logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
V

V. Krishnaraj

psg college of technology

28H指数
157论文数
3.2K被引数
收录论文 12
发表时间
logo
A critical review on numerical modeling of cutting-induced damages for CFRP composites对切割诱导损伤的CFRP复合材料数值建模的综述
errComposite Structures
IF7.1
err2025-11-10
err0
PREAI
errJinyang Xu; S. Samsudeensadham; Anand Prakash Jaiswal; Gergely Magyar; Tamás Lukács; Norbert Geier; Vijayan Krishnaraj; Jiaxin Shen; Zhe Shi; Ming Chen
err分享
err收藏
A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drillingCFRP钻井综述: 基本机理、损伤问题和高质量钻井方法
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-05-01
err53
errOAAI
errXu, Jinyang; Geier, Norbert; Shen, Jiaxin; Krishnaraj, Vijayan; Samsudeensadham, S.
err分享
err收藏
Drilling of filament wound hybrid composite tubes: An experimental study
errCOMPOSITE STRUCTURES
IF7.1
err2023-03-01
err7
PREAI
errBraiek, Sonia; Zitoune, Redouane; Krishnaraj, Vijayan; BenKhalifa, Ated; Ameur, Mohamed Faycal; Khashaba, Usama A.; Zidi, Mondher
err分享
err收藏
Improving dry machining performance of surface modified cutting tools through combined effect of texture and TiN-WS2 coating
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-01-01
err25
PREAI
errRonadson, Bibeye Jahaziel; Vijayan, Krishnaraj; Sanmugam, Sudhagar; Badhirappan, Geetha Priyadarshini
err分享
err收藏
Performance analysis of Ti2AlN superimposed WC cutting tool
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-10-01
err2
PREAI
errKumar, Aswani Sasi; Badhirappan, Geetha Priyadarshini; Ronadson, Bibeye Jahaziel; Vijayan, Krishnaraj
err分享
err收藏
Influence of varying nitrogen content on the structural, tribomechanical properties and machining performance of CrNx-WS2 nanocomposite coatings
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-08-01
err3
PREAI
errRonadson, Bibeye Jahaziel; Vijayan, Krishnaraj; Kumar, Aswani Sasi; Nampoothiri, Jayakrishnan; Jeganathan, Kanchana; Badhirappan, Geetha Priyadarshini
err分享
err收藏
Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills
errCOMPOSITE STRUCTURES
IF7.1
err2020-02-01
err85
errOAAI
errXu, Jinyang; Ji, Min; Davim, J. Paulo; Chen, Ming; El Mansori, Mohamed; Krishnaraj, Vijayan
err分享
err收藏
High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic EmissionCFRP的高速边缘修整和使用声发射在线监测Router刀的性能
errMATERIALS
IF3.2
err2016-09-26
err33
errOAAI
errPrakash, Rangasamy; Krishnaraj, Vijayan; Zitoune, Redouane; Sheikh-Ahmad, Jamal
err分享
err收藏
Tribo-functional design of double cone drill implications in tool wear during drilling of copper mesh/CFRP/woven ply
errWEAR
IF6.1
err2013-04-01
err74
PREAI
errZitoune, Redouane; El Mansori, Mohamed; Krishnaraj, Vijayan
err分享
err收藏
Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates碳纤维增强塑料 (CFRP) 层压板高速钻削加工参数的优化
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2012-06-01
err315
PREAI
errKrishnaraj, Vijayan; Prabukarthi, A.; Ramanathan, Arun; Elanghovan, N.; Kumar, M. Senthil; Zitoune, Redouane; Davim, J. P.
err分享
err收藏
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich加工参数及新型纳米涂层刀具对CFRP/铝夹层钻削性能的影响
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2012-04-01
err177
PREAI
errZitoune, Redouane; Krishnaraj, Vijayan; Almabouacif, Belkacem Sofiane; Collombet, Francis; Sima, Michal; Jolin, Alain
err分享
err收藏
Study of drilling of composite material and aluminium stack
errCOMPOSITE STRUCTURES
IF7.1
err2010-04-01
err254
PREAI
errZitoune, Redouane; Krishnaraj, Vijayan; Collombet, Francis
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
J
J. Paulo Davim
H 指数: 91 · 论文数: 860
M
Mohamed El Mansori
H 指数: 48 · 论文数: 369
徐锦泱 封面图
徐锦泱 (Jinyang Xu)
H 指数: 42 · 论文数: 169
R
Rédouane Zitoune
H 指数: 37 · 论文数: 208
U
U.A. Khashaba
H 指数: 33 · 论文数: 86
查看更多