S. Golak - Publications, H-index & Citations

S. Golak

Silesian University of Technology

12H指数

82论文数

483被引数

收录论文 14

发表时间

Numerical Optimization of the Coil Geometry in a Large-Scale Levitation Melting Device—With Titanium as a Case Study 大型悬浮熔炼设备中线圈几何形状的数值优化——以钛为例

energies

IF0

2025-08-06

OAAI

Sławomir Golak; Radosław Zybała

Numerical Modeling and Optimization of Large-Scale Molten Titanium Levitation

MATERIALS

IF3.2

2025-03-13

OAAI

Golak, Slawomir; Wycislik, Jakub; Zybala, Radoslaw; Hanusek, Robert

Hybrid numerical 3D model of electromagnetic levitation of molten metal

APPLIED THERMAL ENGINEERING

IF6.9

2025-01-01

PREAI

Golak, Slawomir; Geuzaine, Christophe; Przylucki, Roman; Nycz, Blazej; Henrotte, Francois

On the Development of a Digital Twin for Underwater UXO Detection Using Magnetometer-Based Data in Application for the Training Set Generation for Machine Learning Models

SENSORS

IF3.5

2023-07-30

OAAI

Blachnik, Marcin; Przylucki, Roman; Golak, Slawomir; Sciegienka, Piotr; Wieczorek, Tadeusz

A Simulation Model for the Inductor of Electromagnetic Levitation Melting and Its Validation 电磁悬浮熔炼感应器的仿真模型及其验证

MATERIALS

IF3.2

2023-06-27

OAAI

Nycz, Blazej; Przylucki, Roman; Malinski, Lukasz; Golak, Slawomir

Modelling of the Flow in the Process of Washing Out Automotive Catalyst Carriers with the PbLi Alloy

MATERIALS

IF3.2

2022-04-26

OAAI

Saternus, Mariola; Fornalczyk, Agnieszka; Gasior, Wladyslaw; Debski, Adam; Terlicka, Sylwia; Golak, Slawomir; Cieplinski, Piotr

Analysis of Al-Zn alloy refining in an industrial induction skull melter with two crucible types

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2021-11-01

PREAI

Bulinski, Piotr; Smolka, Jacek; Golak, Slawomir; Przylucki, Roman; Palacz, Michal; Siwiec, Grzegorz; Melka, Bartlomiej; Blacha, Leszek

Experimental Analysis of the Aluminium Melting Process in Industrial Cold Crucible Furnaces 工业冷坩埚炉熔铝过程的实验分析

METALS AND MATERIALS INTERNATIONAL

IF4

2019-07-25

OAAI

Palacz, Michal; Melka, Bartlomiej; Wecki, Bartosz; Siwiec, Grzegorz; Przylucki, Roman; Bulinski, Piotr; Golak, Slawomir; Blacha, Leszek; Smolka, Jacek

Numerical examination of the evaporation process within a vacuum induction furnace with a comparison to experimental results 真空感应炉内蒸发过程的数值检查，并与实验结果进行比较

APPLIED THERMAL ENGINEERING

IF6.9

2019-03-01

PREAI

Bulinski, Piotr; Smolka, Jacek; Siwiec, Grzegorz; Blacha, Leszek; Golak, Slawomir; Przylucki, Roman; Palacz, Michal; Melka, Bartlomiej

Numerical modelling of multiphase flow and heat transfer within an induction skull melting furnace 感应颅骨熔炼炉内多相流和传热的数值模拟

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2018-11-01

PREAI

Bulinski, Piotr; Smolka, Jacek; Golak, Slawomir; Przylucki, Roman; Palacz, Michal; Siwiec, Grzegorz; Melka, Bartlomiej; Blacha, Leszek

Numerical and experimental investigation of heat transfer process in electromagnetically driven flow within a vacuum induction furnace 真空感应炉内电磁驱动流动传热过程的数值和实验研究

APPLIED THERMAL ENGINEERING

IF6.9

2017-09-01

PREAI

Bulinski, Piotr; Smolka, Jacek; Golak, Slawomir; Przylucki, Roman; Palacz, Michal; Siwiec, Grzegorz; Lipart, Jakub; Bialecki, Ryszard; Blacha, Leszek

Creating Local Reinforcement of a Channel in a Composite Casting Using Electromagnetic Separation

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2015-09-01

PREAI

Golak, Slawomir; Dyzia, Maciej

Investigation of the influence of supply parameters on the velocity of molten metal in a metallurgical reactor used for platinum recovery

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING

IF4.4

2015-01-01

PREAI

Fornalczyk, A.; Golak, S.; Przylucki, R.

Influence of the geometry of the arrangement inductor - crucible to the velocity of the transport of mass in the liquid metallic phase mixed inductive

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING

IF4.4

2011-01-01

PREAI

Przylucki, R.; Golak, S.; Oleksiak, B.; Blacha, L.

研究方向