logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
李

李毅波 (Yibo Li)

Central South University

18H指数
93论文数
1.2K被引数
收录论文 42
发表时间
logo
Cooperative Deformation Behavior and Its Influence on Wrinkling and Spring-Back in Hot-Stamped Al/CF/PEEK Hybrid Structures热冲压Al/CF/PEEK复合结构的协同变形行为及其对起皱和回弹的影响
errJournal of Manufacturing and Materials Processing
IF3.3
err2026-09-28
err0
errOAAI
errYan Lu; Songsong Zhang; Kaizhou Zhang; Jinsong Xiong; Yong Luo; Yibo Li; Yong Zhang
err分享
err收藏
Metallurgy-inspired multi-modal design and interfacial strengthening of heterogeneous lattice structures for superior compressive performance冶金启发式多模态设计与异质点阵结构的界面强化以实现卓越的压缩性能
errMATERIALS & DESIGN
IF7.9
err2026-09-22
err0
errOAAI
errBeiouyang Chen; Xiangyu Li; Yibo Li; Minghui Huang; Sheng Ding
err分享
err收藏
CNTs and Phosphoric Acid Anodizing synergistically enhance the interfacial properties of Al and CFRTP: A mechanism investigation of failure modes碳纳米管和磷酸阳极氧化协同增强铝和CFRTP的界面性能：失效模式的机理研究
errThin-Walled Structures
IF6.6
err2026-04-19
err0
PREAI
errWenzhao Li; Yibo Li; Minghui Huang
err分享
err收藏
Effect of Layup and Specimen Size on Spring-Back and Strength in Al/CF/PEEK Hybrid V-Parts铺层方式和试样尺寸对弹簧回弹和强度的影响：以Al/CF/PEEK混合V型件为例
errPolymer Composites
IF4.7
err2025-11-19
err0
PREAI
errYan Lu; Jinsong Liu; Qiang Yue; Lei Dong; Yong Zhang; Yibo Li
err分享
err收藏
Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring冷却速率对热塑性复合材料中残余应变演化及层间性能的影响及基于嵌入式FBG监测的研究
errPolymer Composites
IF4.7
err2025-10-24
err0
PREAI
errZijing Qu; Yibo Li; Minghui Huang
err分享
err收藏
Damage Evolution and Residual Strength Evaluation of Al/CFRTP Adhesive Joints Under Transverse Impact横向冲击下Al/CFRTP胶接接头的损伤演化与残余强度评估
errJournal of Composites Science 2025, Vol. 9, Page 490
IF3.7
err2025-09-27
err0
errOAAI
errXi Luan; Yulong Deng; Jun Chen; Yibo Li
err分享
err收藏
Investigation of Mixing of Solid Particles in a Plowshare Mixer Using Discrete Element Method (DEM)利用离散单元法（DEM）研究犁刀混合机中固体颗粒的混合
errMODELLING
IF1.5
err2025-09-22
err0
PREAI
errLuan, Xi; Li, Wenzhao; Li, Yibo; Zou, Junwei
err分享
err收藏
Numerical analysis of low-velocity impact damage in fiber metal laminate (FML) by introducing plasticity of fiber composite materials
errCOMPOSITE STRUCTURES
IF7.1
err2025-03-01
err0
PREAI
errLiu, Jinsong; Li, Yibo; Huang, Minghui; Zhang, Yong; Lu, Yan; Yue, Qiang
err分享
err收藏
Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould
errMATERIALS
IF3.2
err2025-01-09
err0
errOAAI
errDeng, Yulong; Deng, Nanzhou; Duan, Jintao; Li, Yibo; Gao, Qi; Ni, Weihua; Peng, Jingquan
err分享
err收藏
Study on organic carbon in medium-low mature shale oil reservoirs rich in type II kerogen: Oxidation behavior, thermal effect, and kinetics
errFUEL
IF7.5
err2025-01-01
err0
PREAI
errPu, Wanfen; Jin, Xing; Bai, Yuanyuan; Zhao, Shuai; He, Long; Li, Yibo; Li, Tao
err分享
err收藏
Prediction of low-velocity impact mechanical response and damage in thermoplastic composites considering elastoplastic behavior考虑弹塑性行为的热塑性复合材料低速冲击力学响应和损伤预测
errINTERNATIONAL JOURNAL OF IMPACT ENGINEERING
IF5.7
err2024-12-01
err1
PREAI
errLiu, Jinsong; Li, Yibo; Huang, Minghui; Zhang, Yong; Lu, Yan; Dong, Lei
err分享
err收藏
Optimization Design of Submerged-Entry-Nozzle Structure Using NSGA-II Genetic Algorithm in Ultra-Large Beam-Blank Continuous-Casting Molds
errMATERIALS
IF3.2
err2024-09-02
err1
errOAAI
errDeng, Nanzhou; Duan, Jintao; Li, Yibo; Gao, Qi; Deng, Yulong; Ni, Weihua
err分享
err收藏
Union channel pruning-based U2Net for online surface defect segmentation of aluminum strips in production processes
errJOURNAL OF INTELLIGENT MANUFACTURING
IF7.4
err2024-02-20
err0
PREAI
errLv, Zehua; Li, Yibo; Qian, Siying; Wu, Liuqing; Yang, Yi
err分享
err收藏
Investigation on creep mechanism of CF/PEEK composite material using molecular dynamicsCF/PEEK复合材料蠕变机理的分子动力学研究
errPOLYMER TESTING
IF6
err2023-12-01
err2
errOAAI
errLi, Wenzhao; Li, Yibo; Huang, Minghui
err分享
err收藏
Online visual end-to-end detection monitoring on surface defect of aluminum strip under the industrial few-shot condition
errJOURNAL OF MANUFACTURING SYSTEMS
IF14.2
err2023-10-01
err9
PREAI
errMa, Zhuxi; Li, Yibo; Huang, Minghui; Deng, Nanzhou
err分享
err收藏
Improved corrosion resistance of 2195 Al-Cu-Li alloy through T6I6 interrupted aging
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-09-01
err10
PREAI
errXia, Linyan; Li, Yibo; Huang, Minghui; Liu, Jinsong; Hu, Peng
err分享
err收藏
Comparison of the effects of femtosecond and nanosecond laser tailoring on the bonding performance of the heterojunction between PEEK/CFRP and Al-Li alloy
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2023-08-01
err4
PREAI
errChen, Jun; Li, Yibo; Huang, Minghui; Dong, Lei
err分享
err收藏
A novel method for generating random fiber distributions for fiber-reinforced materials
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2023-04-25
err1
PREAI
errZeng, Lang; Li, Yibo; Liu, Jinsong
err分享
err收藏
The effect of transverse low-velocity pre-impact on the residual strength of Al/PEEK/CFRTP adhesive joints
errINTERNATIONAL JOURNAL OF IMPACT ENGINEERING
IF5.7
err2022-10-01
err9
PREAI
errLiu, Jinsong; Li, Yibo; Huang, Minghui; Lu, Yan; Yang, Yuancheng
err分享
err收藏
Automated real-time detection of surface defects in manufacturing processes of aluminum alloy strip using a lightweight network architecture
errJOURNAL OF INTELLIGENT MANUFACTURING
IF7.4
err2022-04-18
err33
PREAI
errMa, Zhuxi; Li, Yibo; Huang, Minghui; Huang, Qianbin; Cheng, Jie; Tang, Si
err分享
err收藏

研究方向

热塑性纤维-金属混杂构件的热冲压一步成形航空整体壁板选择性增强结构的设计制造一体化机械系统与制造工艺过程的数字孪生巨型成形装备的优化设计与性能评估
合作学者
合作期刊
Y
Yi Yang
H 指数: 138 · 论文数: 1.3K
张
张勇 (Yong Zhang)
H 指数: 94 · 论文数: 1.1K
J
Jianguo Lin
H 指数: 61 · 论文数: 580
J
Jian Li
H 指数: 55 · 论文数: 738
李
李涛 (Tao Li)
H 指数: 51 · 论文数: 582
查看更多