logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

S.G. Shabestari

school of materials and metallurgical engineering

38H指数
159论文数
4.4K被引数
收录论文 77
发表时间
logo
Hybrid WAAM–FSW processing of 316L stainless steel: joint integrity, microstructural refinement, and tensile response316L不锈钢的混合WAAM–FSW加工：接头完整性、微观结构细化和拉伸响应
errProgress in Additive Manufacturing
IF5.4
err2026-08-29
err0
PREAI
errMohammad Amin Zarei; Moein G. Shabestari; Saeed G. Shabestari; Hamid Reza Abedi
err分享
err收藏
Process-structure-property correlation in friction stir welded WAAM 316L stainless steel: Effects of welding parameters on flexural response and microhardness
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-21
err0
errOAAI
errMohammad Amin Zarei; Moein G. Shabestari; Saeed G. Shabestari; Hamidreza Abedi
err分享
err收藏
The Effect of Cooling Rate and Calcium Content on Mechanical Properties and the Solidification Characteristics of ZX Magnesium Alloys Using Cooling Curve Thermal Analysis冷却速率和钙含量对ZX镁合金力学性能和凝固特性的影响：基于冷却曲线热分析
errJournal of Materials Research and Technology
IF6.6
err2026-05-27
err0
errOAAI
errMoein G. Shabestari; Mojtaba Hatef; Saeed G. Shabestari
err分享
err收藏
Monte Carlo simulation for prediction of grain growth kinetics and limiting grain size of Fe–Si-containing AA8011 alloy during the annealing退火过程中Fe–Si含量AA8011合金晶粒长大动力学和极限晶粒尺寸的蒙特卡罗模拟预测
errJournal of Materials Research and Technology
IF6.6
err2026-04-17
err0
errOAAI
errM. Talebi; A.R. Eivani; S.G. Shabestari
err分享
err收藏
Driving the fracture mode transition in automotive dissimilar spot Welds: A study on DP590/HSLA440 joints驱动汽车异种点焊的断裂模式转变：DP590/HSLA440接头的研究
errJournal of Materials Research and Technology
IF6.6
err2026-02-26
err0
errOAAI
errAmir Siavash Mojaver; Saeed G. Shabestari; Rouholah Ashiri
err分享
err收藏
The Effect of Cooling Rate and Calcium Content of the ZX Magnesium Alloys on Dendrite Coherency Point and Hot Cracking Susceptibility Investigated Through Thermal Analysis通过热分析研究ZX镁合金冷却速率和钙含量对枝晶共格点及热裂敏感性的影响
errInternational Journal of Metalcasting
IF2.5
err2026-02-17
err0
PREAI
errMoein G. Shabestari; Mojtaba Hatef; Saeed G. Shabestari
err分享
err收藏
Microstructural evaluation and mechanical properties of semi-solid cast AZ91 and AZ91-1%Ca magnesium alloy through rotating container process半固态浇铸AZ91和AZ91-1%Ca镁合金通过旋转容器工艺的微观结构评价和力学性能
errmaterials science and engineering: a
IF0
err2026-02-10
err0
PREAI
errE. Ghaniabadi; S.G. Shabestari; E. Heidari
err分享
err收藏
Facilitated low-temperature continuous dynamic recrystallization in selectively laser melted AlSi10Mg alloy在选择性激光熔化AlSi10Mg合金中促进低温连续动态再结晶
errJournal of Alloys and Compounds
IF6.3
err2025-08-28
err0
PREAI
errMoein G. Shabestari; H.R. Abedi; B.R. Ghashghayi; Saeed G. Shabestari; Peter Minarik
err分享
err收藏
Evaluation of yttria-stabilized zirconia reinforced Inconel 625 superalloy composite powders appropriate for SLM process评估适用于SLM工艺的 yttria-stabilized zirconia 增强的 Inconel 625 超合金复合粉末
errJournal of Materials Research and Technology
IF6.6
err2025-08-24
err0
errOAAI
errM. Mirzaei; S.G. Shabestari; B. Mohammad Sadeghi; M. Amirjan; M. Divandari
err分享
err收藏
Effect of inert gas blowing on the microstructure and mechanical properties of semi-solid cast Al-20%Mg2Si composite惰性气体吹扫对半固态铸造Al-20%Mg2Si复合材料微观结构和力学性能的影响
errJournal of Materials Research and Technology
IF6.6
err2025-07-16
err0
PREAI
errMoein G. Shabestari; Ahad Nasimi Asl; Saeed G. Shabestari
err分享
err收藏
Microstructural heterogeneity and anisotropic mechanical propertiers of titanium alloys manufactured by wire arc additive manufacturing: A review钛合金丝材电弧增材制造中的微观结构异质性与各向异性力学性能：综述
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-05-01
err0
errOAAI
errZarei, Mohammad amin; Shabestari, Moein G.; Shabestari, Saeed G.; Abedi, Hamidreza
err分享
err收藏
Investigation of high-performance Cu-oxide/black TiO2; heterojunction photocatalytic fabricated by pulsed anodization on the Cu-foam高性能氧化铜/黑色TiO2的研究脉冲阳极氧化法制备铜泡沫异质结光催化材料
errMATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
IF4.6
err2025-03-01
err0
PREAI
errMohammadi, K.; Shabestari, S. G.; Divandari, M.
err分享
err收藏
Investigation on nanocrystallization, thermal stability and hardness of amorphous Al86Cu6Y6Co2 alloy
errJOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
IF3.1
err2025-01-19
err0
PREAI
errSalehi, M.; Shabestari, S. G.; Dadashi, M.
err分享
err收藏
Microstructural analysis and mechanical properties of Ni35Co25.5Al16Fe15.5Cr8 high-entropy alloy in the as-cast and homogenized conditions
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-01-01
err0
errOAAI
errPourferiedouni, A.; Shabestari, S. G.
err分享
err收藏
High-temperature flow softening behavior of additively manufactured AlSi10Mg alloy
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-12-25
err0
PREAI
errGhashghay, B. Rozegari; Abedi, H. R.; Shabestari, S. G.; Minarik, Peter
err分享
err收藏
Microstructure, mechanical properties and bio-corrosion behavior of Mg-2Zn-0.3Ca-x (x=0, 0.5, 1.0) Y alloys
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-07-01
err1
errOAAI
errMozaffari, F.; Salehi, M.; Shabestari, S. G.
err分享
err收藏
The effect of Cu-8%P master alloy, SIMA process, thixoforming, and heat treatment on the microstructure and mechanical properties of Al-20% Mg2Si composite
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-05-01
err3
errOAAI
errNazarizade, B.; Shabestari, S. G.; Najafi, Y.
err分享
err收藏
A novel criterion for predicting the glass-forming ability in Zr-Cu-Al ternary alloys: A molecular dynamics study预测zr-cu-al三元合金中玻璃形成能力的新标准: 分子动力学研究
errINTERMETALLICS
IF4.8
err2024-01-01
err4
PREAI
errAbbasi, M. H.; Tavakoli, R.; Shabestari, S. G.
err分享
err收藏
Effect of strain-induced melt activation process and thixoforming on microstructure and mechanical properties of 319 aluminum alloy
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-09-01
err9
PREAI
errRagheb, Z. Delbari; Shabestari, S. G.; Najafi, Y.
err分享
err收藏
Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kinetics
errJOURNAL OF NON-CRYSTALLINE SOLIDS
IF3.5
err2023-08-01
err2
PREAI
errNaghdali, Saeedeh; Shabestari, Saeed G.; Saghafian, Hassan; Ramasamy, Parthiban; Spieckermann, Florian; Chen, Zhuo; Zhang, Zaoli; Eckert, Juergen
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
A
Akihisa Inoue
H 指数: 126 · 论文数: 2.5K
J
J. Eckert
H 指数: 114 · 论文数: 1.8K
A
Akira Inoue
H 指数: 55 · 论文数: 702
K
Kunio Yubuta
H 指数: 49 · 论文数: 424
H
H.R. Abedi
H 指数: 47 · 论文数: 224
查看更多