Depeng Shen

qilu university of technology (shandong academy of sciences)

11H指数

39论文数

382被引数

收录论文 28

发表时间

Single-solution-treated Fe60 laser cladding coatings for mold repair with sliding wear resistance against Si₃N₄ 单溶液处理的Fe60激光熔覆涂层，用于与Si₃N₄滑动磨损抗性模具修复

Wear

IF6.1

2026-08-26

PREAI

Xiaoning Pei; Guoqiang Liu; Yu Zhang; Jianqun He; Bingtao Tang; Fangxing Wu; Xiantao Song; Bin Li; Yuanmao Shi; Yong Zhao; Aihui Zhang; Depeng Shen

Role of Cu in strengthening and antibacterial function of TiZrNb-based medium-entropy alloys processed by cold rolling 冷轧处理TiZrNb基中熵合金中Cu的强化及抗菌功能作用

Intermetallics

IF4.8

2026-06-11

PREAI

Yelong An; Depeng Shen; Yu Zhang; Bingtao Tang; Dexiao Dong; Yakai Bai; Guoqiang Liu

Synergistic Enhancement of Strength and Ductility in Fe-0.23C-2.12Mn-1.63Si Steel via Pre-Quenching Prior to Quenching and Partitioning Treatment 通过淬火前预淬火增强Fe-0.23C-2.12Mn-1.63Si钢的强度和韧性协同提升（淬火及配分处理）

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

IF2.5

2026-06-01

PREAI

Sun, Shulei; Shen, Depeng; Wu, Fangxing; Han, Jiguang; Bruschi, Stefania; Tang, Bingtao

Cr Alloying Enhanced Strength–Ductility Synergy in TiZrNb Alloys at Intermediate Temperature: A Comparative Study with Al and Cu Cr合金化增强TiZrNb合金在中温下的强度-塑性协同作用：与Al和Cu的对比研究

Materials

IF3.2

2026-05-09

OAAI

Yelong An; Guoqiang Liu; Yu Zhang; Bingtao Tang; Yong Zhao; Aihui Zhang; Yakai Bai; Depeng Shen

Recent advances in Ti–Cu alloys: microstructural evolution, fabrication, and applications 近年来Ti–Cu合金的研究进展：微观结构演化、制备与应用

Journal of Materials Science

IF3.9

2026-04-19

PREAI

Yuanmao Shi; Depeng Shen; Fangxing Wu; Yu Zhang; Xiaoning Pei; Xianjun Sun; Guoqiang Liu

Synergistic enhancement of strength and ductility in Fe-Cr-Mn-Mo-Cu alloys via nanoscale Cu precipitation 通过纳米级Cu沉淀实现Fe-Cr-Mn-Mo-Cu合金的强度与韧性协同增强

materials science and engineering: a

IF0

2026-03-28

PREAI

Junnan Zhao; Bingtao Tang; Depeng Shen; Guoqiang Liu; Ning Guo; Jinhua He; Song Jin

Strength-Ductility Synergy and Corrosion Resistance in a Fe-2.8Mn-5.7Ni-0.3C Alloy via Dual-Step Heat Treatment

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

IF2.5

2025-10-01

PREAI

Bai, Yakai; Shen, Depeng; Zhang, Yu; Tang, Bingtao; An, Yelong; Liu, Guoqiang

Microstructural evolution and mechanical properties of Fe–Cr–Mo–Mn alloy under IQ and IQT heat treatments Fe–Cr–Mo–Mn合金在IQ和IQT热处理下的微观结构演变与力学性能

Journal of Materials Science

IF3.9

2025-09-26

PREAI

Depeng Shen; Cunchao Dou; Guoqiang Liu; Ning Guo; Fu Guo; Tianjiao Huang; Bingtao Tang

High-strength nanostructured copper alloys via mechanical consolidation of pure copper and Fe-Si-B glassy powers

VACUUM

IF3.9

2025-04-01

PREAI

Zhou, Hongbo; Jiang, Haihong; Yu, Li; Ding, Gan; Cai, Songlin; Shen, Depeng; Jiang, Minqiang; Wilde, Gerhard

Influence of stress state and dynamic recrystallization on fracture behavior in hot forming of Cr and Mo alloyed Fe-C-Mn steel 应力状态和动态再结晶对Cr和Mo合金化Fe-C-Mn钢热成形断裂行为的影响

ENGINEERING FAILURE ANALYSIS

IF5.7

2025-04-01

PREAI

Sun, Zhendong; Shen, Depeng; Sun, Wei; Tang, Bingtao

Effects of annealing and quenching temperature on microstructure evolution and mechanical properties in Fe-0.17C-2.10Mn-0.51Si steel 退火和淬火温度对Fe-0.17C-2.10Mn-0.51Si钢微观结构演变和力学性能的影响

MATERIALS & DESIGN

IF7.9

2025-01-01

OAAI

Yuan, Panpan; Shen, Depeng; Sun, Wei

Effect of High-Pressure Torsion Temperatures on the Precipitation and Properties of Cu-Cr Alloy

MATERIALS

IF3.2

2024-09-09

OAAI

Zhang, Yu; Shen, Depeng; Liu, Guoqiang; Tang, Bingtao

Determining the Hot Workability and Microstructural Evolution of an Fe-Cr-Mo-Mn Steel Using 3D Processing Maps

MATERIALS

IF3.2

2024-06-03

OAAI

Dou, Cunchao; Sun, Zhendong; Shen, Depeng; Guo, Ning; Liu, Zhe; Cheng, Lin; Liu, Yongchao; Tang, Bingtao

Influence of microstructure evolution on hot ductility behavior of a Cr and Mo alloyed Fe-C-Mn steel during hot deformation

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-06-01

PREAI

Sun, Zhendong; Shen, Depeng; Liu, Guoqiang; Guo, Ning; Guo, Fu; Zhang, Zhen; Sun, Wei; Tang, Bingtao

Transparent and Planar Cs3Cu2Cl5 Crystals for Micrometer-Resolution X-ray Imaging Screen

ACS APPLIED MATERIALS & INTERFACES

IF8.2

2024-01-18

PREAI

Xiang, Weijia; Shen, Depeng; Zhang, Xiangzhou; Li, Xiuling; Liu, Yeqi; Zhang, Yuhai

Evolution of microstructure and electrochemical corrosion behavior of CuZn-based alloys induced by cold rolling

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-11-01

OAAI

Gao, Pengfei; Ren, Yanshu; Qian, Siwen; He, Yuxing; Shen, Depeng

X-Ray imager of 26-μm resolution achieved by perovskite assembly 通过钙钛矿组装实现的26μm分辨率的x射线成像仪

NANO RESEARCH

IF9

2021-09-09

PREAI

Wang, Zhaofen; Sun, Ruijia; Liu, Nianqiao; Fan, Huailin; Hu, Xun; Shen, Depeng; Zhang, Yuhai; Liu, Hong

Performance-Enhanced CsPbBr3/HfO2/Si Heterostructure Optoelectronics through the Tunneling Effect

ADVANCED MATERIALS INTERFACES

IF4.4

2021-05-09

PREAI

Wang, Yanhao; Zheng, Wei; Ji, Hao; Shen, Depeng; Zhang, Yuhai; Han, Yingkuan; Gao, Jianwei; Qiang, Le; Liu, Hong; Han, Lin; Zhang, Yu

Effects of manganese on diffusion and wear behavior of ZTA particles reinforced iron matrix composites in vacuum

VACUUM

IF3.9

2020-07-01

PREAI

Li, Ping; Gao, Jing; Gong, Mengying; Shen, Depeng; Tong, Weiping

Improved tensile strength and electrical conductivity in Cu-Cr-Zr alloys by controlling the precipitation behavior through severe warm rolling 通过严格的温轧控制析出行为来提高cu-cr-zr合金的拉伸强度和电导率

JOURNAL OF MATERIALS SCIENCE

IF3.9

2020-05-26

PREAI

Shen, D. P.; Xu, N.; Gong, M. Y.; Li, P.; Zhou, H. B.; Tong, W. P.; Wilde, Gerhard

研究方向