logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Manidipto Mukherjee

csir-central mechanical engineering research institute

18H指数
111论文数
1.2K被引数
收录论文 33
发表时间
logo
Effect of deposition strategy on columnar to equiaxed transition, texture evolution, and mechanical anisotropy in Al 4043 WAAM Wall structures沉积策略对Al 4043 WAAM墙结构中柱状到等轴转变、织构演化和力学各向异性的影响
errMaterials Characterization
IF5.5
err2026-08-20
err0
PREAI
errReyazul Warsi; Md Murtuja Husain; Amrit Raj Paul; Kashif Hasan Kazmi; Manidipto Mukherjee; Md Sajid Hussain; Amitava Mandal
err分享
err收藏
Digital twin-empowered sustainable remanufacturing of high-value components: a review of intelligent repair strategies数字孪生赋能的高价值部件可持续再制造：智能修复策略综述
errComputers & Industrial Engineering
IF6.5
err2026-07-16
err0
PREAI
errSomnath Nandi; Manidipto Mukherjee; Shantanu Kumar Das
err分享
err收藏
Substantial improvements in mechanical properties at elevated temperatures of Al-Cu-Ni-Mn-X alloy through arc surface remelting通过电弧表面重熔显著提高Al-Cu-Ni-Mn-X合金的高温力学性能
errMaterials Science and Engineering A-Structural Materials Properties Microstructure and Processing
IF7
err2026-07-02
err0
PREAI
errDiya Mukherjee; Yoshit Tiwari; Rajdeep Sarkar; Himadri Roy; Nilrudra Mandal; Dong Qiu; Mark Easton; Manidipto Mukherjee
err分享
err收藏
Parametric optimization of Hastelloy (C-276) machining by wire EDM: integrated neural network and meta-heuristic method采用线切割电火花加工优化哈氏合金(C-276)加工参数：神经网络与元启发式方法的集成
errInternational Journal of Interactive Design and Manufacturing - IJIDeM
IF2.5
err2026-07-01
err0
PREAI
errBiswas, Shatarupa; Mandal, Amitava; Mukherjee, Manidipto
err分享
err收藏
Scale effect on microstructure, mechanical, fatigue properties, and anisotropy of wire arc additively manufactured Inconel 625 alloy尺度效应对丝材电弧增材制造Inconel 625合金微观结构、力学性能、疲劳性能及各向异性的影响
errMaterials Chemistry and Physics
IF4.7
err2026-05-19
err0
PREAI
errJagdish Rana; Yoshit Tiwari; Manidipto Mukherjee; Vidit Gaur
err分享
err收藏
Wire Arc Additive Manufacturing of High-Strength Al4043 Parts Using TiN and La2O3 as Grain Refiners使用TiN和La2O3作为晶粒细化剂的高强度Al4043零件的丝材电弧增材制造
errAdvanced Engineering Materials
IF3.3
err2026-05-15
err0
PREAI
errSimran Nath; Manidipto Mukherjee; Rahul Panat; Jung-Ting Tsai; Ramasubramanian Lakshmi Narayan
err分享
err收藏
Using the synergistic role of intermetallics and multiple solute segregation at θ' interfaces to stabilise the microstructure of Al-Cu-Mn-Ni-X alloy at elevated temperatures利用金属间化合物与多组元溶质在θ'界面处的协同作用，来稳定Al-Cu-Mn-Ni-X合金的高温微观结构
errJournal of Alloys and Compounds
IF6.3
err2026-03-20
err0
errOAAI
errDiya Mukherjee; Rajdeep Sarkar; Himadri Roy; Dong Qiu; Shivam Kumar; Nilrudra Mandal; Manidipto Mukherjee; Sudip Kumar Samanta; Mark Easton
err分享
err收藏
Influence of process parameters on the microstructure and mechanical behavior of wire arc additive manufactured duplex stainless steel 2209 alloy工艺参数对丝材电弧增材制造2209双相不锈钢合金微观结构及力学行为的影响
errProgress in Additive Manufacturing
IF5.4
err2026-02-26
err0
PREAI
errPrasanth Grandhi; Gurabvaiah Punugupati; G. B. Veeresh Kumar; Hymavathi Madivada; C. S. P. Rao; Manidipto Mukherjee
err分享
err收藏
Enhancing microstructure and hardness of WAAM-fabricated inconel 718 through in-situ hammering通过原位锤击增强增材制造Inconel 718的微观结构和硬度
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-02-25
err0
PREAI
errMriganka Maity; Manivannan Raja; Manidipto Mukherjee
err分享
err收藏
Parametric Optimisation in Friction Stir Butt Welding of Spring Steel to Commercially Pure Aluminium Sheet弹簧钢与商业纯铝板摩擦搅拌对接焊中的参数优化
errJournal of Materials Engineering and Performance
IF2
err2026-01-01
err0
PREAI
errDatta, Abhijit; Mandal, Nilrudra; Mukherjee, Manidipto; Bapanapalle, Chandra Obulesu; Sarkar, Sukanta; Chakraborty, Shitanshu Shekhar
err分享
err收藏
Development of RSM-based multi-attribute genetic algorithm (RAGA) for optimisation of bead profile and hardness of Al4043 weld deposits基于响应面法（RSM）的多属性遗传算法（RAGA）的开发，用于优化Al4043焊缝沉积物的焊道轮廓和硬度
errCogent Engineering
IF2.5
err2025-12-31
err0
PREAI
errPaul, Amrit Raj; Biswas, Shatarupa; Warsi, Reyazul; Mukherjee, Manidipto; Mandal, Amitava
err分享
err收藏
Use of the powder metallurgy route for the fabrication of bioactive low stiffness multi layered composite structures采用粉末冶金法制备生物活性低刚度多层复合结构
errMaterials and Manufacturing Processes
IF4.7
err2025-11-17
err0
PREAI
errA. C. Arun Raj; Manidipto Mukherjee; Malay Kundu; Shubhabrata Datta
err分享
err收藏
Understanding the directional deformation and failure characteristics of wire arc additively manufactured Ni-based superalloy using in-situ testing and DIC采用原位测试和DIC方法研究丝材电弧增材制造镍基高温合金的方向性变形及失效特性
errEngineering Failure Analysis
IF5.7
err2025-07-16
err0
PREAI
errYoshit Tiwari; Diya Mukherjee; Sandip Haldar; Himadri Roy; Kaustav Barat; Manidipto Mukherjee
err分享
err收藏
Effect of alumina on Fe-Al intermetallics at the SS-Al bimetallic interface fabricated via wire arc directed energy deposition通过丝弧定向能量沉积制备的SS-Al双金属界面处氧化铝对Fe-Al金属间化合物的影响
errJournal of Materials Science & Technology
IF14.3
err2025-07-02
err0
errOAAI
errAmrit Raj Paul; Jayshri Dumbre; Manidipto Mukherjee; Dilpreet Singh; Edwin LH. Mayes; Matthew R. Field; Maciej Mazur; Dong Qiu
err分享
err收藏
Influence of heat input on the interfacial characteristics of SS316L-In718 bi-metallic deposition for wire arc additive manufacturing热输入对丝材电弧增材制造中SS316L-In718双金属材料沉积界面特性的影响
errMATERIALS LETTERS
IF2.7
err2025-05-10
err0
PREAI
errBiswas, Shatarupa; Nandi, Somnath; Hussain, Md Sajid; Mandal, Amitava; Mukherjee, Manidipto
err分享
err收藏
Influence of post-deposition aging treatment (PDAT) on microstructural and mechanical properties of wire arc directed energy deposited Ti6Al4V thin wall后处理老化处理（PDAT）对丝材电弧定向能量沉积Ti6Al4V薄壁件微观结构和力学性能的影响
errRapid Prototyping Journal
IF3.6
err2025-04-29
err0
PREAI
errSuraj Yadav; Amrit Raj Paul; Yoshit Tiwari; Dilpreet Singh; Manidipto Mukherjee
err分享
err收藏
Optimizing Surface Finish and Material Removal Rate in Wire EDM of Zirconium-Based Bulk Metallic Glass Vitreloy 1: A Parametric, Elemental, Recast Layer, and Hardness Analysis优化锆基块体金属玻璃Vitreloy 1线切割电火花加工的表面光洁度和材料去除率：参数、元素、重铸层和硬度分析
errinternational journal of engineering science
IF2.9
err2025-04-21
err0
PREAI
errBarman, Siddhant S.; Mukherjee, Manidipto
err分享
err收藏
On the Characteristic Evaluation of Bimetallic Interface of Carbon Steel (EN31) and Aluminium (AA4043) for Wire Arc Additive Manufacturing
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2025-03-01
err0
PREAI
errAhammed, C. P. Afsal; Nandi, Somnath; Paul, Amrit Raj; Sreejith, B.; Jose, M. J.; Mukherjee, Manidipto
err分享
err收藏
Influence of in-situ hammering on microstructural, mechanical and residual stress behaviour of inconel 718 during wire arc additive manufacturing
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-12-06
err0
PREAI
errMaity, Mriganka; Tiwari, Yoshit; Manivannan, R.; Mukherjee, Manidipto
err分享
err收藏
Grain refinement and morphological control of intermetallic compounds: A comprehensive review金属间化合物的晶粒细化和形态控制: 综合评述
errCURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
IF13.4
err2024-12-01
err0
errOAAI
errPaul, Amrit Raj; Dumbre, Jayshri; Qiu, Dong; Easton, Mark; Mazur, Maciej; Mukherjee, Manidipto
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Mark Easton
H 指数: 63 · 论文数: 361
D
Dong Qiu
H 指数: 49 · 论文数: 177
C
Chitra Mandal
H 指数: 45 · 论文数: 228
S
Sujata Mohanty
H 指数: 40 · 论文数: 234
T
Tapan Kumar Pal
H 指数: 36 · 论文数: 229
查看更多