Zhenping Feng - Publications, H-index & Citations

Zhenping Feng

xi'an jiaotong university

34H指数

444论文数

5.8K被引数

收录论文 102

发表时间

An experimental and numerical study on particle deposition in a U-shaped ribbed cooling channel under high-temperature conditions 高温条件下U形带肋冷却通道内颗粒沉积的实验与数值研究

International Journal of Heat and Mass Transfer

IF5.8

2026-05-31

PREAI

Guohuang Cai; Jialong Li; Zheng Huang; Xing Yang; Yi Wang; Jiaxu Yao; Zhenping Feng

A multi-strategy optimization comparison of aerothermal performance for an asymmetric cavity bottom squealer tip using a generative adversarial network-based surrogate model 基于生成对抗网络的代理模型对非对称腔底凹坑叶尖气动热性能的多策略优化比较

Aerospace Science and Technology

IF5.8

2026-03-20

PREAI

Yong Tao; Zhao Liu; Zhenping Feng

Effects of film extraction on unsteady flow dynamics and heat transfer of novel impingement drainage cooling by large eddy simulation

International Journal of Heat and Mass Transfer

IF5.8

2026-02-01

PREAI

Huihui Wang; Yiyi Chen; Qinghua Deng; Xiying Niu; Zhenping Feng

公式章 1 节 1Numerical investigation on film cooling and aerodynamic performance of squealer tip with curved film holes 公式章 1 节 1：对带曲线形气膜孔的凹槽式叶尖的气膜冷却和气动性能的数值研究

International Communications in Heat and Mass Transfer

IF6.4

2025-12-12

PREAI

Yuhui Han; Zhao Liu; Yong Tao; Yudong Liu; Zhenping Feng

Corrigendum to ‘Cooperative optimization of cooling units arrangement on gas turbine endwall with generating adversarial network-based surrogate models’ [Energy 323 (2025) 135809]勘误：‘使用基于生成对抗网络的代理模型协同优化燃气轮机端壁冷却单元布置’ [Energy 323 (2025) 135809]

Energy

IF9.4

2025-12-01

PREAI

Yu Song; Zhao Liu; Yuhui Han; Weixin Zhang; Zhenping Feng

Aerothermal performance optimization of uncooled asymmetric cavity bottom blade squealer tip with generative adversarial network-based surrogate model 基于生成对抗网络的未冷却非对称腔底叶尖凹坑热气动性能优化

Energy

IF9.4

2025-11-27

PREAI

Yong Tao; Zhao Liu; Zhenping Feng

Investigation of aerothermal coupling of double-wall cooling structure for turbine guide-vane suction surface with varying film plate thicknesses 涡轮导叶吸力面双壁冷却结构中变膜板厚度的气热耦合研究

International Communications in Heat and Mass Transfer

IF6.4

2025-11-21

PREAI

Xinyu Lv; Qingsong Hu; Yi Wang; Xiangyu Wang; Zhenping Feng

Flow and conjugated heat transfer characteristics of swirl-rib-film composite cooling in gas turbine leading-edge 气轮机前缘旋流-肋片-薄膜复合冷却的流动及共轭传热特性

Thermal Science and Engineering Progress

IF5.4

2025-10-18

PREAI

Kun Xiao; Chenhao He; Zhenping Feng

Study on a novel target rectifier featuring anisotropic flow resistance for enhancing double-wall cooling 研究一种具有各向异性流动阻力特征的新型目标整流器，以增强双壁冷却

Applied Thermal Engineering

IF6.9

2025-09-30

PREAI

Qingsong Hu; Zhenping Feng; Shanghong Gao; Kefeng Yang; Yi Wang; Xiangyu Wang

Heat transfer enhancement by micro-particle-laden flows inside a ribbed cooling passage of gas turbine blades 燃气涡轮叶片肋片冷却通道内载微颗粒流动的热传递强化

International Journal of Heat and Mass Transfer

IF5.8

2025-08-18

PREAI

Ze Long; Xing Yang; Zhenping Feng

Optimization on Aerothermal Characteristics of Gas Turbine Vanes under Various Stacking Structures based on Deep-Leaning Surrogate Model 基于深度学习代理模型对不同堆叠结构下燃气轮机叶片气动热特性的优化

Aerospace Science and Technology

IF5.8

2025-07-21

PREAI

Shanghong Gao; Kefeng Yang; Xiangyu Wang; Yi Wang; Qingsong Hu; Zhao Liu; Zhenping Feng

An investigation on aerothermal performance of squealer tip with baffle arranged above film holes—Part Ⅰ: Film cooling performance 关于带挡板布置在薄膜孔上方的涡腔封严尖缘的气动热性能研究——第一部分：薄膜冷却性能

international journal of numerical methods for heat fluid flow

IF3.1

2025-05-08

PREAI

Yong Tao; Zhao Liu; Yuhui Han; Yudong Liu; Zhenping Feng

Investigation on the cooling characteristic of turbine endwall with mid-passage gap misalignment 涡轮端壁中段通道间隙错位对其冷却特性的研究

THERMAL SCIENCE AND ENGINEERING PROGRESS

IF5.4

2025-05-01

PREAI

Song, Yu; Liu, Zhao; Ding, Yuqiang; Feng, Zhenping

Cooperative optimization of cooling units arrangement on gas turbine endwall with generating adversarial network-based surrogate models 基于生成对抗网络代理模型的燃气轮机端壁冷却单元布置的协同优化

ENERGY

IF9.4

2025-05-01

PREAI

Song, Yu; Liu, Zhao; Han, Yuhui; Zhang, Weixin; Feng, Zhenping

Experimental characterization of particulate deposition on turbine vane leading-edge models with various showerhead cooling geometries

INTERNATIONAL JOURNAL OF THERMAL SCIENCES

IF5

2025-04-01

PREAI

Yang, Xing; Hao, Zihan; Feng, Zhenping

Comparisons between forward- and backward-inclined film injection over an effusion wall with internal jet-array impingement: Cooling effectiveness, heat transfer, and analytical model

APPLIED THERMAL ENGINEERING

IF6.9

2025-03-01

PREAI

Wu, Hang; Yang, Xing; Liu, Zhao; Feng, Zhenping

Comprehensive evaluation of phantom cooling design on turbine blade endwall with typical cooling layout

AEROSPACE SCIENCE AND TECHNOLOGY

IF5.8

2025-03-01

PREAI

Song, Yu; Liu, Zhao; Zhang, Weixin; Lu, Yixuan; Feng, Zhenping

Flow mechanism and back gap windage loss of a sCO2 radial inflow turbine with impeller scallops

JOURNAL OF SUPERCRITICAL FLUIDS

IF4.4

2025-02-01

PREAI

Zhao, Zhuobin; Liao, Jianxin; Deng, Qinghua; Li, Jun; Feng, Zhenping

Flow and heat transfer characteristics of a novel jet impingement cooling with multi-layer drainage channels at blade leading edge

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

IF6.4

2025-02-01

PREAI

Wang, Huihui; Deng, Qinghua; Feng, Zhenping

Contaminant dust effects on mist cooling in ribbed U-shaped channels of gas turbine blades

APPLIED THERMAL ENGINEERING

IF6.9

2025-01-01

PREAI

Hu, Chaozong; Yang, Xing; Huang, Yichen; Feng, Zhenping

研究方向