A. Langella - Publications, H-index & Citations

A. Langella

University of Naples Federico II

28H指数

197论文数

3.1K被引数

收录论文 54

发表时间

Investigation on adhesive joining of additively manufactured ULTEM 9085 and ALSi10Mg: effect of adhesive type and substrate characteristics 对增材制造的ULTEM 9085和ALSi10Mg的粘接连接研究：粘接剂类型和基材特性的影响

International Journal of Advanced Manufacturing Technology

IF3.1

2026-08-26

OAAI

Martina Panico; Antonio Langella; Ilaria Papa

Effect of bio-derived additives on the structure and properties of cellulose–casein–lime hybrid composites 生物源添加剂对纤维素-酪蛋白-石灰复合材料的结构和性能的影响

Carbohydrate Polymer Technologies and Applications

IF6.5

2026-08-19

OAAI

Marco Russo; Antonio Langella; Lucia Sansone; Carmine Vitagliano; Maria Rosaria Ricciardi

Supported vs unsupported drilling of thin CFRP/AA2024-T3 stacks: Real-time monitoring of tool-dependent flexural behaviour 支撑与无支撑条件下薄层CFRP/AA2024-T3叠层的钻削：工具依赖性弯曲行为的实时监测

Journal of Manufacturing Processes

IF6.8

2026-03-26

OAAI

Martina Panico; Massimo Durante; Antonio Langella; Luca Boccarusso

PLA coating effect on water aging of basalt and basalt/flax fiber composites PLA涂层对玄武岩及玄武岩/亚麻纤维复合材料水老化的影响

Materials Today Communications

IF4.5

2026-02-13

OAAI

M. Russo; I. Papa; V. Antonucci; A. Langella; M.R. Ricciardi

Comparison between cold incremental and stretch forming of flax fiber-reinforced polypropylene composites 亚麻纤维增强聚丙烯复合材料冷增量成形与拉深成形的比较

The International Journal of Advanced Manufacturing Technology

IF0

2025-12-17

OAAI

Antonio Formisano; Dario De Fazio; Antonio Langella; Martina Panico; Massimo Durante

3D printed sustainable biocomposites based on PLA reinforced with waste vegetal biomasses of the Mediterranean area 基于PLA、以地中海地区废弃物植物生物质为增强材料的3D打印可持续生物复合材料

Journal of Materials Research and Technology

IF6.6

2025-10-30

OAAI

M. Gammino; M. Russo; A. Langella; M.R. Ricciardi; I. Papa; R. Scaffaro

Effect of functional additives and natural fibers on the thermal and mechanical properties of compression-molded PLA biocomposites 功能性添加剂和天然纤维对压缩模塑PLA生物复合材料的 thermal and mechanical properties的影响

JOURNAL OF COMPOSITE MATERIALS

IF2.4

2025-09-01

PREAI

Panico, Martina; Papa, Ilaria; Russo, Pietro; Langella, Antonio

A Preliminary Investigation on the Thermal Behavior of Polysaccharides-Modified Casein 关于多糖改性酪蛋白热行为的初步研究

Journal of Composites Science 2025, Vol. 9, Page 314

IF3.7

2025-08-22

PREAI

Maria R. Ricciardi; Marco Russo; Vincenza Antonucci; Lorena Affatato; Antonio Langella

On the influence of clamping conditions and cutting edge geometry on drilling of thin aluminium stacks 关于夹紧条件和工作边缘几何形状对薄铝堆叠钻孔的影响

CIRP Journal of Manufacturing Science and Technology

IF5.4

2025-08-07

OAAI

Martina Panico; Antonio Langella; Luca Boccarusso

Evaluating the impact of boundary conditions and clamping force in robotic one-up drilling of hybrid stacks 评估边界条件和夹紧力在机器人单次钻孔混合堆叠中的影响

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY

IF5.4

2025-06-11

PREAI

Martina Panico; Eva Begemann; Andreas Gebhardt; Felix Hartmann; Tobias Herrmann; Antonio Langella; Luca Boccarusso

Casein matrix composites reinforced with recycled cellulose and cellulose acetate fibers: formulation and mechanical performance for sustainable applications 用再生纤维素和醋酸纤维素纤维增强的酪蛋白基复合材料: 可持续应用的配方和机械性能

CELLULOSE

IF4.8

2025-03-01

OAAI

Russo, Marco; Langella, Antonio; Sansone, Lucia; Ricciardi, Maria Rosaria

Manufacturing and mechanical performance of lightened gypsum reinforced by hemp/epoxy composites

MATERIALS AND STRUCTURES

IF3.9

2024-10-10

OAAI

Boccarusso, Luca; Capasso, Ilaria; De Fazio, Dario; Durante, Massimo; Iucolano, Fabio; Langella, Antonio

Comparison between conventional and additive processing of polylactic acid subjected to multiple recycling and lauroyl peroxide additivation

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2024-09-23

PREAI

Papa, I.; El Hassanin, A.; Russo, P.; Langella, A.

An Experimental Procedure to Study the High-Speed Orthogonal Cutting of Unidirectional GFRP

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING

IF3.3

2024-04-26

OAAI

Panico, Martina; Boccarusso, Luca; Formisano, Antonio; Villani, Giuseppe; Langella, Antonio

One-shot drilling process for thin CFRP/Aluminium alloys stacks

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2024-02-12

PREAI

Panico, Martina; Durante, Massimo; Langella, Antonio; Boccarusso, Luca

3D-printed metals: Process parameters effects on mechanical properties of 17-4 P H stainless steel

HELIYON

IF3.6

2023-07-01

OAAI

Andreacola, Francesca Romana; Capasso, Ilaria; Langella, Antonio; Brando, Giuseppe

On low-velocity impact behaviour of composite laminates: Damage investigation and influence of matrix and temperature

PROGRESS IN AEROSPACE SCIENCES

IF16.2

2022-02-01

OAAI

Lopresto, V; Langella, A.; Pagliarulo, V; Papa, I

Influence of the impactor mass on the dynamic behaviour of woven carbon/ vinylester laminates

COMPOSITE STRUCTURES

IF7.1

2022-02-01

PREAI

Papa, Ilaria; Donadio, Federica; Langella, Antonio; Lopresto, Valentina; Russo, Pietro

Manufacturing and testing of single polymer polyamide 66 composites

COMPOSITE STRUCTURES

IF7.1

2021-11-01

PREAI

Papa, I; Langella, A.; Lopresto, V; Russo, P.

Production of hemp-gypsum composites with enhanced flexural and impact resistance

CONSTRUCTION AND BUILDING MATERIALS

IF8

2020-11-01

PREAI

Boccarusso, Luca; Durante, Massimo; Iucolano, Fabio; Mocerino, Davide; Langella, Antonio

研究方向