J. Aurrekoetxea - Publications, H-index & Citations

J. Aurrekoetxea

mondragon unibertsitatea

28H指数

100论文数

2.0K被引数

收录论文 45

发表时间

Transient Damped Response of a 3D-Printed Composite Cantilever Beam 3D打印复合材料悬臂梁的瞬态阻尼响应

Materials

IF3.2

2026-07-17

OAAI

Miroslaw Wesolowski; Naftal Kaleb Ngughu; Jon Aurrekoetxea Narbarte

Seawater immersion effects on the tensile, flexural, and low-energy impact properties of a basalt/flax hybrid reinforced bio-epoxy 海水浸泡对玄武岩/亚麻混杂增强生物环氧树脂的拉伸、弯曲和低能量冲击性能的影响

Advanced Composites and Hybrid Materials

IF21.8

2026-01-13

OAAI

Alberto Lopez-Arraiza; Germán Castillo-López; Felipe García-Sánchez; Jon Aurrekoetxea

Integrating additively manufactured continuous glass fibre inserts in compression moulding: A novel approach to mitigating fibre–matrix separation effect 将增材制造的连续玻璃纤维嵌件集成到压缩模塑中：一种缓解纤维-基体分离效应的新型方法

Composites Part A: Applied Science and Manufacturing

IF0

2025-12-08

PREAI

Udane Olaziregi; Aritz Esnaola; Maider Baskaran; Jon Aurrekoetxea

Microstructure-Based Numerical Modeling and Experimental Analysis of the Effect of Fiber-Matrix Separation in Glass-Reinforced Polyamide-6 Forged Components 基于微观结构的数值建模与实验分析：玻璃增强聚酰胺-6锻件中纤维-基体分离的影响

POLYMER COMPOSITES

IF4.7

2025-05-20

PREAI

U. Olaziregi; A. Esnaola; M. Baskaran; H. Afonso; J. Ibarretxe; M. Iturrondobeitia; J. Aurrekoetxea

Lateral crashworthiness of UV-pultruded hat profiles with 3D printed bio-inspired inserts UV光固化拉挤型帽形截面的侧向碰撞安全性及具有3D打印仿生嵌入物的性能

POLYMER COMPOSITES

IF4.7

2025-01-24

PREAI

Imanol Ruiz de Eguino; Ivan Saenz-Dominguez; Iosu Tena; Mariasun Sarrionandia; Jon Aurrekoetxea

Predicting the effect of voids generated during RTM on the low-velocity impact behaviour by machine learning-based surrogate models

COMPOSITES PART B-ENGINEERING

IF14.2

2023-07-01

PREAI

Mendikute, Julen; Baskaran, Maider; Llavori, Inigo; Zugasti, Ekhi; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon

Effect of voids on the impact properties of Non-Crimp fabric carbon/epoxy laminates manufactured by liquid composite Moulding

COMPOSITE STRUCTURES

IF7.1

2022-10-01

OAAI

Mendikute, Julen; Baskaran, Maider; Aretxabaleta, Laurentzi; Aurrekoetxea, Jon

The effect of cross-section geometry on crushing behaviour of 3D printed continuous carbon fibre reinforced polyamide profiles

COMPOSITE STRUCTURES

IF7.1

2021-10-01

OAAI

Morales, U.; Esnaola, A.; Iragi, M.; Aretxabaleta, L.; Aurrekoetxea, J.

Impregnation quality diagnosis in Resin Transfer Moulding by machine learning 基于机器学习的树脂传递模塑浸渍质量诊断

COMPOSITES PART B-ENGINEERING

IF14.2

2021-09-01

OAAI

Mendikute, J.; Plazaola, J.; Baskaran, M.; Zugasti, E.; Aretxabaleta, L.; Aurrekoetxea, J.

Quasi-static and dynamic crush behaviour of 3D printed thin-walled profiles reinforced with continuous carbon and glass fibres

COMPOSITES PART B-ENGINEERING

IF14.2

2021-07-01

OAAI

Morales, U.; Esnaola, A.; Iragi, M.; Aretxabaleta, L.; Aurrekoetxea, J.

An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics

COMPOSITES PART B-ENGINEERING

IF14.2

2020-06-01

PREAI

Saenz-Dominguez, I; Tena, I; Sarrionandia, M.; Torre, J.; Aurrekoetxea, J.

Monitoring the evolution of stiffness during ultraviolet curing of a vinyl ester resin with quasi-normal air-coupled ultrasonic spectroscopy

POLYMER TESTING

IF6

2019-12-01

PREAI

Dominguez-Macaya, A.; Alvarez-Arenas, T. E. G.; Saenz-Dominguez, I; Tena, I; Aurrekoetxea, J.; Iturrospe, A.

Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion

COMPOSITES PART B-ENGINEERING

IF14.2

2019-03-01

OAAI

Saenz-Dominguez, I.; Tena, I.; Esnaola, A.; Sarrionandia, M.; Torre, J.; Aurrekoetxea, J.

Development and characterisation of dynamic bi-phase (epoxy/PU) composites for enhanced impact resistance

COMPOSITES PART B-ENGINEERING

IF14.2

2018-12-01

PREAI

Bangash, Muhammad Kashif; de Luzuriaga, Alaitz Ruiz; Aurrekoetxea, Jon; Markaide, Nerea; Grande, Hans-J.; Ferraris, Monica

Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-06-01

PREAI

Saenz-Dominguez, I; Tena, I; Sarrionandia, M.; Torre, J.; Aurrekoetxea, J.

Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

COMPOSITE STRUCTURES

IF7.1

2018-03-01

PREAI

Esnaola, A.; Tena, I.; Saenz-Dominguez, I.; Aurrekoetxea, J.; Gallego, I.; Ulacia, I.

Quality control by infrared thermography of the infusion manufacturing process of composite automotive specimens

QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL

IF4.9

2017-06-21

PREAI

Venegas, P.; Ortiz de Mendibil, I.; Montero, A.; Aurrekoetxea, J.

Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

POLYMER TESTING

IF6

2016-10-01

PREAI

Zabala, H.; Aretxabaleta, L.; Castillo, G.; Aurrekoetxea, J.

Optimization of the semi-hexagonal geometry of a composite crush structure by finite element analysis

COMPOSITES PART B-ENGINEERING

IF14.2

2016-05-01

PREAI

Esnaola, A.; Elguezabal, B.; Aurrekoetxea, J.; Gallego, I.; Ulacia, I.

Rate-dependent phenomenological model for self-reinforced polymers

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2016-05-01

PREAI

Mugica, J. I.; Aretxabaleta, L.; Ulacia, I.; Aurrekoetxea, J.

研究方向