logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Sumit Bahl

oak ridge national laboratory

29H指数
73论文数
3.1K被引数
收录论文 52
发表时间
logo
Ductility control in an additively manufactured Al-7Si-0.3Mg-0.5Cu-1Fe alloy through heat treatments通过热处理控制增材制造Al-7Si-0.3Mg-0.5Cu-1Fe合金的延展性
errMaterials Science and Engineering A-Structural Materials Properties Microstructure and Processing
IF7
err2026-09-16
err0
PREAI
errJovid Rakhmonov; Jonathan Poplawsky; Lawrence Allard; Sumit Bahl; Charles S. Hawkins; Alice Perrin; J. Allen Haynes; Alex Plotkowski; Amit Shyam
err分享
err收藏
Alloy design for sustainable aluminum high pressure die castings: A review针对可持续铝高压压铸件的合金设计：综述
errInternational Materials Reviews
IF15.5
err2026-08-03
err0
PREAI
errAmit Shyam; Alex Plotkowski; Qigui Wang; Andy Wang; Sumit Bahl; Jovid Rakhmonov; Martin Hartlieb; Ying Yang; Nicholas Richter; Gerry Knapp; Sunyong Kwon; Jiheon Jun; Dongwon Shin; J. Allen Haynes
err分享
err收藏
Improving creep resistance of Al-0.27Zr-0.08Sn (wt%) via cold swaging while maintaining high electrical conductivity通过冷锻工艺提高Al-0.27Zr-0.08Sn（wt%）的蠕变抗力，同时保持高电导率
errMaterials Science and Engineering A-Structural Materials Properties Microstructure and Processing
IF7
err2026-07-24
err0
PREAI
errIsmael E. Coello; Sumit Bahl; Jie Qi; Lawrence F. Allard; Chris M. Fancher; Amit Shyam; David C. Dunand
err分享
err收藏
A modified scheil approach for nucleation-dependent solidification pathways基于形核的凝固路径的改进谢依尔方法
errActa Materialia
IF9.3
err2026-05-05
err0
PREAI
errSun Yong Kwon; Ying Yang; Alex Plotkowski; Matt Rolchigo; Amit Shyam; Sumit Bahl; Nicholas A. Richter; James A. Haynes
err分享
err收藏
Optimization of Processing, Microstructure, and Hardness of an Al–Ce–Ni–Mn–Zr Alloy With Laser Additive Manufacturing激光增材制造对Al–Ce–Ni–Mn–Zr合金的加工、微观结构和硬度的优化
errAdvanced Engineering Materials
IF3.3
err2026-03-02
err0
PREAI
errDavid Fieser; Michael Lawton; Sumit Bahl; Amirkoushyar Ziabari; Tomas Grejtak; Janet M. Meier; Mason Smith; Alex Plotkowski; Elaine MacDonald; Anming Hu
err分享
err收藏
Strain-rate hardening enhances fatigue resistance of AlSi10Mg alloy at 350°C
errACTA MATERIALIA
IF9.3
err2026-01-21
err0
PREAI
errBahl, Sumit; Richter, Nicholas A.; Torbet, Chris; Rakhmonov, Jovid U.; Su, Yi Feng; Plotkowski, Alex; Pollock, Tresa M.; Shyam, Amit
err分享
err收藏
A high strength Al-2Ni-0.5Zr conductor alloy fabricated via laser powder bed fusion通过激光粉末床熔融制备的高强度Al-2Ni-0.5Zr导体合金
errMaterials Science and Engineering: A
IF0
err2025-10-10
err0
PREAI
errNicholas A. Richter; Jovid Rakhmonov; Jonathan D. Poplawsky; Alice E. Perrin; J. Allen Haynes; Amit Shyam; Alex Plotkowski; Sumit Bahl
err分享
err收藏
Creep ductility limiting mechanisms in an additively manufactured Al-Ce-Ni-Mn-Zr alloy增材制造Al-Ce-Ni-Mn-Zr合金中的蠕变延性限制机制
errAdditive Manufacturing
IF11.1
err2025-10-03
err0
PREAI
errJovid Rakhmonov; Obaidullah Rahman; Sumit Bahl; Amir Koushyar Ziabari; Alex Plotkowski; Amit Shyam
err分享
err收藏
Impact of droplet oxidation on mechanical properties of an Al-7Si-0.4Mg alloy fabricated with liquid metal jetting液滴氧化对采用液态金属喷射法制备的Al-7Si-0.4Mg合金力学性能的影响
errADDITIVE MANUFACTURING
IF11.1
err2025-04-01
err0
PREAI
errBahl, S; Knapp, GL; Gomez, A; Poplawsky, JD; Haynes, JA; Dehoff, RR; Plotkowski, A; Shyam, A
err分享
err收藏
Effect of Si impurities on microstructure and tensile properties of a cast Al-Mg-Fe alloySi杂质对铸造al-mg-fe合金组织和拉伸性能的影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-02-01
err1
PREAI
errRichter, Nicholas A.; Yang, Ying; Perrin, Alice E.; Kwon, Sun Yong; Plotkowski, Alex J.; Haynes, J. Allen; Shyam, Amit; Bahl, Sumit
err分享
err收藏
Corrosion evaluation of Al-Cu-Mn-Zr cast alloys in 3.5% NaCl solution
errNPJ MATERIALS DEGRADATION
IF7.6
err2024-11-09
err0
errOAAI
errJun, Jiheon; Shyam, Amit; Bahl, Sumit; Su, Yi-Feng; Haynes, J. Allen
err分享
err收藏
Dual X-ray computed tomography-aided classification of melt pool boundaries and flaws in crept additively manufactured parts
errMATERIALS CHARACTERIZATION
IF5.5
err2024-11-01
err0
PREAI
errRahman, Obaidullah; Rakhmonov, Jovid; Bahl, Sumit; Frederick, Curtis; Shyam, Amit; Dehoff, Ryan; Plotkowski, Alex; Ziabari, Amirkoushyar
err分享
err收藏
Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ′-strengthened Al-Cu alloys
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-10-01
err4
PREAI
errRakhmonov, J. U.; Qi, J.; Bahl, S.; Dunand, D. C.; Shyam, A.
err分享
err收藏
Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2024-08-01
err7
PREAI
errKwon, Sun Yong; Shin, Dongwon; Michi, Richard A.; Poplawsky, Jonathan D.; Wang, Hsin; Yang, Ying; Bahl, Sumit; Shyam, Amit; Plotkowski, Alex
err分享
err收藏
An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance一种高抗蠕变性的增材制造近共晶al-ce-ni-mn-zr合金
errACTA MATERIALIA
IF9.3
err2024-04-01
err8
PREAI
errBahl, Sumit; Wu, Tiffany; Michi, Richard A.; An, Ke; Yu, Dunji; Allard, Lawrence F.; Rakhmonov, Jovid U.; Poplawsky, Jonathan D.; Fancher, Chris M.; Dunand, David C.; Plotkowski, Alex; Shyam, Amit
err分享
err收藏
Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy
errADDITIVE MANUFACTURING
IF11.1
err2024-03-01
err4
PREAI
errRakhmonov, Jovid U.; Michi, Richard; Bahl, Sumit; Rahman, Obaidullah; Frederick, Curtis; Ziabari, Amir Koushyar; Dunand, David C.; Dehoff, Ryan; Plotkowski, Alex; Shyam, Amit
err分享
err收藏
Microcrack formation under normal and dwell fatigue of IMI 834
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-10-01
err11
PREAI
errYazar, K. U.; Bahl, S.; Mishra, S.; Sahu, V. K.; Bhattacharjee, A.; Banerjee, D.; Suwas, S.
err分享
err收藏
3D Printed eutectic aluminum alloy has facility for site-specific properties*3D打印共晶铝合金具有现场特定属性的设施 *
errADDITIVE MANUFACTURING
IF11.1
err2023-05-01
err6
errOAAI
errBahl, Sumit; Plotkowski, Alex; Watkins, Thomas R.; Michi, Richard A.; Stump, Benjamin; Leonard, Donovan N.; Poplawsky, Jonathan D.; Dehoff, Ryan; Shyam, Amit
err分享
err收藏
Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys
errACTA MATERIALIA
IF9.3
err2023-05-01
err7
errOAAI
errRakhmonov, J. U.; Milligan, B.; Bahl, S.; Ma, D.; Shyam, A.; Dunand, D. C.
err分享
err收藏
Additively manufactured Al-Ce-Ni-Mn alloy with improved elevated-temperature fatigue resistance*
errADDITIVE MANUFACTURING
IF11.1
err2023-03-01
err9
errOAAI
errMichi, Richard A.; Simpson, Joseph J.; Bahl, Sumit; Campbell, Quinn; Brackman, Paul; Plotkowski, Alex; Dehoff, Ryan R.; Haynes, J. A.; Wang, Qigui; Shyam, Amit
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
Yang REN 封面图
Yang REN (Yang Ren)
H 指数: 132 · 论文数: 1.7K
D
David C. Dunand
H 指数: 86 · 论文数: 709
K
Ke An
H 指数: 74 · 论文数: 575
L
Lawrence F. Allard
H 指数: 70 · 论文数: 349
T
T. Ungár
H 指数: 69 · 论文数: 355
查看更多