Soon-Jik Hong

Kongju National University

H指数:34

被引数:4,508

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

FGM-derived phase and property mapping for accelerated alloy design in additively manufactured high-entropy alloys

FGM衍生的相和性能映射在增材制造高熵合金加速合金设计中的应用

Intermetallics

IF4.8

2026-10-010

PRE

Build-orientation effects on microstructure and mechanical properties of electron-beam-welded dissimilar rolled/PBF Ti–6Al–4V joints

电子束焊接异质轧制/粉末床熔合Ti-6Al-4V接头中构建方向对微观结构和力学性能的影响

materials science and engineering: a

IF0

2026-04-160

PRE

Geometry-sensitive constitutive model for predicting the relative density evolution and anisotropic shrinkage of binder-jetted 17-4PH stainless steel during sintering

几何敏感本构模型用于预测喷墨粘结剂17-4PH不锈钢在烧结过程中的相对密度演变和各向异性收缩

materials science and engineering: a

IF0

2026-04-160

PRE

Influence of recycling-induced oxide inclusions on microstructure and mechanical properties of directed energy deposited 316L stainless steel

回收引起的氧化物夹杂对定向能量沉积316L不锈钢微观结构和力学性能的影响

materials science and engineering: a

IF0

2026-03-040

PRE

TiC nanoparticles tune phase stability and deformation mechanisms in directed energy deposition processed Fe60Co15Ni15Cr10 medium-entropy alloy composites

materials science and engineering: a

IF0

2026-01-270

PRE

Effect of Post-Processing Heat Treatment Temperature on Microstructural Evolution and Mechanical Properties of the Ti-6Al-2Sn-4Zr-2Mo Alloy Fabricated by Laser Powder Bed Fusion

激光粉末床熔融制备的Ti-6Al-2Sn-4Zr-2Mo合金在后处理热处理温度对其微观结构演变和力学性能的影响

Micromachines 2026, Vol. 17, Page 16

IF3

2025-12-250

OAAI

Assessing sustainability of Titanium powder recycling in additive manufacturing through the powder surface and microstructure analysis for porous implant coatings

通过粉末表面和微观结构分析评估增材制造中钛粉回收在多孔植入物涂层方面的可持续性

Journal of Materials Research and Technology

IF6.6

2025-12-080

OAAI

Entropy-guided design of thermoelectric properties in multi-component compounds

多组分化合物中热电性质的熵引导设计

Matter

IF17.5

2025-12-030

PRE

Development of high-quality Cr-Al targets for protective high temperature oxidation resistance coatings on Zr-based claddings

高纯Cr-Al靶材的开发，用于Zr基包壳上的高温抗氧化防护涂层

International Journal of Refractory Metals and Hard Materials

IF4.6

2025-11-250

PRE

Ceramic insert enabled build plate thermal isolation for enhanced microstructure and residual stress mitigation in laser-based powder bed fusion of metals

陶瓷衬垫实现了构建平台的隔热功能，以在基于激光的金属粉末床熔融过程中增强微观结构并缓解残余应力。

Additive Manufacturing

IF11.1

2025-09-160

PRE

Impact of powder size distribution on the flowability of gas-atomized Inconel 625 powder for directed energy deposition

粉末粒径分布对用于定向能量沉积的气雾化Inconel 625粉末流动性的影响

Materials Today Communications

IF4.5

2025-09-050

PRE

Influence of gas type on microstructure and characteristics of super duplex stainless steel alloy powders prepared via gas atomization

气态类型对通过气体雾化制备的超 duplex 不锈钢合金粉末的微观结构和特性的影响

Journal of Materials Research and Technology

IF6.6

2025-09-020

OAAI

Constitutive analysis, processing map, and dynamic recrystallization behavior of Al0.6CoCrFeNi high entropy alloy using hot compression tests

本征分析、加工图及Al0.6CoCrFeNi高熵合金在热压缩试验中的动态再结晶行为

MATERIALS SCIENCE AND TECHNOLOGY

IF2.2

2025-09-010

PRE

Reduction of thermal conductivity and improved mechanical properties by incorporating high-entropy carbides into p-type Bi0.5Sb1.5Te3 alloy

通过将高熵碳化物引入p型Bi₀.₅Sb₁.₅Te₃合金，降低热导率并改善机械性能

SOLID STATE COMMUNICATIONS

IF2.4

2025-09-010

PRE

Cellular structure assisted enhanced deformation-induced martensitic transformation in laser-directed energy deposited ferrous medium-entropy alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-02-010

PRE

Microstructure evolution and mechanical properties of CoCrFeMnNi HEA-MXene composites prepared by spark plasma sintering

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-011

PRE

Revealing the improved thermoelectric performances of (BiSb)2Te3 alloy through rapid solidification of cold-water assisted water atomization approach

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-011

PRE

Grain Size-Dependent Thermoelectric Performances of Al2O3 Addition into BiSbTe Alloy During Heat Treatment Fabricated by Mechanical Alloying

ADVANCED ENGINEERING MATERIALS

IF3.3

2024-10-101

Realizing high thermoelectric properties through the development of bimodal microstructures using water atomized p-type Bi0.5 Sb1.5 Te3 alloys

MATERIALS RESEARCH BULLETIN

IF5.7

2024-09-011

PRE

Predicting the thermoelectric figure of merit in p-type BiSbTe-based alloys using artificial neural network modeling

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-08-010

PRE

Soon-Jik Hong

个人简介

教育背景

工作经历

荣誉奖项

研究方向