Yusuf Arman - Publications, H-index & Citations

Yusuf Arman

dokuz eylul university

13H指数

42论文数

610被引数

收录论文 15

发表时间

Biomechanics of the implant-supported full arch fixed complete denture manufactured by milling and injection techniques: An experimental and FEA study

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY

IF3.6

2025-04-01

OAAI

Gurkan, Mustafa; Kumbuloglu, Ovul; Sahan, Makbule Heval; Narin, Mert; Kandas, Halis; Arman, Yusuf; Yildiz, Hasan; Pekedis, Mahmut

Transient thermal analysis of the flanged composite plate using Ansys Composite Cure Simulation (ACCS)使用Ansys Composite Cure Simulation (ACCS)对法兰复合板进行瞬态热分析

POLYMER COMPOSITES

IF4.7

2025-03-28

PREAI

Puhurcuoglu, Nihal; Arman, Yusuf

The effects of tears in on other rotator cuff constituents

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2024-09-01

PREAI

Tumer, Devrim; Arman, Yusuf; Havitcioglu, Hasan

Parameter estimation of epoxy resin cure kinetics by dynamics DSC data 通过动力学DSC数据估算环氧树脂固化动力学的参数

POLYMERS FOR ADVANCED TECHNOLOGIES

IF3.4

2024-07-05

OAAI

Puhurcuoglu, Nihal; Arman, Yusuf

Investigation failure behaviours of notched composite plates repaired with using adhesive and patch

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2024-01-27

PREAI

Celik, Abdullah; Turan, Kadir; Arman, Yusuf

Investigation of patch application failure behaviors according to fiber orientation difference at notched composite plates

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2024-01-25

PREAI

Celik, Abdullah; Turan, Kadir; Arman, Yusuf

Investigation of effective coating of the Ti-6Al-4V alloy and 316L stainless steel with graphene or carbon nanotubes with finite element methods

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2020-11-01

OAAI

Tumer, Devrim; Gungorurler, Musa; Havitcioglu, Hasan; Arman, Yusuf

The effect of delamination size and location to buckling behavior of composite materials

COMPOSITES PART B-ENGINEERING

IF14.2

2018-12-01

PREAI

Ipek, Galip; Arman, Yusuf; Celik, Abdullah

The effects of repeated transverse impact load on the burst pressure of composite pressure vessel

COMPOSITES PART B-ENGINEERING

IF14.2

2015-01-01

PREAI

Demir, Ibrahim; Sayman, Onur; Dogan, Akar; Arikan, Volkan; Arman, Yusuf

Evaluating the bond strength of opaque material on porcelain fused to metal restorations (PFM) alloys by scratch test method

MATERIALS & DESIGN

IF7.9

2009-09-01

PREAI

Culha, O.; Zor, M.; Gungor, M. Ali; Arman, Y.; Toparli, M.

Compression-after impact behavior of laminated composite plates subjected to low velocity impact in high temperatures 在高温下受到低速冲击的层压复合板的压缩后冲击行为

COMPOSITE STRUCTURES

IF7.1

2009-06-01

PREAI

Aktas, Mehmet; Karakuzu, Ramazan; Arman, Yusuf

Hole effects on lateral buckling of laminated cantilever beams

COMPOSITES PART B-ENGINEERING

IF14.2

2009-03-01

PREAI

Eryigit, Ersin; Zor, Mehmet; Arman, Yusuf

Thermal stress analysis of Wc-Co/Cr-Ni multilayer coatings on 316L steel substrate during cooling process

MATERIALS & DESIGN

IF7.9

2009-03-01

PREAI

Sayman, Onur; Sen, Faruk; Celik, Erdal; Arman, Yusuf

The effect on residual stresses of porosity and surface roughness in high temperature insulation coatings on Ag tape for magnet technologies

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2008-09-01

PREAI

Arman, Yusuf; Sayman, Onur; Celik, Erdal; Aksoy, Sami; Hascicek, Yusuf S.

Investigation of the influence on residual stresses of porosity in high temperature ZrO2 coatings on Ag tape for magnet technologies

MATERIALS & DESIGN

IF7.9

2007-01-01

PREAI

Arman, Yusuf; Aktas, Mehmet; Celik, Erdal; Mutlu, Ibrahim H.; Sayman, Onur

研究方向