logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
H

Hamed Saeidi Googarchin

Iran University of Science and Technology

24H指数
87论文数
1.5K被引数
收录论文 44
发表时间
logo
Bondline thickness and environmental aging influences on the fracture behavior of dissimilar FRP-metal adhesive joints under mode I loading: semi-empirical equations for cohesive zone modeling胶层厚度和环境老化对模态I载荷下异质FRP-金属胶接接头断裂行为的影响：内聚区模型半经验方程
errEngineering Fracture Mechanics
IF5.3
err2026-08-10
err0
PREAI
errJodatnia, Shervin; Googarchin, Hamed Saeidi
err分享
err收藏
Designing High-Toughness Dissimilar Material Interfaces: A Bio-Inspired Fractal Approach to Laser Surface Engineering of Al/CFRP Joints设计高韧性异质材料界面：一种生物启发的分形方法用于铝/碳纤维增强复合材料接头的激光表面工程
errComposites Part C: Open Access
IF7
err2026-05-14
err0
errOAAI
errMilad Khezri; Ali Keshavarzi; Masoud Rooygari; Hamed Saeidi Googarchin; Mohammad Hassan Shojaeefard
err分享
err收藏
A review on structural and mechanical insights into electric vehicle battery packs: Subsystems, standards, and design innovations关于电动汽车电池包的结构与力学见解综述：子系统、标准及设计创新
errJournal of Energy Storage
IF9.8
err2026-03-27
err0
PREAI
errSeyed Hooman GhasemiPourMasoule; Ali Keshavarzi; Hamed Saeidi Googarchin
err分享
err收藏
Synergistic toughening of dissimilar Al/CFRP adhesive joints via ternary Co-Zn-Al layered double hydroxides nanoparticles: Fracture mechanics and cohesive zone modeling异质Al/CFRP胶接接头的协同增韧：通过三元Co-Zn-Al层状双氢氧化物纳米粒子的断裂力学与内聚区建模
errMaterials & Design
IF7.9
err2026-02-14
err0
errOAAI
errAli Keshavarzi; Seyed Hooman GhasemiPourMasoule; Hamed Saeidi Googarchin
err分享
err收藏
Harnessing predictable failure: a bio-inspired adhesively bonded Al/CFRP hybrid structure with guided crushing for enhanced crashworthiness under oblique loading利用可预测的失效：一种受生物启发的具有导向压溃功能的胶接Al/CFRP混合结构，用于在斜向载荷下增强抗撞性
errMaterials & Design
IF7.9
err2026-01-07
err0
errOAAI
errAlireza Baratian Sani Devin; Ali Keshavarzi; Hamed Saeidi Googarchin
err分享
err收藏
Comparison of three different TSLs for CZ modeling of automotive PVB laminated glass under impact loading三种不同TSLs在冲击载荷下对汽车PVB夹层玻璃CZ建模的比较
errInternational Journal of Adhesion and Adhesives
IF3.5
err2025-09-11
err0
PREAI
errAli Mohammadi; Hamed Saeidi Googarchin; Mohammadhossein Shahriari; Hamed Hampaiyan Miandowab
err分享
err收藏
Adhesive bonding in impact crushing of automotive Al-CFRP hybrid tubes: a theoretical, experimental and numerical investigation汽车Al-CFRP混合管在冲击破碎中的粘接连接：理论、实验与数值研究
errInternational Journal of Adhesion and Adhesives
IF3.5
err2025-07-24
err0
PREAI
errReza Rahmani; Hamed Saeidi Googarchin
err分享
err收藏
Bio-inspired energy absorbers: Evolutionary designs and mechanical performance under various loading conditions仿生能量吸收器：进化设计与不同载荷条件下的力学性能
errMechanics Based Design of Structures and Machines
IF2.9
err2025-07-21
err0
PREAI
errAlireza Baratian Sani Devin; Ali Keshavarzi; Amir Arsalan Hemami; Amin Feyz Bashipoor; Hamed Saeidi Googarchin
err分享
err收藏
From Nature to Engineering: The Evolutionary Journey of Bio-Inspired Energy Absorbers Across Diverse Loading Conditions从自然到工程：生物启发式能量吸收器在多样化载荷条件下的演化历程
errThin-Walled Structures
IF6.6
err2025-07-11
err0
PREAI
errAlireza Baratian Sani Devin; Ali Keshavarzi; Amir Arsalan Hemami; Amin Feyz Bashipoor; Hamed Saeidi Googarchin
err分享
err收藏
Design of a novel bonded-SENB specimen for determining the pure modes and the mixed-mode cohesive fracture energies in brittle and quasi-brittle adhesives用于确定脆性和准脆性粘合剂中的纯模式和混合模式内聚断裂能的新型粘结SENB试样的设计
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2025-06-05
err0
PREAI
errSanami, Ghazaal Talebi; Bidadi, Jamal; Gheibi, Mohammad Reza; Googarchin, Hamed Saeidi
err分享
err收藏
Influences of freeze, water immersion, and cyclic freeze-thaw environmental conditions on crashworthiness performance of GFRP circular tubes subjected to axial and lateral quasi-static load冻结、水浸及循环冻融环境条件对承受轴向和横向准静态载荷的GFRP圆形管抗撞性能的影响
errComposites Communications
IF7.7
err2025-05-30
err0
PREAI
errHamed Hampaiyan Miandowab; Jamal Bidadi; Hamad Saeidi Googarchin
err分享
err收藏
Experimental study on mode I fracture response of adhesive joints subjected to systematic creep damage
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2025-04-01
err0
PREAI
errBidadi, Jamal; Googarchin, Hamed Saeidi
err分享
err收藏
Influences of freeze-thaw cycles (FTC) on tensile properties and mixed-mode I/II fracture response of epoxy resin materials
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2025-04-01
err0
PREAI
errBidadi, Jamal; Googarchin, Hamed Saeidi
err分享
err收藏
Numerical analysis of bio-inspired foam-filled multi-cell tapered tubes for energy absorption生物启发性泡沫填充多胞变截面管能量吸收的数值分析
errMECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
IF2.9
err2025-02-13
err4
PREAI
errHamed Saeidi Googarchin; Shakib Sadeghi; Ali Keshavarzi
err分享
err收藏
Crashworthiness of adhesively bonded bio-inspired AL/CFRP hybrid tubes under lateral loading侧向载荷下粘合的仿生AL/CFRP混合管的耐撞性
errMECHANICS OF ADVANCED MATERIALS AND STRUCTURES
IF0
err2025-02-01
err1
PREAI
errLatifzadeh, Farhad; Keshavarzi, Ali; Googarchin, Hamed Saeidi
err分享
err收藏
Adhesive bonding in automotive hybrid multi-cell square tubes: Experimental and numerical investigation on quasi-static axial crashworthiness performance
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2024-12-01
err10
PREAI
errBidadi, Jamal; Arabha, Mohsen; Googarchin, Hamed Saeidi
err分享
err收藏
Local reinforcement of adhesively bonded square shape aluminum energy absorber with CFRP under quasi-static axial loading: An experimental and numerical study
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2024-12-01
err13
PREAI
errKeshavarzi, Ali; Googarchin, Hamed Saeidi
err分享
err收藏
Experimental study on the residual strength of butt adhesive joints subjected to systematic creep damage
errPOLYMER ENGINEERING AND SCIENCE
IF3.2
err2024-09-23
err2
PREAI
errBidadi, Jamal; Saeidi Googarchin, Hamed
err分享
err收藏
Investigation on bending collapse behavior of similar and dissimilar Aluminum-Steel hat-section sandwich beams jointed by structural adhesive: An experimental, numerical and theoretical study
errJOURNAL OF SANDWICH STRUCTURES & MATERIALS
IF2.8
err2024-09-22
err1
PREAI
errMiandowab, Hamed Hampaiyan; Bidadi, Jamal; Googarchin, Hamad Saeidi
err分享
err收藏
Strain-based criteria for brittle failure prediction of solids containing blunt V-notches under pure mode I loading基于应变的标准，用于在纯模式I载荷下预测包含钝v形缺口的固体的脆性破坏
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-08-01
err3
PREAI
errBidadi, J.; Ashkpour, A.; Googarchin, H. Saeidi; Ayatollahi, MR.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
L
Lucas F. M. da Silva
H 指数: 81 · 论文数: 938
M
M.R. Ayatollahi
H 指数: 79 · 论文数: 531
M
M.R.M. Aliha
H 指数: 74 · 论文数: 263
M
M. Shariyat
H 指数: 38 · 论文数: 219
A
A. Keshavarzi
H 指数: 33 · 论文数: 114
查看更多