Tomasz Trzepieciński - Publications, H-index & Citations

Tomasz Trzepieciński

rzeszow university of technology

33H指数

371论文数

3.9K被引数

收录论文 110

发表时间

Development and Characterization of Functionally Graded Sisal/Glass Fiber-Reinforced Polymer Composites 功能梯度剑麻/玻璃纤维增强聚合物复合材料的开发与表征

Materials

IF3.2

2026-08-04

OAAI

Henok Dereje Nega; Hailu Shimels Gebremedhen; Tomasz Trzepieciński; Fasikaw Kibrete; Temesgen Tadesse Feisa; Dereje Engida Woldemichael

Data-Driven Modeling of Friction in Drawbead Test Through Advanced Machine Learning 基于先进机器学习的数据驱动拉深筋测试摩擦建模

Materials

IF3.2

2026-06-19

OAAI

Tomasz Trzepieciński; Romuald Fejkiel; Marek Kowalik

Influence of Drilling Strategy and Cutting Parameters on Selected Aspects of the Single-Shot Drilling of CFRP/AISI 316L Steel Stacks 钻孔策略和切削参数对CFRP/AISI 316L钢叠层单次钻孔特定方面的影响

Materials

IF3.2

2026-06-16

OAAI

Krzysztof Szwajka; Joanna Zielińska-Szwajka; Tomasz Trzepieciński; Marek Szewczyk

Freezing Non-Equilibrium Structural Defects in Integrated Cu4MgO5/ZnO Nanocomposites for Extended Visible-Light-Driven Solar Fuel Production 通过冻结非平衡结构缺陷在集成Cu4MgO5/ZnO纳米复合材料中实现扩展可见光驱动的太阳能燃料生产

Catalysts

IF4

2026-05-22

OAAI

Abdelatif Aouadi; Nader Shehata; Okba Zemali; Hocine Sadam Nesrat; Salah Eddine Laouini; Hafidha Terea; Djamila Hamada Saoud; Tomasz Trzepieciński

Forming Technologies and Mechanical Properties of Advanced Materials—Second Edition 先进材料的成形技术与力学性能—第二版

Materials

IF3.2

2026-04-28

OAAI

Tomasz Trzepieciński; Valentin Ştefan Oleksik; Sherwan Mohammed Najm

Effect of Contact Conditions on Frictional Characteristics of Low-Carbon Deep-Drawn Steel Sheets 接触条件对低碳深冲钢板的摩擦特性的影响

Materials

IF3.2

2026-04-05

OAAI

Tomasz Trzepieciński; Sherwan Mohammed Najm; Valentin Oleksik; Mihaela Oleksik

Modeling the Friction Behavior of Low-Carbon Steel Sheets Using Various Machine Learning Algorithms Based on Strip Drawing Test Data 基于带钢拉伸试验数据，利用多种机器学习算法对低碳钢板的摩擦行为进行建模

Materials

IF3.2

2026-03-13

OAAI

Tomasz Trzepieciński

Scaffold-less manufacturing of inclined thin walls from M300 steel using the L-PBF method 无支撑制造M300钢倾斜薄壁结构：采用L-PBF方法

Archives of Civil and Mechanical Engineering

IF4.4

2026-03-11

PREAI

Krzysztof Żaba; Maciej Balcerzak; Aleksandra Iwańczak; Ilona Różycka; Łukasz Kuczek; Tomasz Trzepieciński; Jarosław Mizera

Effect of Build-Up Strategy and Selective Laser Melting Process Parameters on Microstructure and Mechanical Properties of 316L Stainless Steel 堆积策略和选择性激光熔化工艺参数对316L不锈钢微观结构和力学性能的影响

Materials

IF3.2

2026-03-04

OAAI

Krzysztof Żaba; Maciej Balcerzak; Paweł Pałka; Radek Čada; Tomasz Trzepieciński; Martyna Szczepańska

Effect of Post-Printing Methods on the Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Samples Fabricated Using Laser Powder Bed Fusion 采用激光粉末床熔融制造的Ti6Al4V钛合金样品的后处理方法对其微观结构和力学性能的影响

Materials

IF3.2

2026-03-04

OAAI

Krzysztof Żaba; Stanislav Rusz; Alicja Haslik-Sopata; Łukasz Kuczek; Ilona Różycka; Maciej Balcerzak; Tomasz Trzepieciński

Comparison of Approaches to Determining the Coefficient of Friction in Stretch-Forming Conditions 在拉伸成形条件下确定摩擦系数方法的比较

Materials

IF3.2

2026-03-03

OAAI

Tomasz Trzepieciński; Krzysztof Szwajka; Valmir Dias Luiz; Joanna Zielińska-Szwajka; Marek Szewczyk

Friction performance of carbon fibre-reinforced epoxy composites sliding against direct metal laser sintered steel countersamples 碳纤维增强环氧复合材料的摩擦性能及其与直接金属激光烧结钢对偶件的滑动摩擦研究

The International Journal of Advanced Manufacturing Technology

IF0

2026-02-19

PREAI

Tomasz Trzepieciński; Andrzej Kubit; Wojciech Jurczak; Krzysztof Żaba

PVP-Coated Fe3O4/Fe2O3 Nanocomposites for Efficient Photocatalytic Degradation of Organic and Inorganic Pollutants 聚乙烯吡咯烷酮包覆的Fe₃O₄/Fe₂O₃纳米复合材料用于高效光催化降解有机和无机污染物

Journal of Applied Polymer Science

IF2.8

2026-02-01

PREAI

Tedjani, Mohammed Laid; Kir, Iman; Laouini, Salah Eddine; Bouafia, Abderrhmane; Meneceur, Souhaila; Guerram, Abdelmadjid; Khaled, Bilal; Abdullah, Mahmood M. S.; Trzepiecinski, Tomasz

Eco-friendly dye removal: Optimized synthesis of a magnetic Schiff base biocomposite from peanut shell chitosan for enhanced Reactive Blue 19 adsorption 环保染料去除：以花生壳壳聚糖为原料优化合成磁性希夫碱生物复合材料，以增强活性蓝19吸附

Canadian Journal of Chemical Engineering

IF1.9

2026-02-01

PREAI

Khaoula, Alia; Djamal, Atia; Terea, Hafidha; Laouini, Salah Eddine; Bouafia, Abderrhmane; Abdullah, Mahmood M. S.; Trzepiecinski, Tomasz

Effect of Strain Rate on the Formability Prediction of Cold-Rolled DX56D+Z100-M-C-O Steel Sheets 应变率对冷轧DX56D+Z100-M-C-O钢板成形性预测的影响

Materials

IF3.2

2025-12-27

OAAI

Vít Novák; František Tatíček; Ondřej Stejskal; Tomasz Trzepieciński; Krzysztof Żaba

Sol-gel synthesized MgO nanoparticles: Versatile applications in photocatalytic dye degradation, heavy metal removal, CO2 conversion, hydrogen production, and photoelectrochemical performance 溶胶-凝胶法制备的MgO纳米颗粒：在光催化染料降解、重金属去除、CO2转化、氢气生产和光电化学性能方面的多功能应用

Environmental Progress & Sustainable Energy

IF2.3

2025-12-01

PREAI

Aouadi, Sara; Ferhat, Mohammed Fouad; Nesrat, Hocine Sadam; Bouafia, Abderrhmane; Laouini, Salah Eddine; Al-Essa, Ethar M.; Abdullah, Mahmood M. S.; Trzepiecinski, Tomasz; Terea, Hafidha; Saoud, Djamila Hamada; Aouadi, Abdelatif

Vibration Analysis of Cantilever Beam with Free End Resting on 3D-Printed Spring and Considering the Effect of Accelerometer and Exciter Masses 悬臂梁自由端置于3D打印弹簧上的振动分析，并考虑加速度计和激振器质量的影响

APPLIED SCIENCES-BASEL

IF2.5

2025-11-20

PREAI

Mahdi, Hassan H.; Nama, Sami A.; Mezher, Marwan T.; Trzepiecinski, Tomasz

Effects of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of Explosion-Welded Al-Cu Bimetallic Plates 等通道角挤压对爆炸焊接Al-Cu双金属板微观结构和力学性能的影响

Materials 2025, Vol. 18, Page 5080

IF3.2

2025-11-08

OAAI

Krzysztof Żaba; Kinga Ortyl; Ondřej Hilšer; Martin Pastrnak; Łukasz Kuczek; Ilona Różycka; Paweł Pałka; Aleksander Gałka; Tomasz Trzepieciński