F.M. Andrade Pires - Publications, H-index & Citations

F.M. Andrade Pires

Universidade do Porto

26H指数

200论文数

3.1K被引数

收录论文 80

发表时间

Combining second-order homogenisation and nonlocal damage for FE2 mesh-regularisation under moderate localisation 结合二阶均质化与非局部损伤进行中等局部化下的FE2网格正则化

COMPUTERS & STRUCTURES

IF4.8

2026-07-30

OAAI

Guilherme Fonseca Gonçalves; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires

A scalable composite Bayesian optimisation framework for material calibration using full-field measurements 基于全场测量的材料校准的可扩展复合贝叶斯优化框架

Computer Methods in Applied Mechanics and Engineering

IF7.3

2026-06-01

PREAI

Coelho, R. P. Cardoso; Alves, A. Francisca Carvalho; Pires, F. M. Andrade

Guest editorial: Computational modelling of multi-scale, multi-uncertainty and multi-physics problems 2024 客座编辑：多尺度、多不确定性及多物理场问题的计算建模 2024

ENGINEERING COMPUTATIONS

IF1.9

2025-11-25

PREAI

Andrade Pires, Francisco M.; Li, Chenfeng

Efficient and accurate multiscale modelling of TRIP steels: Advanced numerical strategies and experimental validation TRIP钢的高效与精确多尺度建模：先进数值策略与实验验证

Finite Elements in Analysis and Design

IF3.5

2025-11-20

OAAI

R.P. Cardoso Coelho; F.M. Andrade Pires

Multi-scale optimization of PC/ABS polymer blends: Microstructural design for superior toughness, strength, and weight efficiency PC/ABS聚合物合金的多尺度优化：微观结构设计以实现卓越的韧性、强度和轻量化效率

Finite Elements in Analysis and Design

IF3.5

2025-07-16

OAAI

A. Francisca Carvalho Alves; Bernardo P. Ferreira; F.M. Andrade Pires

Finite strain self-consistent clustering analysis under multiplicative kinematics 有限应变自洽聚类分析下的乘法运动学

Computers & Structures

IF4.8

2025-07-10

OAAI

Bernardo P. Ferreira; R.P. Cardoso Coelho; F.M. Andrade Pires; M.A. Bessa

Multiscale contact homogenisation through the method of multiscale virtual power: Computational implementation and numerical aspects 多尺度接触均质化：通过多尺度虚功方法——计算实现与数值方面

Computer Methods in Applied Mechanics and Engineering

IF7.3

2025-07-09

OAAI

António M. Couto Carneiro; Rodrigo Pinto Carvalho; Eduardo A. de Souza Neto; Francisco M. Andrade Pires

Analysis of a novel 3D-printed mechanical metamaterial with tension-induced undulation: Experimental and numerical investigations 一种具有张力诱导波动的新型3D打印机械超材料的分析与研究：实验与数值研究

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2025-07-01

PREAI

dos Santos, Wanderson F.; Rodrigues, Alina S. L.; Lopes, Igor A. Rodrigues; Pires, Francisco M. Andrade; Proenca, Sergio P. B.; Silveira, Zilda C.

Size effects in 3D-printed polymeric lattices under three-point bending: Manufacturing, testing, and modelling 3D打印聚合物格子材料在三点弯曲下的尺寸效应：制造、测试与建模

international journal of applied mechanics

IF0

2025-06-05

PREAI

Wanderson F. dos Santos; Alina S.L. Rodrigues; Igor A. Rodrigues Lopes; Francisco M. Andrade Pires; Sergio P.B. Proença; Zilda C. Silveira

A critical comparison of gradient and integral nonlocal damage models: Formulation, numerical predictions and computational aspects 梯度与积分型非局部损伤模型的批判性比较：公式化、数值预测和计算方面

FINITE ELEMENTS IN ANALYSIS AND DESIGN

IF3.5

2025-06-01

OAAI

Goncalves, Guilherme Fonseca; Lopes, Igor A. Rodrigues; Carneiro, Antonio M. Couto; Pires, Francisco M. Andrade

Effect of the temporal discretization of contact forces on dynamic contact simulations using singular non-standard quadrature rules for the mass matrix 使用奇异非标准积分规则对质量矩阵进行接触力时间离散化对动态接触模拟的影响

FINITE ELEMENTS IN ANALYSIS AND DESIGN

IF3.5

2025-06-01

OAAI

Rocha, Paulo Ricardo Ferreira; Carneiro, Antonio Manuel Couto; Pires, Francisco Manuel Andrade

A composite Bayesian optimisation framework for material and structural design

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2025-02-01

OAAI

Coelho, R. P. Cardoso; Alves, A. Francisca Carvalho; Pires, T. M. Nogueira; Pires, F. M. Andrade

Multiscale contact homogenisation: A novel perspective through the method of multiscale virtual power

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2024-12-01

OAAI

Carneiro, Antonio M. Couto; Pires, Francisco M. Andrade; de Souza Neto, Eduardo A.

Efficient constitutive parameter identification through optimisation-based techniques: A Comparative analysis and novel composite Bayesian optimisation strategy 通过基于优化的技术进行有效的本构参数识别: 比较分析和新颖的复合贝叶斯优化策略

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2024-07-01

OAAI

Coelho, R. P. Cardoso; Alves, A. Francisca Carvalho; Pires, F. M. Andrade

Exploring novel mechanical metamaterials: Unravelling deformation mode coupling and size effects through second-order computational homogenisation

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2024-04-01

OAAI

dos Santos, Wanderson F.; Lopes, Igor A. Rodrigues; Pires, Francisco M. Andrade; Proenca, Sergio P. B.

Multi-scale modelling and analysis of the behaviour of PC/ABS blends with emphasis on interfacial/bulk damage

FINITE ELEMENTS IN ANALYSIS AND DESIGN

IF3.5

2024-02-01

OAAI

Amaro, Alexandre D. C.; Alves, A. Francisca Carvalho; Pires, F. M. Andrade

A multi-scale formulation for polycrystalline materials accounting for cohesive micro-cracks: Homogenisation of the traction-separation law

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2023-12-01

OAAI

de Carvalho, M. Vieira; Lopes, I. A. Rodrigues; Pires, F. M. Andrade

A multi-scale model combining martensitic transformations with multi-phase crystallographic slip

COMPUTERS & STRUCTURES

IF4.8

2023-12-01

OAAI

Coelho, R. P. Cardoso; de Carvalho, M. Vieira; Pires, F. M. Andrade

Second-order multi-scale modelling of natural and architected materials in the presence of voids: Formulation and numerical implementation

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2023-11-01

OAAI

dos Santos, Wanderson F.; Lopes, Igor A. Rodrigues; Pires, Francisco M. Andrade; Proenca, Sergio P. B.

On the modeling of cavitation and yielding in rubber-toughened amorphous polymers: Fully implicit implementation and optimization-based calibration 关于橡胶增韧的非晶态聚合物中的空化和屈服建模: 完全隐式实现和基于优化的校准

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2023-11-01

OAAI

Alves, A. Francisca Carvalho; Ferreira, Bernardo P.; Pires, F. M. Andrade

研究方向