logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
C

Carsten Heinzel

university of bremen and mapex center for materials and processes

23H指数
86论文数
1.9K被引数
收录论文 29
发表时间
logo
Surface Integrity and Subsurface Modification Depths During Grinding Under Varying Process Conditions在不同工艺条件下磨削过程中的表面完整性及亚表面改性深度
errMetals
IF2.5
err2026-07-11
err0
errOAAI
errGerrit Kuhlmann; Lars Langenhorst; Tobias Hüsemann; Carsten Heinzel; Bernhard Karpuschewski
err分享
err收藏
Analytical and experimental investigation of subsurface characteristics and their depth-dependent modifications in grinding of case-hardened steel渗碳钢磨削过程中亚表面特性及其深度依赖性变化的解析与实验研究
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2026-06-16
err0
errOAAI
errGerrit Kuhlmann; Lars Langenhorst; Martin Hunkel; Tobias Hüsemann; Carsten Heinzel
err分享
err收藏
Comprehensive study of grinding burn limit and subsurface modifications in grinding with CBN and corundum abrasivesCBN和刚玉磨料磨削中磨削烧伤极限及亚表面改性的综合研究
errCIRP Journal of Manufacturing Science and Technology
IF5.4
err2025-11-08
err0
errOAAI
errGerrit Kuhlmann; Nikolai Guba; Tobias Hüsemann; Carsten Heinzel
err分享
err收藏
Consideration of thermally induced material modification depth for grinding process cycle design考虑热致材料改性深度对磨削工艺循环设计的影响
errCIRP Annals
IF0
err2025-04-29
err0
errOAAI
errGerrit Kuhlmann; Lars Langenhorst; Tobias Hüsemann; Carsten Heinzel
err分享
err收藏
Effect of alloy-specific fi c case-hardening layers on the grindability of gears
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2024-01-01
err0
errOAAI
errSemann, Tobias Huesemann; Guba, Nikolai; Surm, Holger; Heinzel, Carsten
err分享
err收藏
Utilisation Potential of Mechanical Material Loads during Grinding by Means of a Novel Tool Concept
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2023-09-13
err0
errOAAI
errEich, Marco; Meyer, Daniel; Heinzel, Carsten
err分享
err收藏
Partitioning of primary shear zone heat in face milling
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2022-01-01
err0
PREAI
errLangenhorst, L.; Soelter, J.; Heinzel, C.
err分享
err收藏
Evaluation of Hardness and Residual Stress Changes of AISI 4140 Steel Due to Thermal Load during Surface Grinding表面磨削过程中由于热负荷引起的AISI 4140钢的硬度和残余应力变化的评估
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2021-07-05
err7
errOAAI
errKohls, Ewald; Heinzel, Carsten; Eich, Marco
err分享
err收藏
Influence of Subsequently Applied Mechanical and Thermal Loads on Surfaces Ground with Mechanical Main Impact
errMATERIALS
IF3.2
err2021-05-04
err5
errOAAI
errStrunk, Rebecca; Borchers, Florian; Clausen, Brigitte; Heinzel, Carsten
err分享
err收藏
Comprehensive analysis of the thermal impact and its depth effect in grinding磨削热冲击及其深度效应的综合分析
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2021-01-01
err18
PREAI
errHeinzel, C.; Heinzel, J.; Guba, N.; Huesemann, T.
err分享
err收藏
Interactions of grinding tool and supplied fluid
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2020-01-01
err22
PREAI
errHeinzel, C.; Kirsch, B.; Meyer, D.; Webster, J.
err分享
err收藏
The Impact of fluid supply on energy efficiency and process performance in grinding
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2019-01-01
err18
PREAI
errHeinzel, C.; Kolkwitz, B.
err分享
err收藏
Surface layer modification charts for gear grinding
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2018-01-01
err20
PREAI
errJermolajev, Stepan; Brinksmeier, Ekkard; Heinzel, Carsten
err分享
err收藏
An analytical multilayer source stress approach for the modelling of material modifications in machining
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2017-01-01
err6
PREAI
errHeinzel, Carsten; Soelter, Jens; Gulpak, Maxim; Riemer, Oltmann
err分享
err收藏
Steel integrated thin film sensors for characterizing grinding processes
errSENSORS AND ACTUATORS A-PHYSICAL
IF4.9
err2016-05-01
err9
PREAI
errDumstorff, Gerrit; Sarma, Mridusmita; Reimers, Marcel; Kolkwitz, Benjamin; Brinksmeier, Ekkard; Heinzel, Carsten; Lang, Walter
err分享
err收藏
Advanced approach for a demand-oriented fluid supply in grinding
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2015-01-01
err31
errOAAI
errHeinzel, C.; Meyer, D.; Kolkwitz, B.; Eckebrecht, J.
err分享
err收藏
Systems for locally resolved measurements of physical loads in manufacturing processes
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2015-01-01
err12
PREAI
errTausendfreund, A.; Stoebener, D.; Dumstorff, G.; Sarma, M.; Heinzel, C.; Lang, W.; Goch, G.
err分享
err收藏
Reduction of oil and gas consumption in grinding technology using high pour-point lubricants
errJOURNAL OF CLEANER PRODUCTION
IF10
err2013-07-01
err24
PREAI
errGarcia, Eduardo; Pombo, Inigo; Antonio Sanchez, Jose; Ortega, Naiara; Izquierdo, Borja; Plaza, Soraya; Ignacio Marquinez, Jose; Heinzel, Carsten; Mourek, Daniel
err分享
err收藏
Fine finishing of gears with high shape accuracy
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2013-01-01
err27
PREAI
errHeinzel, C.; Wagner, A.
err分享
err收藏
Prevention of wheel clogging in creep feed grinding by efficient tool cleaning
errCIRP ANNALS-MANUFACTURING TECHNOLOGY
IF3.6
err2012-01-01
err30
PREAI
errHeinzel, C.; Antsupov, G.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
F
Fritz Klocke
H 指数: 66 · 论文数: 1.3K
E
E. Brinksmeier
H 指数: 51 · 论文数: 337
W
Walter Lang
H 指数: 47 · 论文数: 525
J
Jan C. Aurich
H 指数: 44 · 论文数: 679
E
Eckart Uhlmann
H 指数: 41 · 论文数: 667
查看更多