logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
D

Damjan Klobčar

Faculty of Mechanical Engineering

20H指数
121论文数
1.9K被引数
收录论文 37
发表时间
logo
Comparative ballistic analysis of cold war-era eastern european steel and composite military helmets冷战时期东欧钢制与复合材料军用头盔的对比弹道分析
errEngineering Failure Analysis
IF5.7
err2026-09-30
err0
PREAI
errHauck, Albert; Pecanac, Milan; Djukic, Vukota; Zabunov, Ivan; Rackov, Milan; Barczewski, Mateusz; Kaninski, Milica P. Marceta; Erceg, Tamara; Balos, Sebastian; Klobcar, Damjan
err分享
err收藏
Characterization and porosity analysis of arc-based directed energy deposition of AZ31 magnesium alloys using X-ray computed tomography利用X射线计算机断层扫描对基于电弧的能量沉积AZ31镁合金进行表征和孔隙率分析
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-08-27
err0
errOAAI
errMohammad Reza Ghavi; Yasir Beeran Potta Thara; Drago Bračun; Janez Povh; Hanuma Reddy Tiyyagura; Damjan Klobčar
err分享
err收藏
Mechanistic Structure–Property Relationships in Carbon/Polymer Composites: Connectivity, Junction Resistance, and Durability碳/聚合物复合材料的机理结构-性能关系：连通性、结电阻和耐久性
errPolymers
IF4.9
err2026-05-17
err0
errOAAI
errSachin Kumar Sharma; Reshab Pradhan; Lokesh Kumar Sharma; Yogesh Sharma; Yatendra Pal; Drago Bračun; Damjan Klobčar
err分享
err收藏
Microstructural Evolution in the Stir Zone of a Friction-Stir-Processed Microalloyed Al-Mn-Cu Alloy搅拌摩擦处理微合金化Al-Mn-Cu合金搅拌区的微观结构演化
errMetals
IF2.5
err2026-04-07
err0
errOAAI
errFranc Zupanič; Pamela Marcela Pineda Dominguez; Yan Lu; Torben Boll; Rafal Dunin-Borkowski; Lara Hočuršćak; Evelin Fisslthaler; Damjan Klobčar; Tonica Bončina
err分享
err收藏
Anisotropic investigation on morphology, mechanical, corrosion, and cavitation resistance of aluminum alloys produced by wire arc additive manufacturing
errJOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
IF0.4
err2025-10-01
err0
PREAI
errDurmus, Hulya; Comez, Nilay; Klobcar, Damjan; Gul, Canser
err分享
err收藏
Heat treatment optimisation of 18 % Ni maraging steel produced by DED-ARC for enhancing mechanical propertiesDED-ARC制备的18% Ni马氏体时效钢的热处理优化以增强力学性能
errJournal of Advanced Joining Processes
IF4
err2025-05-16
err0
errOAAI
errMaja Lindič; Damjan Klobčar; Aleš Nagode; Nikolaj Mole; Borut Žužek; Tomaž Vuherer
err分享
err收藏
Mitigating defects in directed energy deposited aluminium 5356 alloy through in-situ workpiece vibration
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-11-01
err0
errOAAI
errImsirovic, Mirza; Trdan, Uros; Klobcar, Damjan; Bracun, Drago; Nagode, Ales; Berthe, Laurent
err分享
err收藏
Impact of Ultrasonic Welding Parameters on Weldability and Sustainability of Solid Copper Wires with and without Varnish
errMATERIALS
IF3.2
err2024-10-15
err1
errOAAI
errLogar, Andraz; Klobcar, Damjan; Trdan, Uros; Nagode, Ales; Cernivec, Gregor; Vuherer, Tomaz
err分享
err收藏
Comparison between Mechanical Properties and Joint Performance of AA 2024-T351 Aluminum Alloy Welded by Friction Stir Welding, Metal Inert Gas and Tungsten Inert Gas Processes
errMATERIALS
IF3.2
err2024-07-05
err1
errOAAI
errMilcic, Miodrag; Klobcar, Damjan; Milcic, Dragan; Zdravkovic, Natasa; Duric, Aleksija; Vuherer, Tomaz
err分享
err收藏
Intrusive laser triangulation method for non-contact detection of voids in translucent composites
errNDT & E INTERNATIONAL
IF4.5
err2024-07-01
err1
errOAAI
errBracun, Drago; Selak, Luka; Klobcar, Damjan; Katic, Marko; Markucic, Damir
err分享
err收藏
Influence of Surface Preparation of Aluminum Alloy AW-5754 and Stainless Steel X5CRNI18-10 on the Properties of Bonded Joints
errMATERIALS
IF3.2
err2024-05-26
err0
errOAAI
errZdravkovic, Natasa; Klobcar, Damjan; Milcic, Dragan; Zupancic, Matevz; Zuzek, Borut; Milcic, Miodrag; Duric, Aleksija
err分享
err收藏
Influence of flux agent composition on the ionization potential in A-TIG welding of the electrolytic tough pitch copper (Cu-ETP) sheets助熔剂组成对电解韧铜 (cu-etp) 板的-TIG焊接中电离势的影响
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-03-01
err3
errOAAI
errBusic, Matija; Solic, Sanja; Tropsa, Vlado; Klobcar, Damjan
err分享
err收藏
Advanced Analysis of the Properties of Solid-Wire Electric Contacts Produced by Ultrasonic Welding and Soldering
errMATERIALS
IF3.2
err2024-01-09
err2
errOAAI
errLogar, Andraz; Klobcar, Damjan; Nagode, Ales; Trdan, Uros; Cernivec, Gregor; Sharma, Abhay
err分享
err收藏
Optimisation of precipitation hardening for 15-5 PH martensitic stainless steel produced by wire arc directed energy deposition
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2023-10-01
err6
errOAAI
errScetinec, Aljaz; Klobcar, Damjan; Nagode, Ales; Vuherer, Tomaz; Bracun, Drago; Trdan, Uros
err分享
err收藏
Towards an automated framework for the finite element computational modelling of directed energy deposition
errFINITE ELEMENTS IN ANALYSIS AND DESIGN
IF3.5
err2023-09-01
err9
errOAAI
errKovsca, Dejan; Starman, Bojan; Klobcar, Damjan; Halilovic, Miroslav; Mole, Nikolaj
err分享
err收藏
Tribological Evaluation of Vegetable Oil/MoS2 Nanotube-Based Lubrication of Laser-Textured Stainless Steel基于植物油/MoS2纳米管的激光织构不锈钢润滑的摩擦学评估
errMATERIALS
IF3.2
err2023-08-26
err1
errOAAI
errConradi, Marjetka; Podgornik, Bojan; Remskar, Maja; Klobcar, Damjan; Kocijan, Aleksandra
err分享
err收藏
A Review on Multiplicity in Multi-Material Additive Manufacturing: Process, Capability, Scale, and Structure多材料增材制造中的多重性: 过程，能力，规模和结构
errMATERIALS
IF3.2
err2023-07-26
err17
errOAAI
errVerma, Ayush; Kapil, Angshuman; Klobcar, Damjan; Sharma, Abhay
err分享
err收藏
High-cycle fatigue enhancement of dissimilar 2017A-T451/7075-T651 Al alloy joint fabricated by a single pass FSW without any post-processing
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-07-01
err6
errOAAI
errTrdan, Uros; Klobcar, Damjan; Berthe, Laurent; Sturm, Roman; Bergant, Zoran
err分享
err收藏
Machining Strategy Determination for Single- and Multi-Material Wire and Arc Additive Manufactured Thin-Walled Parts单材料和多材料线材和电弧增材制造薄壁零件的加工策略确定
errMATERIALS
IF3.2
err2023-03-02
err2
errOAAI
errOzaner, Ozan Can; Klobcar, Damjan; Sharma, Abhay
err分享
err收藏
Sustainable Hybrid Manufacturing of AlSi5 Alloy Turbine Blade Prototype by Robotic Direct Energy Layered Deposition and Subsequent Milling: An Alternative to Selective Laser Melting?
errMATERIALS
IF3.2
err2022-12-03
err7
errOAAI
errDugar, Jaka; Ikram, Awais; Klobcar, Damjan; Pusavec, Franci
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
B
Bojan Podgornik
H 指数: 48 · 论文数: 266
S
Saurav Goel
H 指数: 44 · 论文数: 230
M
Maja Remškar
H 指数: 42 · 论文数: 225
L
Laurent Berthe
H 指数: 40 · 论文数: 383
J
Jaka Tušek
H 指数: 37 · 论文数: 126
查看更多