Ding, Junhao - Publications & Citations

Ding, Junhao

Chinese University of Hong Kong

0H指数

29论文数

0被引数

收录论文 12

发表时间

Learning Based Toolpath Planner on Diverse Graphs for 3D Printing

ACM TRANSACTIONS ON GRAPHICS

IF9.5

2024-11-19

OAAI

Huang, Yuming; Guo, Yuhu; Su, Renbo; Han, Xingjian; Ding, Junhao; Zhang, Tianyu; Liu, Tao; Wang, Weiming; Fang, Guoxin; Song, Xu; Whiting, Emily; Wang, Charlie c l

Hierarchical triply periodic minimal surface shell lattices with superior isotropic elasticity: Design guidelines, fabrication, and validation 具有优异各向同性弹性的分层三重周期性最小表面壳晶格: 设计指南，制造和验证

ADDITIVE MANUFACTURING

IF11.1

2024-08-01

PREAI

Liu, Hui; Ma, Winston Wai Shing; Ding, Junhao; Qu, Shuo; Li, Rui; Ge, Qi; Wang, Michael Yu; Song, Xu

Full-composition-gradient in-situ alloying of Cu-Ni through laser powder bed fusion

ADDITIVE MANUFACTURING

IF11.1

2024-04-01

PREAI

Qu, Shuo; Gao, Shiming; Wang, Liqiang; Ding, Junhao; Lu, Yang; Wen, Yaojie; Qu, Xuanhui; Zhang, Baicheng; Song, Xu

Deep reinforcement learning based toolpath generation for thermal uniformity in laser powder bed fusion process 基于深度强化学习的激光粉末床熔融热均匀性刀具路径生成

ADDITIVE MANUFACTURING

IF11.1

2024-01-01

OAAI

Qin, Mian; Ding, Junhao; Qu, Shuo; Song, Xu; Wang, Charlie C. L.; Liao, Wei-Hsin

Adaptive toolpath generation for distortion reduction in laser powder bed fusion process 用于减少激光粉末床熔融过程中失真的自适应刀具路径生成

ADDITIVE MANUFACTURING

IF11.1

2023-02-01

OAAI

Qin, Mian; Qu, Shuo; Ding, Junhao; Song, Xu; Gao, Shiming; Wang, Charlie C. L.; Liao, Wei- Hsin

Development of conformal shell lattices via laser powder bed fusion and unraveling their mechanical responses via modeling and experiments 通过激光粉末床融合开发保形壳晶格，并通过建模和实验解开其机械响应

ADDITIVE MANUFACTURING

IF11.1

2023-01-01

PREAI

Fu, Jin; Ding, Junhao; Zhang, Lei; Qu, Shuo; Song, Xu; Fu, M. W.

Anisotropic material properties of pure copper with fine-grained microstructure fabricated by laser powder bed fusion process

ADDITIVE MANUFACTURING

IF11.1

2022-11-01

OAAI

Qu, Shuo; Ding, Junhao; Fu, Jin; Fu, Mingwang; Song, Xu

Design of elastically isotropic shell lattices from anisotropic constitutive materials for additive manufacturing 用于增材制造的各向异性本构材料的弹性各向同性壳晶格的设计

ADDITIVE MANUFACTURING

IF11.1

2022-11-01

PREAI

Zhang, Lei; Ma, Qingping; Ding, Junhao; Qu, Shuo; Fu, Jin; Fu, Ming Wang; Song, Xu; Wang, Michael Yu

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion 高精度激光粉床熔制薄壁网壳结构的几何偏差及补偿

ADDITIVE MANUFACTURING

IF11.1

2022-10-01

PREAI

Ding, Junhao; Qu, Shuo; Zhang, Lei; Wang, Michael Yu; Song, Xu

High-precision laser powder bed fusion processing of pure copper 纯铜的高精度激光粉末床熔融加工

ADDITIVE MANUFACTURING

IF11.1

2021-12-01

PREAI

Qu, Shuo; Ding, Junhao; Fu, Jin; Fu, Mingwang; Zhang, Baicheng; Song, Xu

Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design 通过可变厚度设计具有优异刚度的弹性各向同性开孔最小表面壳晶格

ADDITIVE MANUFACTURING

IF11.1

2021-11-01

OAAI

Ma, Qingping; Zhang, Lei; Ding, Junhao; Qu, Shuo; Fu, Jin; Zhou, Mingdong; Fu, Ming Wang; Song, Xu; Wang, Michael Yu

Comparison of the microstructure, mechanical properties and distortion of stainless steel 316 L fabricated by micro and conventional laser powder bed fusion 微型和常规激光粉末床熔融制造的不锈钢316 L的组织，力学性能和变形的比较

ADDITIVE MANUFACTURING

IF11.1

2021-08-01

PREAI

Fu, Jin; Qu, Shuo; Ding, Junhao; Song, Xu; Fu, M. W.

研究方向