logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
李

李军超 (Junchao Li)

chongqing university

27H指数
135论文数
1.9K被引数
收录论文 49
发表时间
logo
Design, experimental validation, and load-dependent numerical assessment of a 1.4 MWth industrial hydrogen burner based on a multi-stage radial hydrogen injection strategy基于多级径向氢气注入策略的1.4 MWth工业氢气燃烧器的设计、实验验证及负载依赖性数值评估
errApplied Thermal Engineering
IF6.9
err2026-09-12
err0
PREAI
errShuai Dong; Zhenyong Yang; Junchao Li; Yugang Li; Hongsheng Zhu; Xiaodong Li; Haitao Bai; Lei Li; Huaidong Wang; Yi Luo; Haopeng Wang
err分享
err收藏
Recent advances in binder jetting additive manufacturing of aluminum alloys: Densification mechanisms, processing strategies, and property enhancement铝基合金的喷墨粘结剂增材制造最新进展：致密化机制、加工策略及性能提升
errJournal of Alloys and Compounds
IF6.3
err2026-09-01
err0
PREAI
errLi, Yuyue; Zhang, Tianchang; Zhou, Weimin; Zhao, Ze; Li, Junchao
err分享
err收藏
Research on State Recognition in Aircraft Skin Laser Paint Stripping Based on the Fusion of LIBS Spectra and Surface Images基于激光诱导击穿光谱与表面图像融合的飞机蒙皮激光除漆状态识别研究
errSensors
IF3.5
err2026-05-19
err0
errOAAI
errHaijie Hua; Yongbo Wang; Tian Tan; Shaolong Li; Yu Cao; Zhongxian Tan; Junchao Li; Wenfeng Yang
err分享
err收藏
Multiscale Characterization and Evaluation of Low-Energy Bird-Strike Damage in CFRP低能鸟撞损伤在CFRP中的多尺度表征与评估
errMaterials
IF3.2
err2026-04-30
err0
errOAAI
errHongshuai Huang; Bowen Yang; Yu Cao; Zhongxian Tan; Junchao Li; Shaolong Li; Tian Tan; Wenfeng Yang
err分享
err收藏
Effect of substrate temperature on LIBS characteristic spectral signals in laser paint stripping of aluminum alloys激光喷漆去除铝合金过程中基底温度对LIBS特征光谱信号的影响
errApplied Optics
IF1.7
err2026-04-20
err0
PREAI
errYang, Wenfeng; Wang, Yongbo; Hua, Haijie; Qian, Ziran; Tan, Tian; Li, Shaolong; Tan, Zhongxian; Li, Junchao
err分享
err收藏
A bibliometric analysis of advances in N6‑methyladenosine research in colorectal cancer结直肠癌中N6-甲基腺苷研究进展的文献计量学分析
errDiscover Oncology
IF2.9
err2026-02-27
err0
errOAAI
errLejin Zhao; Ying Sun; Junchao Li; Wenlong Yang; Zaipan Wang; Benguo Yu; Le Du
err分享
err收藏
Dynamic spreading behavior of Mg-Zn-Zr powders in binder jetting additive manufacturing: Experiment and discrete element methodMg-zn-zr粉末在粘合剂喷射增材制造中的动态铺展行为: 实验和离散元法
errPOWDER TECHNOLOGY
IF4.6
err2026-01-21
err0
PREAI
errZhao, Ze; Yu, Minghuan; Li, Junchao; Tang, Yunlong; Lu, Zhongliang
err分享
err收藏
Centrifuge modeling of underwater explosion near the water-soil interface水下爆炸近水-土界面的离心模型试验
errPHYSICS OF FLUIDS
IF4.3
err2025-04-08
err0
PREAI
errZhang, Jing; Guan, Long-Hua; Li, Wei-Jun; Li, Jun-Chao; Wang, Yu-Bing
err分享
err收藏
Sintering Strengthening Mechanism of MgO Sintering Additives Added in Fabricating Al2O3 Ceramics Using Binder Jetting
errADVANCED ENGINEERING MATERIALS
IF3.3
err2025-03-01
err0
PREAI
errYu, Tianlin; Zhao, Ze; Li, Junchao
err分享
err收藏
Sintering and densification mechanism of SiC particle reinforced AZ91D magnesium matrix composite materials owing binder jetting基于粘结剂喷射的SiC颗粒增强AZ91D镁基复合材料烧结与致密化机制
errPOWDER TECHNOLOGY
IF4.6
err2025-02-01
err1
PREAI
errZhao, Ze; Zhang, Tianchang; Yang, Qiang; Li, Mei; Li, Junchao
err分享
err收藏
A stepwise sintering process for magnesium alloys fabricated by binder jetting additive manufacturing通过粘合剂喷射增材制造制造镁合金的逐步烧结工艺
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-02-01
err0
PREAI
errZhang, Tianchang; Li, Mei; Zhang, Junjie; Li, Junchao
err分享
err收藏
Study on the steady-state and dynamic rheological characteristics of five clayey materials
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2025-01-01
err0
PREAI
errWei, Xin; Li, Junchao; Sun, Zhonghao; Xu, Ling
err分享
err收藏
Effects of refined grains and doped nanoparticles on fabricating Al 2 O 3 ceramics using binder jetting
errCERAMICS INTERNATIONAL
IF5.6
err2024-09-01
err1
PREAI
errYu, Tianlin; Zhao, Ze; Li, Junchao
err分享
err收藏
Full liquid phase sintering of binder jetting printed magnesium alloy
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-12-01
err8
PREAI
errLi, Mei; Yang, Qiang; Zhao, Ze; Zhang, Junjie; Li, Junchao
err分享
err收藏
Characterization of PA12/HA composite scaffolds based on selective laser sintering
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2023-09-01
err7
PREAI
errYao, Dingrou; Zhao, Ze; Wu, Zhige; Li, Mei; Li, Junchao
err分享
err收藏
Mechanical properties and failure mechanisms of polyamide 12 gradient scaffolds developed with selective laser sintering
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2023-07-01
err9
PREAI
errZhao, Ze; Wu, Zhige; Yao, Dingrou; Wei, Yuan; Li, Junchao
err分享
err收藏
Surface Effect on Phase Transformation of Single Crystal NiTi Shape Memory Alloys Studied by Molecular Dynamics Simulation
errADVANCED ENGINEERING MATERIALS
IF3.3
err2023-06-21
err0
PREAI
errLiu, Bingfei; Wang, Yuyang; Li, Junchao; Wu, Wenping
err分享
err收藏
Gradient scaffolds developed by parametric modeling with selective laser sintering
errINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF9.4
err2023-06-01
err18
PREAI
errYao, Dingrou; Zhao, Ze; Wei, Yuan; Li, Junchao
err分享
err收藏
Effect of sintering temperature and sintering additives on the properties of alumina ceramics fabricated by binder jetting烧结温度和烧结助剂对喷射法制备氧化铝陶瓷性能的影响
errCERAMICS INTERNATIONAL
IF5.6
err2023-03-01
err13
PREAI
errYu, Tianlin; Zhao, Ze; Li, Junchao
err分享
err收藏
High strength and rapid solution Mg alloy by adding Fe element fabricated by binder jetting additive manufacturing
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-12-01
err9
PREAI
errSu, Chen; Wang, Jingfeng; Li, Hongyun; You, Zhipeng; Li, Junchao
err分享
err收藏

研究方向

增材制造装备与工艺多尺度/多材料定制化梯度性能拓扑结构与性能调控多尺度先进材料成形工艺有限元仿真基于增材制造的医工结合应用研究与生物医疗设备开发
合作学者
合作期刊
潘
潘曹峰 (Caofeng Pan)
H 指数: 103 · 论文数: 431
高宝玉 封面图
高宝玉 (Baoyu Gao)
H 指数: 93 · 论文数: 609
Y
Yun‐Ze Long
H 指数: 81 · 论文数: 664
R
Rui Zhu
H 指数: 76 · 论文数: 488
陈
陈苏 (Su Chen)
H 指数: 72 · 论文数: 677
查看更多