A.J. Comer

university of limerick

H指数:17

被引数:1,083

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Impact of sizing on fiber-matrix interface of basalt and glass fiber reinforced infusible acrylic thermoplastic and bio-epoxy thermoset composites

sizing 对玄武岩纤维和玻璃纤维增强不可熔丙烯酸热塑性塑料及生物环氧热固性复合材料中纤维-基体界面的影响

Materials & Design

IF7.9

2025-08-050

Failure analysis under fatigue loading of glass fibre reinforced in-situ polymerizable thermoplastic and Bio-epoxy based Composites

疲劳载荷下玻璃纤维增强原位可聚合热塑性塑料和生物环氧基复合材料的失效分析

Composites Part C: Open Access

IF7

2025-05-080

OAAI

Hygrothermal ageing effects on failure behaviour of fibre-reinforced polymer composite materials under in-situ SEM testing

湿热老化对纤维增强聚合物复合材料在原位SEM测试下失效行为的影响

COMPOSITES PART B-ENGINEERING

IF14.2

2025-04-014

OAAI

Post impact repair of in-situ polymerisable thermoplastic based carbon fibre composite and its assessment under compression after impact loading

COMPOSITES PART B-ENGINEERING

IF14.2

2024-08-013

OAAI

Investigating the effect of cure schedules and cure initiators on sustainable composites for large offshore structures

COMPOSITE STRUCTURES

IF7.1

2024-01-012

OAAI

Failure prediction in a non-crimp basalt fibre reinforced epoxy composite

COMPOSITE STRUCTURES

IF7.1

2023-10-011

OAAI

Evaluation of the flexural properties and failure evolution of a hybrid composite manufactured by automated dry fibre placement followed by liquid resin infusion

评估通过自动干纤维放置和液体树脂灌注制造的混合复合材料的弯曲性能和失效演变

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-03-016

OAAI

Experimental study of hygrothermal ageing effects on failure modes of non-crimp basalt fibre-reinforced epoxy composite

湿热老化对无卷曲玄武岩纤维增强环氧树脂复合材料失效模式影响的实验研究

COMPOSITE STRUCTURES

IF7.1

2021-11-0132

OAAI

Influence of environmental conditioning on mechanical properties of carbon dry fibre preformed thermoplastic matrix composites manufactured via automated placement-resin infusion process

COMPOSITES COMMUNICATIONS

IF7.7

2021-10-0114

OAAI

Flexural properties and failure mechanisms of infusible thermoplastic-and thermosetting based composite materials for marine applications

COMPOSITE STRUCTURES

IF7.1

2021-10-0119

OAAI

Analysis of failure modes for a non -crimp basalt fiber reinforced epoxy composite under flexural and interlaminar shear loading

COMPOSITE STRUCTURES

IF7.1

2020-08-0121

OAAI

Effect of environmental conditioning on the properties of thermosetting- and thermoplastic-matrix composite materials by resin infusion for marine applications

环境调节对热固性和热塑性复合材料性能的影响通过海洋应用的树脂灌注

COMPOSITES PART B-ENGINEERING

IF14.2

2019-11-0158

PREAI

Numerical and experimental procedure for material calibration using the serial/parallel mixing theory, to analyze different composite failure modes

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2019-10-3112

OAAI

Hydrothermal in-plane-shear strength of carbon fibre/benzoxazine laminates manufactured out-of-autoclave by liquid-resin-infusion

COMPOSITE STRUCTURES

IF7.1

2019-04-0115

OAAI

Mechanical characterisation of carbon fibre-PEEK manufactured by laser-assisted automated-tape-placement and autoclave

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2015-02-01193

PREAI

Investigation into compressive properties of liquid shim for aerospace bolted joints

COMPOSITE STRUCTURES

IF7.1

2014-03-0116

PREAI

Study of the effect of liquid shim on single-lap joint using 3D Digital Image Correlation

COMPOSITE STRUCTURES

IF7.1

2013-02-0132

PREAI

Rhythmic crowd bobbing on a grandstand simulator

JOURNAL OF SOUND AND VIBRATION

IF4.9

2013-01-0120

PREAI

Characterising the behaviour of composite single lap bonded joints using digital image correlation

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2013-01-0163

PREAI

Investigating tensile behaviour of toughened epoxy paste adhesives using circumferentially notched cylindrical bulk specimens

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2012-09-0116

PREAI

A.J. Comer

个人简介

教育背景

工作经历

荣誉奖项

研究方向