Kenta Goto - Publications, H-index & Citations

Kenta Goto

Yokohama National University

17H指数

86论文数

995被引数

收录论文 20

发表时间

High-throughput evaluation of stress-strain relationships in Ni-Co-Cr ternary systems via indentation testing of diffusion couples

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2022-07-01

OAAI

Goto, Kenta; Ikeda, Ayako; Osada, Toshio; Watanabe, Ikumu; Kawagishi, Kyoko; Ohmura, Takahito

Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone's elasto-plasticity and ceramics' intrinsic properties

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2021-10-01

OAAI

Ong, Fei Shen; Rheingans, Bastian; Goto, Kenta; Tobe, Hirobumi; Ohmura, Takahito; Janczak-Rusch, Jolanta; Sato, Eiichi

Transparent dynamic metasurface for a visually unaffected reconfigurable intelligent surface: controlling transmission/reflection and making a window into an RF lens

OPTICS EXPRESS

IF3.3

2021-08-26

OAAI

Kitayama, Daisuke; Hama, Yuto; Goto, Kenta; Miyachi, Kensuke; Motegi, Takeshi; Kagaya, Osamu

Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-06-01

PREAI

Ruzic, Jovana; Goto, Kenta; Watanabe, Ikumu; Osada, Toshio; Wu, Liberty; Ohmura, Takahito

High-throughput mapping method for mechanical properties, oxidation resistance, and phase stability in Ni-based superalloys using composition-graded unidirectional solidified alloys

SCRIPTA MATERIALIA

IF5.6

2021-03-01

PREAI

Ikeda, Ayako; Goto, Kenta; Osada, Toshio; Watanabe, Ikumu; Kawagishi, Kyoko

Mechanomics Biomarker for Cancer Cells Unidentifiable through Morphology and Elastic Modulus

NANO LETTERS

IF9.1

2021-01-21

PREAI

Wang, Hongxin; Zhang, Han; Da, Bo; Lu, Dabao; Tamura, Ryo; Goto, Kenta; Watanabe, Ikumu; Fujita, Daisuke; Hanagata, Nobutaka; Kano, Junko; Nakagawa, Tomoki; Noguchi, Masayuki

Microstructure-elastic property relationships in carbon fibers: A nanoindentation study

COMPOSITES PART B-ENGINEERING

IF14.2

2020-11-01

OAAI

Shirasu, Keiichi; Goto, Kenta; Naito, Kimiyoshi

Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation

MATERIALS & DESIGN

IF7.9

2020-09-01

OAAI

Goto, Kenta; Watanabe, Ikumu; Ohmura, Takahito

Analysis of preliminary local hardening close to the ferrite-martensite interface in dual-phase steel by a combination of finite element simulation and nanoindentation test

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2020-08-01

PREAI

Matsuno, Takashi; Ando, Reon; Yamashita, Norio; Yokota, Hideo; Goto, Kenta; Watanabe, Ikumu

Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

IF6.9

2020-07-22

OAAI

Watanabe, Ikumu; Sun, Zhengzhong; Kitano, Houichi; Goto, Kenta

Stress mapping reveals extrinsic toughening of brittle carbon fiber in polymer matrix

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

IF6.9

2020-05-12

OAAI

Wang, Hongxin; Zhang, Han; Goto, Kenta; Watanabe, Ikumu; Kitazawa, Hideaki; Kawai, Masamichi; Mamiya, Hiroaki; Fujita, Daisuke

Bottlebrush polymer-reinforced transparent multiphase plastics with enhanced thermal stability

CHEMICAL COMMUNICATIONS

IF4.2

2020-01-01

PREAI

Yamauchi, Yoshihiro; Samitsu, Sadaki; Goto, Kenta; Takeuchi, Masayuki

Suitability Evaluation of LaNi5 as Hydrogen-Storage-Alloy Actuator by In-Situ Displacement Measurement during Hydrogen Pressure Change

MOLECULES

IF4.6

2019-07-01

OAAI

Goto, Kenta; Hirata, Tomoyuki; Yamamoto, Isao; Nakao, Wataru

Deformation mechanism of capsule-type hydrogen-storage-alloy actuator

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2019-06-01

PREAI

Goto, Kenta; Hirata, Tomoyuki; Higuchi, Takehiro; Fuchiwaki, Ohmi; Ozaki, Shingo; Nakao, Wataru

Determining suitable parameters for inverse estimation of plastic properties based on indentation marks

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2019-05-01

PREAI

Goto, Kenta; Watanabe, Ikumu; Ohmura, Takahito

Stress dependence of indentation modulus for carbon fiber in polymer composite

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

IF6.9

2019-04-26

OAAI

Wang, Hongxin; Zhang, Han; Tang, Daiming; Goto, Kenta; Watanabe, Ikumu; Kitazawa, Hideaki; Kawai, Masamichi; Mamiya, Hiroaki; Fujita, Daisuke

Tangent modulus method - An original method to measure in-situ rock stress

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

IF7.4

2018-12-01

OAAI

Fujii, Y.; Makasi, M.; Kodama, J.; Fukuda, D.; Goto, K.; Kumakura, S.; Kanaoka, M.; Dassanayake, A. B. N.

Swelling response behavior of palladium during hydrogen absorption and discharge

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2018-06-01

PREAI

Goto, Kenta; Hirata, Tomoyuki; Yamamoto, Isao; Nakao, Wataru

Effect of diffusion coefficient variation on interrelation between hydrogen diffusion and induced internal stress in hydrogen storage alloys

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2017-01-01

PREAI

Goto, Kenta; Ozaki, Shingo; Nakao, Wataru

Formation and sintering of 75 mol% alumina 25 mol% zirconia (2-3.5 mol% yttria) composite powder prepared by the hydrazine method

JOURNAL OF MATERIALS SCIENCE

IF3.9

1996-01-01

PREAI

Goto, K; Hirota, K; Yamaguchi, O; Kume, H; Inamura, S; Miyamoto, H

研究方向