logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
杜

杜东兴 (Dongxing Du)

qingdao university of science & technology

26H指数
127论文数
2.2K被引数
收录论文 54
发表时间
logo
Numerical evaluation of the pore structure effect-incorporated capillary number on the characterization of the immiscible two-phase displacement process in porous media多孔介质中不可混两相驱替过程中孔隙结构效应融入毛细数对表征的影响的数值评估
errChemical Engineering Science
IF4.3
err2026-04-14
err0
PREAI
errMingsheng Yang; Chi Liu; Zongjin Li; Yingge Li; Dongxing Du
err分享
err收藏
A new prediction model on the effective thermal conductivity of fluid saturated consolidated rock media via the pore-scale numerical study通过孔隙尺度数值研究建立的一种新型预测模型，用于预测流体饱和的固结岩石介质的有效热导率。
errInternational Journal of Heat and Mass Transfer
IF5.8
err2026-02-10
err0
PREAI
errDongxing Du; Zhongwen Zhang; Guoyang Song; Dong Wang; Yingge Li
err分享
err收藏
Mechanistic modeling of the dynamic resistance behavior in betaine-type surfactant stabilized supercritical CO2 foam flooding processes in porous media多孔介质中甜菜碱型表面活性剂稳定超临界CO2泡沫驱替过程中动态电阻行为的机理建模
errPetroleum Science and Technology
IF1.4
err2026-01-01
err1
PREAI
errYang, Mingsheng; Wang, Dong; Li, Yingge; Du, Dongxing
err分享
err收藏
Exploration of the Oil Recovery Enhancement Mechanisms for Miscible CO2 Flooding Processes in Low Permeability Porous Media via Multiscale Geometry Pore-scale Studies低渗透多孔介质中混相CO2驱油提高采收率机制的探索：基于多尺度几何孔尺度研究
errChemical Engineering Research and Design
IF3.9
err2025-11-13
err0
PREAI
errDong Wang; Chi Liu; Zongjin Li; Yingge Li; Dongxing Du
err分享
err收藏
Investigation on the effect of CryoMQL conditions on machining-induced residual stresses, surface layer microstructure and machining deformation of hydrogen-resistant steel关于CryoMQL条件对氢致开裂钢加工诱发的残余应力、表面层微观结构及加工变形影响的研究
errJournal of Manufacturing Processes
IF6.8
err2025-10-15
err0
PREAI
errQuanwei Yang; Jinxing Kong; Yuxin Fang; Dongxing Du; Hankun Luo; Xueqin Wang; Xiuru Li; Zhaocheng Wei
err分享
err收藏
Unveiling the roles of Sub-resolution Pore Structures on Multiphase Fluid Flow Characteristics in Porous Media via the Super-Resolution GAN and the CFD Simulation通过超分辨率生成对抗网络（Super-Resolution GAN）和计算流体动力学（CFD）模拟，揭示亚分辨率孔隙结构在多相流体流动特性中的孔隙介质中的作用。
errchemical engineering research design
IF0
err2025-08-07
err0
PREAI
errZhongwen Zhang; Xin Wang; Liguo Niu; Dong Wang; Yingge Li; Dongxing Du
err分享
err收藏
Mechanism exploration of the hydrodynamic trapping of hydrogen in geological formations via the pore-scale numerical studies通过孔隙尺度数值研究探索地质构造中氢气水动力捕获的机制
errInternational Journal of Hydrogen Energy
IF8.3
err2025-07-22
err0
PREAI
errZeguang Dong; Dong Wang; Shuo Yang; Mingsheng Yang; Yingge Li; Dongxing Du
err分享
err收藏
Insight into the permeability effect on forced convective heat transfer characteristics in porous media based on the pore-scale numerical study基于孔隙尺度数值研究，探讨渗透率对多孔介质中强制对流换热特性的影响。
errINTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
IF6.4
err2025-06-01
err0
PREAI
errYang, Mingsheng; Wang, Dong; Dong, Zeguang; Zhang, Zhongwen; Li, Yingge; Du, Dongxing
err分享
err收藏
Determination of the minimum miscibility pressures of CO2 and multicomponent oil system with a novel diffusion coefficient fit line intersection methodology
errFUEL
IF7.5
err2025-04-01
err0
PREAI
errZang, Hangyu; Yan, Shaoqi; Liu, Zhiwei; Li, Yingge; Du, Dongxing
err分享
err收藏
Pore-scale numerical studies on determination of the effective thermal conductivity of the fluid saturated porous media确定流体饱和多孔介质有效导热系数的孔隙尺度数值研究
errINTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
IF5.8
err2025-03-01
err2
PREAI
errSong, Guoyang; Wang, Dong; Li, Yingge; Li, Wei; Du, Dongxing
err分享
err收藏
Investigation on the effect of cryogenic treatment on initial residual stress and reduction mechanism of hydrogen-resistant steel关于低温处理对氢致开裂钢初始残余应力及其降低机制的研究
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2025-02-17
err0
PREAI
errYang, Quanwei; Kong, Jinxing; Du, Dongxing; Guo, Minglong; Liu, Silai; Li, Xiuru; Dong, Zhigang; Kang, Renke; Wei, Zhaocheng
err分享
err收藏
An analytical machining deformation model of asymmetric structural thin-walled components非对称结构薄壁构件的解析加工变形模型
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-12-01
err0
PREAI
errYang, Quanwei; Kong, Jinxing; Du, Dongxing; Guo, Minglong; Liu, Silai; Li, Xiuru; Dong, Zhigang; Kang, Renke; Wei, Zhaocheng
err分享
err收藏
Quantization of the water presence effect on the diffusion coefficients of the CO2/oil system with the dynamic pendant drop volume analysis technique
errCHEMICAL ENGINEERING SCIENCE
IF4.3
err2023-11-01
err5
PREAI
errLiu, Zhiwei; Yan, Shaoqi; Zang, Hangyu; Cui, Peixuan; Cui, Xincheng; Li, Yingge; Du, Dongxing
err分享
err收藏
Dynamics of two unequal micron-sized viscous emulsion drops flowing in a two-dimensional constricted microcapillary channel: A numerical study
errJOURNAL OF MOLECULAR LIQUIDS
IF5.2
err2023-11-01
err3
PREAI
errMunir, Bacha; Du, Dongxing
err分享
err收藏
Impact of water on miscibility characteristics of the CO2/n-hexadecane system using the pendant drop shape analysis method
errARABIAN JOURNAL OF CHEMISTRY
IF5.2
err2023-09-01
err7
errOAAI
errCui, Peixuan; Liu, Zhiwei; Cui, Xincheng; Li, Yingge; Du, Dongxing
err分享
err收藏
Decorating local Li plus solvation structure and optimizing solid electrolyte interphase with potassium trifluoroacetate for dendrites-free lithium metal anodes用三氟乙酸钾装饰无枝晶的锂金属阳极的局部锂加溶剂化结构并优化固体电解质界面
errMATERIALS TODAY NANO
IF8.2
err2023-08-01
err3
PREAI
errZeng, T.; Shu, C.; Yan, Y.; Du, D.; Xu, H.; Wu, L.; Wen, X.; Liu, S.; Tian, G.; Wang, X.; Zeng, Y.
err分享
err收藏
Elliptical vibration cutting of large-size thin-walled curved surface parts of pure iron by using diamond tool with active cutting edge shift
errCHINESE JOURNAL OF AERONAUTICS
IF5.7
err2023-06-01
err9
errOAAI
errJiao, Zhenhua; Kang, Renke; DU, Dongxing; Guo, Jiang
err分享
err收藏
Numerical simulation on convective heat transfer characteristics in porous media based on the digital rock technology
errINTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
IF5.8
err2022-11-01
err18
PREAI
errLiu, Jiaqi; Yu, Peixian; Li, Yingge; Wan, Chunhao; Du, Dongxing
err分享
err收藏
Prediction of CO2 solubility in NaCl brine under geological conditions with an improved binary interaction parameter in the Soreide-Whitson model
errGEOTHERMICS
IF3.9
err2022-11-01
err15
PREAI
errLiu, Zhiwei; Cui, Peixuan; Cui, Xincheng; Wang, Xinrong; Du, Dongxing
err分享
err收藏
Modelling of surface roughness in elliptical vibration cutting of ductile materials韧性材料椭圆振动切削中表面粗糙度的建模
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2022-11-01
err11
PREAI
errJiao, Zhenhua; Kang, Renke; Zhang, Jianguo; Du, Dongxing; Guo, Jiang
err分享
err收藏

研究方向

强化采油技术（EOR）碳利用及地质埋存技术及应用泡沫液流变学分析多孔介质内流体传输现象微尺度流动及传热强化传热技术先进测试技术
合作学者
合作期刊
李
李宗津 (Zongjin Li)
H 指数: 98 · 论文数: 1.0K
张
张正 (Zheng Zhang)
H 指数: 69 · 论文数: 805
张晓华 封面图
张晓华 (Xiaohua Zhang)
H 指数: 62 · 论文数: 447
刘志伟 封面图
刘志伟 (Zhiwei Liu)
H 指数: 61 · 论文数: 468
李涛 封面图
李涛 (Tao Li)
H 指数: 57 · 论文数: 635
查看更多