Gobinda C. Saha - Publications, H-index & Citations

Gobinda C. Saha

University of New Brunswick

23H指数

85论文数

1.4K被引数

收录论文 36

发表时间

Microwave-assisted pyrolysis of waste hemp biomass for the synthesis of graphene oxide-like material: A feedstock-process-structure-property relationship study 微波辅助热解废弃大麻生物质合成类氧化石墨烯材料：一种原料-工艺-结构-性能关系研究

BIOMASS & BIOENERGY

IF5.8

2026-06-01

PREAI

Asif, Farhan Chowdhury; Ireland, Kelton C.; Saha, Gobinda C.

Modifying strengthening mechanisms in MoNbZrTiV refractory high-entropy alloy particles through different mechanical alloying routes 通过不同的机械合金化路径修改MoNbZrTiV难熔高熵合金颗粒的强化机制

Materials & Design

IF7.9

2025-12-05

OAAI

Marvin S. Tolentino; Aisa Grace D. Custodio; Gobinda C. Saha; Clodualdo Aranas

Hetero-deformation-induced hardening of AlNbTaTiV refractory high-entropy alloy particles through mechanical alloying 通过机械合金化诱导AlNbTaTiV难熔高熵合金颗粒的异质变形强化

International Journal of Refractory Metals and Hard Materials

IF4.6

2025-10-31

OAAI

Marvin S. Tolentino; Aisa Grace D. Custodio; Gobinda C. Saha; Clodualdo Aranas

Finite Element Modeling and Analysis of Ceramic Particle/Substrate Interface Fracture Evolution and Particle Retention at Varying Impact Velocities in Cold Spray 冷喷涂中不同冲击速度下陶瓷颗粒/基体界面断裂演化与颗粒保留的有限元建模与分析

Journal of Thermal Spray Technology

IF3.3

2025-05-27

PREAI

Arif Alam; Philip A. S. Gores; Aisa Grace D. Custodio; Aleksandra Nastic; Jagannadh V. S. N. Sripada; Clodualdo Aranas; Gobinda C. Saha

Modeling and analysis of air filtration performance of a novel nanofiber electrospun nanocomposite filter of thermoplastic polyurethane, graphene oxide, and cellulose nanocrystal 热塑性聚氨酯、氧化石墨烯和纤维素纳米晶体制备的新型纳米纤维静电纺丝纳米复合材料过滤器的空气过滤性能建模与分析

EMERGENT MATERIALS

IF4.1

2025-03-11

PREAI

Ireland, Kelton C.; Saha, Gobinda C.; Afzal, Muhammad T.

Bonding mechanism and microstructural evolution in mechanically-alloyed nanodiamond-reinforced Al6061 composite particle deposits in cold spray 冷喷涂中机械合金化纳米金刚石增强的Al6061复合颗粒沉积物的结合机理和微观结构演变

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-08-01

PREAI

Sripada, Jagannadh V. S. N.; Saha, Dulal Chandra; Saha, Gobinda C.; Jahed, Hamid

Nanostructured Ni(Zn)-Al2O3 cermet particle synthesis in high-energy mechanical alloying method (CG-3:IL07)

CERAMICS INTERNATIONAL

IF5.6

2023-07-01

PREAI

Menon, Vineeth; Sripada, Jagannadh V. S. N.; Saha, Gobinda C.

Graphene-like Carbon Structure Synthesis from Biomass Pyrolysis: A Critical Review on Feedstock-Process-Properties Relationship

C-JOURNAL OF CARBON RESEARCH

IF2.9

2023-03-11

OAAI

Asif, Farhan Chowdhury; Saha, Gobinda C.

An Investigation into the Effects of Electric Field Uniformity on Electrospun TPU Fiber Nano-Scale Morphology

MICROMACHINES

IF3

2023-01-13

OAAI

Morehouse, Aaron; Ireland, Kelton C.; Saha, Gobinda C.

Microstructure and Interfacial Bonding Evolution of Cold Spray Deposited Graphene-Reinforced Composite Feedstock on AZ80 Magnesium Substrate

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2022-12-28

PREAI

Saha, D. C.; Sripada, Jagannadh V. S. N.; Saha, Gobinda C. C.; Jahed, H.

Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17-4PH steel 热等静压对增材制造的17-4ph钢的组织和微机械性能的影响

MATERIALS CHARACTERIZATION

IF5.5

2022-10-01

PREAI

Sripada, Jagannadh; Tian, Yuan; Chadha, Kanwal; Saha, Gobinda; Jahazi, Mohammad; Spray, John; Aranas Jr, Clodualdo

Constitutive modeling of the hot deformation behavior of CoCrFeMnNi high-entropy alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-10-01

PREAI

Brown, Christopher; McCarthy, Thomas; Chadha, Kanwal; Rodrigues, Samuel; Aranas, Clodualdo, Jr.; Saha, Gobinda C.

Study the effect of milling parameters on HE-MA nanostructured Al6061-graphene cermet feedstock particles

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-04-01

PREAI

Sripada, Jagannadh V. S. N.; Saha, Dulal C.; Saha, Gobinda C.; Jahed, Hamid

Biochar as a filler in glassfiber reinforced composites: Experimental study of thermal and mechanical properties 生物炭作为玻璃纤维增强复合材料中的填料: 热和机械性能的实验研究

COMPOSITES PART B-ENGINEERING

IF14.2

2019-10-01

PREAI

Dahal, Raj Kumar; Acharya, Bishnu; Saha, Gobinda; Bissessur, Rabin; Dutta, Animesh; Farooque, Aitazaz

Experimental and computational modeling of effective flexural/tensile properties of microwave pyrolysis biochar reinforced GFRP biocomposites 微波热解生物炭增强GFRP生物复合材料有效弯曲/拉伸性能的实验和计算模型

COMPOSITES PART B-ENGINEERING

IF14.2

2019-10-01

OAAI

Wallace, Chase A.; Saha, Gobinda C.; Afzal, Muhammad T.; Lloyd, Alan

Effects of Post-spray Heat Treatment on Hardness and Wear Properties of Ti-WC High-Pressure Cold Spray Coatings

JOURNAL OF THERMAL SPRAY TECHNOLOGY

IF3.3

2018-10-04

PREAI

Tang, Jonathan; Saha, Gobinda C.; Richter, Peter; Kondas, Jan; Colella, Alberto; Matteazzi, Paolo

Nanocrystalline Al2O3-Ni(Cr) particle synthesis by high-energy mechanical alloying method

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2018-08-01

PREAI

Nath, Lipika; Saha, Gobinda C.; Bruning, Ralf

Flexural strength behavior in pultruded GFRP composites reinforced with high specific-surface-area biochar particles synthesized via microwave pyrolysis

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-07-01

PREAI

Bowlby, Lucas K.; Saha, Gobinda C.; Afzal, Muhammad T.

Micromechanical modeling of thin composite and reinforced magnetoelectric plates - Effective elastic, piezoelectric and piezomagnetic coefficients

COMPOSITE STRUCTURES

IF7.1

2017-07-01

PREAI

Hadjiloizi, D. A.; Kalarnkarov, A. L.; Saha, G. C.; Christoforidis, K. G.; Georgiades, A. V.

Synthesis and characterization of nanocrystalline Al2O3-Ni(Cr) particles using high-energy mechanical alloying process

SURFACE & COATINGS TECHNOLOGY

IF6.1

2017-05-01

PREAI

Nath, Lipika; Saha, Gobinda C.

研究方向