logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Salman Pervaiz

rochester institute of technology - dubai

27H指数
143论文数
2.6K被引数
收录论文 41
发表时间
logo
Optimizing Charpy Impact Strength of Material-Extruded PLA Through Layer Height, Raster Angle, and Infill Geometry通过层高、栅格角度和填充几何形状优化材料挤出PLA的夏比冲击强度
errJournal of Applied Polymer Science
IF2.8
err2026-09-25
err0
errOAAI
errYazan Mashaki; Luis Hoi Fan; Shafahat Ali; Salman Pervaiz; Ibrahim Deiab
err分享
err收藏
Structural Integrity Assessment of Stainless Steel Fabricated by GMAW-Assisted Wire Arc Additive ManufacturingJohn, J.S.; Pervaiz, S. 采用GMAW辅助丝材电弧增材制造的不锈钢结构完整性评估. Technologies 2025, 13, 392. [Google Scholar] [CrossRef]
errTechnologies
IF3.6
err2026-03-03
err0
errOAAI
errJoel Sam John; Salman Pervaiz
err分享
err收藏
Experimental and computational investigation of the thermo-mechanical response of PLA-APHA blend: A comparative study using FDM schemes and FEAPLA-APHA共混物的热-机械响应的实验与计算研究：基于FDM方案和FEA的对比研究
errSimulation Modelling Practice and Theory
IF4.6
err2026-02-18
err0
errOAAI
errShafahat Ali; AK Mohamed Farmaan; Ibrahim Deiab; Salman Pervaiz
err分享
err收藏
Optimization of 3D printed PLA triply periodic minimal surface (TPMS) structures and printing parameters using desirability function analysis采用期望函数分析法优化3D打印PLA三重周期性最小表面积(TPMS)结构和打印参数
errJournal of the Brazilian Society of Mechanical Sciences and Engineering
IF2.1
err2026-02-11
err0
PREAI
errVijay, Shriya; Atout, Yazan; Pervaiz, Salman
err分享
err收藏
Foundations for Future Prosthetics: Combining Rheology, 3D Printing, and Sensors未来假肢的基础：结合流变学、3D打印和传感器
errJournal of Manufacturing and Materials Processing
IF3.3
err2026-01-09
err0
errOAAI
errSalman Pervaiz; Krittika Goyal; Jun Han Bae; Ahasan Habib
err分享
err收藏
Optimizing 3D printing parameters for enhanced compression behavior in chiral-core PLA sandwich structures优化3D打印参数以增强手性核PLA夹层结构的压缩性能
errCellular Polymers
IF1.9
err2026-01-01
err0
PREAI
errAlramadan, Omar Mishall; Pervaiz, Salman
err分享
err收藏
Investigation of shape memory recovery in thermally activated PLA-TPU blends using fused granular fabrication (FGF)使用熔融颗粒成型（FGF）研究热激活PLA-TPU共混物的形状记忆恢复
errProgress in Additive Manufacturing
IF5.4
err2025-12-16
err0
PREAI
errDeepak Haresh Devjani; Wael Abdel Samad; Salman Pervaiz
err分享
err收藏
Towards a Low-Carbon Future: Evaluating 3D Printing’s Alignment with Sustainable Development Goal 13迈向低碳未来：评估3D打印与可持续发展目标13的契合度
errSustainability 2025, Vol. 17, Page 8837
IF3.3
err2025-10-02
err0
errOAAI
errJoel Sam John; Salman Pervaiz
err分享
err收藏
Dual-Stimuli Responsive and Sustainable PLA/APHA/TPU Blend for 4D Printing双刺激响应及可持续的PLA/APHA/TPU共混物用于4D打印
errMacromolecular Rapid Communications
IF4.3
err2025-08-14
err0
PREAI
errShafahat Ali; Mamoun Alshihabi; Logan Beard; Ibrahim Deiab; Salman Pervaiz
err分享
err收藏
A comprehensive evaluation of tool wear progression and built-up layer formation in sustainable dry machining of AZ61 magnesium alloyAZ61镁合金可持续干式切削中工具磨损进展和 Built-up layer 形成的综合评估
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2025-05-18
err0
PREAI
errAlshibi, Assem; Pervaiz, Salman; Khan, Aqib Mashood; Khan, Ahmar; Jamil, Muhammad
err分享
err收藏
Advanced Machine Learning Approaches for Predicting Machining Performance in Orthogonal Cutting Process用于预测正交切削过程中加工性能的先进机器学习方法
errLUBRICANTS
IF2.9
err2025-02-13
err0
errOAAI
errAl Bukhari, Sabrina; Pervaiz, Salman
err分享
err收藏
Development of sustainable polymer composite with agro-industrial residue for biomedical applications
errPOLYMER ENGINEERING AND SCIENCE
IF3.2
err2025-02-12
err0
errOAAI
errAli, Shafahat; Deiab, Ibrahim; Pervaiz, Salman; Eltaggaz, Abdelkrem
err分享
err收藏
A novel finite element model for thermally induced machining of Ti6Al4V
errSIMULATION MODELLING PRACTICE AND THEORY
IF4.6
err2024-07-01
err3
PREAI
errMustafa, Mohammed; Pervaiz, Salman; Deiab, Ibrahim
err分享
err收藏
Integrated optimization scheme for 3D printing of PLA-APHA biodegradable blendsPla-apha生物可降解共混物3D打印的集成优化方案
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-05-31
err8
PREAI
errAli, Shafahat; Nouzil, Ibrahim; Mehra, Vijayant; Eltaggaz, Abdelkrem; Deiab, Ibrahim; Pervaiz, Salman
err分享
err收藏
Optimization of infill density, fiber angle, carbon fiber layer position in 3D printed continuous carbon-fiber reinforced nylon composite
errRESULTS IN ENGINEERING
IF7.9
err2024-03-01
err11
errOAAI
errEl Essawi, Basim; Abdallah, Said; Ali, Shafahat; Mohammed, Abdallah Nassir Abdo; Susantyoko, Rahmat Agung; Pervaiz, Salman
err分享
err收藏
Experimental and numerical investigation of cooling effectiveness of nano minimum quantity lubrication
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-12-01
err7
PREAI
errNouzil, Ibrahim; Drummond, Matthew; Eltaggaz, Abdelkrem; Deiab, Ibrahim; Pervaiz, Salman
err分享
err收藏
Numerical CFD-FEM model for machining titanium Ti-6Al-4V with nano minimum quantity lubrication: A step towards digital twin
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-03-01
err7
PREAI
errNouzil, Ibrahim; Eltaggaz, Abdelkrem; Deiab, Ibrahim; Pervaiz, Salman
err分享
err收藏
Sustainable Vegetable Oil-Based Minimum Quantity Lubrication Assisted Machining of AZ91 Magnesium Alloy: A Grey Relational Analysis-Based Study
errLUBRICANTS
IF2.9
err2023-02-12
err7
errOAAI
errAlshibi, Assem; Nasreldin, Abdelrahman; Pervaiz, Salman
err分享
err收藏
Computational Analysis of Machining Induced Stress Distribution during Dry and Cryogenic Orthogonal Cutting of 7075 Aluminium Closed Cell Syntactic Foams
errMICROMACHINES
IF3
err2023-01-10
err2
errOAAI
errThomas, Kevin K.; Kannan, Sathish; Pervaiz, Salman; Nazzal, Mohammad; Karthikeyan, Ramanujam
err分享
err收藏
Optimization of 3D printed polylactic acid structures with different infill patterns using Taguchi-grey relational analysis
errADVANCED INDUSTRIAL AND ENGINEERING POLYMER RESEARCH
IF12
err2023-01-01
err31
errOAAI
errJohn, Joel; Devjani, Deepak; Ali, Shafahat; Abdallah, Said; Pervaiz, Salman
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
H
Hossam A. Kishawy
H 指数: 46 · 论文数: 197
A
Aqib Mashood Khan
H 指数: 40 · 论文数: 182
S
Shafiq Ahmad
H 指数: 35 · 论文数: 261
I
Ibrahim Deiab
H 指数: 30 · 论文数: 135
M
Muhammad P. Jahan
H 指数: 28 · 论文数: 157
查看更多