logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
I

Inam Ul Ahad

Dublin City University

23H指数
111论文数
1.8K被引数
收录论文 31
发表时间
logo
Physics-Guided Decision-Support Framework for Melt Pool Prediction and Process Stability in Laser Powder Bed Fusion of Nitinol物理引导的激光粉末床熔融镍钛诺熔池预测与工艺稳定性决策支持框架
errMaterials
IF3.2
err2026-08-31
err0
errOAAI
errSampreet Rangaswamy; Merve Nur Doğu; Camille Rubio; Hengfeng Gu; Abdul Khader Khan; Chong Teng; Inam Ul Ahad; Dermot Brabazon
err分享
err收藏
Thermal conductivity enhancement of epoxy abrasive composites using hybrid SiC–Al2O3 fillers via experimental, analytical, and FEA approaches通过实验、分析和有限元方法研究使用混合SiC–Al2O3填料增强环氧磨料复合材料的导热性能
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-28
err0
errOAAI
errSaeid Heidarinassab; Owen Benson; Sampreet Rangaswamy; Inam Ul Ahad; Dermot Brabazon
err分享
err收藏
Correction: Ryan Murphy et al. Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators. Materials 2025, 18, 4931更正：Ryan Murphy等人。研究拉丝和热处理对Ni50.9Ti49.1 R-相致动器响应的影响。Materials 2025, 18, 4931
errMaterials 2026, Vol. 19, Page 40
IF3.2
err2025-12-22
err0
errOAAI
errJosephine Ryan Murphy; Muhannad Ahmed Obeidi; Inam Ul Ahad; Dermot Brabazon
err分享
err收藏
Investigating the Effect of Wire Drawing and Heat Treatment on the Response of Ni50.9Ti49.1 R-Phase Actuators研究拉丝和热处理对Ni50.9Ti49.1 R-相致动器响应的影响
errMaterials 2025, Vol. 18, Page 4931
IF3.2
err2025-10-29
err0
errOAAI
errJosephine Ryan Murphy; Muhannad Ahmed Obeidi; Inam Ul Ahad; Dermot Brabazon
err分享
err收藏
Critical and Strategic Raw Materials for Energy Storage Devices储能设备的关键和战略原材料
errBATTERIES-BASEL
IF4.8
err2025-04-19
err0
errOAAI
errMahnoor, Maham; Chandio, Rabia; Inam, Anum; Ul Ahad, Inam
err分享
err收藏
Investigating Melt Pool Dimensions in Laser Powder Bed Fusion of Nitinol: An Analytical Approach研究镍钛合金激光粉末床融合中的熔池尺寸: 一种分析方法
errADVANCED ENGINEERING MATERIALS
IF3.3
err2024-11-13
err0
errOAAI
errRangaswamy, Sampreet; Bourke, Declan; Monu, Medad C. C.; Healy, Paul; Gu, Hengfeng; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning在液体中使用脉冲激光烧蚀制备碳化硅纳米颗粒，并通过溶剂调节进行粘度优化
errMATERIALS
IF3.2
err2024-09-14
err0
errOAAI
errHeidarinassab, Saeid; Nyabadza, Anesu; Ahad, Inam Ul; Brabazon, Dermot
err分享
err收藏
Residual stresses prediction in transition metal nitrides sputtered coatings using artificial neural network and experimental evaluation of surface morphology
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-09-01
err1
errOAAI
errAbdullah; Ali, Rashid; Lughmani, Waqas Akbar; Abbas, Syed Zameer; Khan, Muhammad Asif; Ul Ahad, Inam
err分享
err收藏
Investigation of ablation efficiency and properties of silicon carbide nanoparticles synthesised using pulsed laser ablation in liquid
errOPTICS AND LASERS IN ENGINEERING
IF3.7
err2024-09-01
err1
errOAAI
errHeidarinassab, Saeid; Nyabadza, Anesu; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
Turbulence model study for aerodynamic analysis of the leading edge tubercle wing for low Reynolds number flows低雷诺数流前缘结节翼气动分析的湍流模型研究
errHELIYON
IF3.6
err2024-06-01
err2
errOAAI
errAli, Intizar; Hussain, Tanweer; Unar, Imran Nazir; Kumar, Laveet; Ul Ahad, Inam
err分享
err收藏
Effect of powder and process parameters on in-situ alloying of nitinol during laser powder bed fusion
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-05-01
err1
errOAAI
errBourke, Declan; Selvam, Karthikeyan Tamil; Obeidi, Muhannad Ahmed; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
The Porosity Design and Deformation Behavior Analysis of Additively Manufactured Bone Scaffolds through Finite Element Modelling and Mechanical Property Investigations
errJOURNAL OF FUNCTIONAL BIOMATERIALS
IF5.2
err2023-10-08
err2
errOAAI
errRasheed, Shummaila; Lughmani, Waqas Akbar; Khan, Muhammad Mahabat; Brabazon, Dermot; Obeidi, Muhannad Ahmed; Ahad, Inam Ul
err分享
err收藏
Effect of post-heat-treatment on thermal and physical characteristics of NiTi tubes produced via conventional drawing and laser powder bed fusion
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-09-01
err3
errOAAI
errKhan, Lehar Asip; Muilwijk, Corne; Ayub, Hasan; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
Energy and stress analysis of a hybrid photovoltaic thermal module
errCASE STUDIES IN THERMAL ENGINEERING
IF6.4
err2023-07-01
err3
errOAAI
errNaqvi, Asad A.; Ahmed, Ahsan; Bin Nadeem, Talha; Khan, Lehar Asip; Ul Ahad, Inam
err分享
err收藏
Steady-state and transient mechanical response analysis of superelastic nitinol lattice structures prior to additive manufacturing: An in-silico study
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-07-01
err4
errOAAI
errKhan, Lehar Asip; Ayub, Hasan; Chekotu, Josiah Cherian; Tamilselvam, Karthikeyan; Muilwijk, Corne; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
Analysis of nitinol actuator response under controlled conductive heating regimes
errRESULTS IN ENGINEERING
IF7.9
err2023-06-01
err9
errOAAI
errKhan, Lehar Asip; McCarthy, Eanna; Muilwijk, Corne; Ul Ahad, Inam; Brabazon, Dermot
err分享
err收藏
Anomaly detection in laser powder bed fusion using machine learning: A review使用机器学习的激光粉末床融合中的异常检测: 综述
errRESULTS IN ENGINEERING
IF7.9
err2023-03-01
err26
errOAAI
errSahar, Tayyaba; Rauf, Muhammad; Murtaza, Ahmar; Khan, Lehar Asip; Ayub, Hasan; Jameel, Syed Muslim; Ul Ahad, Inam
err分享
err收藏
Recent Advances in Titanium Carbide MXene (Ti3C2TX) Cathode Material for Lithium-Air Battery锂空气电池碳化钛MXene (Ti3C2TX) 正极材料的研究进展
errACS APPLIED ENERGY MATERIALS
IF5.5
err2022-09-27
err9
PREAI
errAsad, Samra; Zahoor, Awan; Butt, Faaz Ahmed; Hashmi, Saud; Raza, Faizan; Ul Ahad, Inam; Hakami, Jabir; Ullah, Sami; Al-Ahmed, Amir; Khan, Firoz; Christy, Maria
err分享
err收藏
Performance characteristics of PCM based thermal energy storage system for fluctuating waste heat sources
errCASE STUDIES IN THERMAL ENGINEERING
IF6.4
err2022-06-01
err27
errOAAI
errMalik, Faraz Kaiser; Khan, Muhammad Mahabat; Ahmed, Hassan Farooq; Irfan, Muhammad; Ul Ahad, Inam
err分享
err收藏
Effect of dimple pitch on thermal-hydraulic performance of tubes enhanced with ellipsoidal and teardrop dimples
errCASE STUDIES IN THERMAL ENGINEERING
IF6.4
err2022-03-01
err29
errOAAI
errSabir, Rizwan; Khan, Muhammad Mahabat; Sheikh, Nadeem Ahmed; Ul Ahad, Inam
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
V
Valeria Nicolosi
H 指数: 78 · 论文数: 404
J
John Bosco Balaguru Rayappan
H 指数: 56 · 论文数: 406
D
Dermot Brabazon
H 指数: 54 · 论文数: 495
M
Madoka Takai
H 指数: 46 · 论文数: 369
T
Tomasz Ciach
H 指数: 33 · 论文数: 214
查看更多