中的温度，应力和残余应力
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2024-12-01
err2
errOAAI
errGhasemi, Ali; Yildiz, Rasid Ahmed; Malekan, Mohammad
err分享
err收藏
Numerical analysis of machinability and surface alterations in cryogenic machining of additively manufactured Ti6Al4V alloy
errSIMULATION MODELLING PRACTICE AND THEORY
IF4.6
err2024-07-01
err0
errOAAI
errJafarian, Farshid; Bahrami, Mohsen; Fallah, Mohammad Meghdad; Malekan, Mohammad
err分享
err收藏
On the effect of small laser spot size on the mechanical behaviour of 316L stainless steel fabricated by L-PBF additive manufacturing小激光光斑尺寸对l-pbf增材制造316L不锈钢力学性能的影响
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2024-03-01
err8
errOAAI
errYildiz, Rasid Ahmed; Popa, Andrei-Alexandru; Malekan, Mohammad
err分享
err收藏
Fatigue behavior of Ti-6Al-4 V alloy manufactured by cold metal fusion
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2023-12-14
err1
errOAAI
errKaschube, Deborah; Pawlowitz, Tobias; Solterbeck, Claus-Henning; Schloesser, Jana; Malekan, Mohammad; Bohlmann, Berend
err分享
err收藏
Fracture loads of sharp and blunt asperities under normal and tangential loading
errTRIBOLOGY INTERNATIONAL
IF6.9
err2023-01-01
err1
errOAAI
errMalekan, Mohammad
err分享
err收藏
Control-oriented dynamic modeling and thermodynamic analysis of solid oxide electrolysis system
errENERGY CONVERSION AND MANAGEMENT
IF10.9
err2022-11-01
err20
PREAI
errYin, Ruilin; Sun, Li; Khosravi, Ali; Malekan, Mohammad; Shi, Yixiang
err分享
err收藏
Fracture analyses of surface asperities during sliding contact滑动接触过程中表面粗糙的断裂分析
errTRIBOLOGY INTERNATIONAL
IF6.9
err2021-07-01
err7
PREAI
errMalekan, Mohammad; Budzik, Michal K.; Jensen, Henrik M.; Aghababaei, Ramin
err分享
err收藏
An Abaqus plug-in to simulate fatigue crack growth
errENGINEERING WITH COMPUTERS
IF4.9
err2021-02-18
err11
PREAI
errMalekan, Mohammad; Khosravi, Ali; St-Pierre, Luc
err分享
err收藏
Modeling and energy analysis of a linear concentrating photovoltaic system cooled by two-phase mechanical pumped loop system
errRENEWABLE ENERGY
IF9.1
err2020-09-01
err16
PREAI
errPabon, Juan J. G.; Khosravi, Ali; Malekan, M.; Sandoval, Oscar R.
err分享
err收藏
Design parameter modelling of solar power tower system using adaptive neuro-fuzzy inference system optimized with a combination of genetic algorithm and teaching learning-based optimization algorithm
errJOURNAL OF CLEANER PRODUCTION
IF10
err2020-01-01
err38
errOAAI
errKhosravi, A.; Malekan, M.; Pabon, J. J. G.; Zhao, X.; Assad, M. E. H.
err分享
err收藏
Heat transfer modeling of a parabolic trough solar collector with working fluid of Fe3O4 and CuO/Therminol 66 nanofluids under magnetic field
errAPPLIED THERMAL ENGINEERING
IF6.9
err2019-12-01
err72
PREAI
errMalekan, Mohammad; Khosravi, Ali; Syri, Sanna
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
Y
Yixiang Shi
H 指数: 47 · 论文数: 379
M
Mamdouh El Haj Assad
H 指数: 46 · 论文数: 312
孙
孙立 (Li Sun)
H 指数: 43 · 论文数: 463
S
Sanna Syri
H 指数: 42 · 论文数: 220
X
Xiaowei Zhao
H 指数: 40 · 论文数: 316
查看更多